From b5b16c5296c3276bb409a948173d557241b74379 Mon Sep 17 00:00:00 2001 From: Cliff Brake Date: Thu, 12 Apr 2007 01:35:43 -0400 Subject: [PATCH] Input: ucb1400 - make delays configurable This patch adds module parameters for several timing values used in the driver. These values can vary based on the hardware design and how much capacitive filtering there is on the touch panel inputs, and the resistance of the panel. Signed-off-by: Cliff Brake Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 5200f4cbfe01..24000f0efeaa 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -97,6 +97,8 @@ struct ucb1400 { }; static int adcsync; +static int ts_delay = 55; /* us */ +static int ts_delay_pressure; /* us */ static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg) { @@ -159,6 +161,7 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb) UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + udelay(ts_delay_pressure); return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY); } @@ -180,7 +183,7 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb) UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); - udelay(55); + udelay(ts_delay); return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY); } @@ -203,7 +206,7 @@ static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb) UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); - udelay(55); + udelay(ts_delay); return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX); } @@ -571,7 +574,15 @@ static void __exit ucb1400_ts_exit(void) driver_unregister(&ucb1400_ts_driver); } -module_param(adcsync, int, 0444); +module_param(adcsync, bool, 0444); +MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin."); + +module_param(ts_delay, int, 0444); +MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us."); + +module_param(ts_delay_pressure, int, 0444); +MODULE_PARM_DESC(ts_delay_pressure, + "delay between panel setup and pressure read. Default = 0us."); module_init(ucb1400_ts_init); module_exit(ucb1400_ts_exit); -- 2.20.1