From b54aaa8a4fd829ecffa140b04b59d08ffe20a790 Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Tue, 10 Jan 2017 12:30:45 +0530 Subject: [PATCH] mmc: sdhci-msm: Factor out sdhci_msm_hc_select_mode This factors out sdhci_msm_hc_select_mode to later use it during enhanced_strobe mode select. It also further breaks sdhci_msm_hc_select_mode into separate functions for configuring HS400 mode or other modes. Signed-off-by: Ritesh Harjani Tested-by: Jeremy McNicoll Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 201 ++++++++++++++++++++--------------- 1 file changed, 114 insertions(+), 87 deletions(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 32879b845b75..1e4264703335 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -464,6 +464,119 @@ static int msm_init_cm_dll(struct sdhci_host *host) return 0; } +static void msm_hc_select_default(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + u32 config; + + if (!msm_host->use_cdclp533) { + config = readl_relaxed(host->ioaddr + + CORE_VENDOR_SPEC3); + config &= ~CORE_PWRSAVE_DLL; + writel_relaxed(config, host->ioaddr + + CORE_VENDOR_SPEC3); + } + + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_MCLK_SEL_MASK; + config |= CORE_HC_MCLK_SEL_DFLT; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + + /* + * Disable HC_SELECT_IN to be able to use the UHS mode select + * configuration from Host Control2 register for all other + * modes. + * Write 0 to HC_SELECT_IN and HC_SELECT_IN_EN field + * in VENDOR_SPEC_FUNC + */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_SELECT_IN_EN; + config &= ~CORE_HC_SELECT_IN_MASK; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + + /* + * Make sure above writes impacting free running MCLK are completed + * before changing the clk_rate at GCC. + */ + wmb(); +} + +static void msm_hc_select_hs400(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + u32 config, dll_lock; + int rc; + + /* Select the divided clock (free running MCLK/2) */ + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config &= ~CORE_HC_MCLK_SEL_MASK; + config |= CORE_HC_MCLK_SEL_HS400; + + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + /* + * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC + * register + */ + if (msm_host->tuning_done && !msm_host->calibration_done) { + config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); + config |= CORE_HC_SELECT_IN_HS400; + config |= CORE_HC_SELECT_IN_EN; + writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); + } + if (!msm_host->clk_rate && !msm_host->use_cdclp533) { + /* + * Poll on DLL_LOCK or DDR_DLL_LOCK bits in + * CORE_DLL_STATUS to be set. This should get set + * within 15 us at 200 MHz. + */ + rc = readl_relaxed_poll_timeout(host->ioaddr + + CORE_DLL_STATUS, + dll_lock, + (dll_lock & + (CORE_DLL_LOCK | + CORE_DDR_DLL_LOCK)), 10, + 1000); + if (rc == -ETIMEDOUT) + pr_err("%s: Unable to get DLL_LOCK/DDR_DLL_LOCK, dll_status: 0x%08x\n", + mmc_hostname(host->mmc), dll_lock); + } + /* + * Make sure above writes impacting free running MCLK are completed + * before changing the clk_rate at GCC. + */ + wmb(); +} + +/* + * sdhci_msm_hc_select_mode :- In general all timing modes are + * controlled via UHS mode select in Host Control2 register. + * eMMC specific HS200/HS400 doesn't have their respective modes + * defined here, hence we use these values. + * + * HS200 - SDR104 (Since they both are equivalent in functionality) + * HS400 - This involves multiple configurations + * Initially SDR104 - when tuning is required as HS200 + * Then when switching to DDR @ 400MHz (HS400) we use + * the vendor specific HC_SELECT_IN to control the mode. + * + * In addition to controlling the modes we also need to select the + * correct input clock for DLL depending on the mode. + * + * HS400 - divided clock (free running MCLK/2) + * All other modes - default (free running MCLK) + */ +void sdhci_msm_hc_select_mode(struct sdhci_host *host) +{ + struct mmc_ios ios = host->mmc->ios; + + if (ios.timing == MMC_TIMING_MMC_HS400) + msm_hc_select_hs400(host); + else + msm_hc_select_default(host); +} + static int sdhci_msm_cdclp533_calibration(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -894,7 +1007,6 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); struct mmc_ios curr_ios = host->mmc->ios; - u32 config, dll_lock; int rc; if (!clock) { @@ -913,93 +1025,8 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) curr_ios.timing == MMC_TIMING_MMC_DDR52 || curr_ios.timing == MMC_TIMING_MMC_HS400) clock *= 2; - /* - * In general all timing modes are controlled via UHS mode select in - * Host Control2 register. eMMC specific HS200/HS400 doesn't have - * their respective modes defined here, hence we use these values. - * - * HS200 - SDR104 (Since they both are equivalent in functionality) - * HS400 - This involves multiple configurations - * Initially SDR104 - when tuning is required as HS200 - * Then when switching to DDR @ 400MHz (HS400) we use - * the vendor specific HC_SELECT_IN to control the mode. - * - * In addition to controlling the modes we also need to select the - * correct input clock for DLL depending on the mode. - * - * HS400 - divided clock (free running MCLK/2) - * All other modes - default (free running MCLK) - */ - if (curr_ios.timing == MMC_TIMING_MMC_HS400) { - /* Select the divided clock (free running MCLK/2) */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); - config &= ~CORE_HC_MCLK_SEL_MASK; - config |= CORE_HC_MCLK_SEL_HS400; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); - /* - * Select HS400 mode using the HC_SELECT_IN from VENDOR SPEC - * register - */ - if (msm_host->tuning_done && !msm_host->calibration_done) { - /* - * Write 0x6 to HC_SELECT_IN and 1 to HC_SELECT_IN_EN - * field in VENDOR_SPEC_FUNC - */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); - config |= CORE_HC_SELECT_IN_HS400; - config |= CORE_HC_SELECT_IN_EN; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); - } - if (!msm_host->clk_rate && !msm_host->use_cdclp533) { - /* - * Poll on DLL_LOCK or DDR_DLL_LOCK bits in - * CORE_DLL_STATUS to be set. This should get set - * within 15 us at 200 MHz. - */ - rc = readl_relaxed_poll_timeout(host->ioaddr + - CORE_DLL_STATUS, - dll_lock, - (dll_lock & - (CORE_DLL_LOCK | - CORE_DDR_DLL_LOCK)), 10, - 1000); - if (rc == -ETIMEDOUT) - pr_err("%s: Unable to get DLL_LOCK/DDR_DLL_LOCK, dll_status: 0x%08x\n", - mmc_hostname(host->mmc), dll_lock); - } - } else { - if (!msm_host->use_cdclp533) { - config = readl_relaxed(host->ioaddr + - CORE_VENDOR_SPEC3); - config &= ~CORE_PWRSAVE_DLL; - writel_relaxed(config, host->ioaddr + - CORE_VENDOR_SPEC3); - } - - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); - config &= ~CORE_HC_MCLK_SEL_MASK; - config |= CORE_HC_MCLK_SEL_DFLT; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); - - /* - * Disable HC_SELECT_IN to be able to use the UHS mode select - * configuration from Host Control2 register for all other - * modes. - * Write 0 to HC_SELECT_IN and HC_SELECT_IN_EN field - * in VENDOR_SPEC_FUNC - */ - config = readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC); - config &= ~CORE_HC_SELECT_IN_EN; - config &= ~CORE_HC_SELECT_IN_MASK; - writel_relaxed(config, host->ioaddr + CORE_VENDOR_SPEC); - } - - /* - * Make sure above writes impacting free running MCLK are completed - * before changing the clk_rate at GCC. - */ - wmb(); + sdhci_msm_hc_select_mode(host); rc = clk_set_rate(msm_host->clk, clock); if (rc) { -- 2.20.1