From b5015e92a041443f8f4d5fd89e68ccaa672ccbe2 Mon Sep 17 00:00:00 2001 From: Mark yao Date: Mon, 31 Jul 2017 17:49:37 +0800 Subject: [PATCH] drm/rockchip: vop: no need wait vblank on crtc enable Since atomic framework, crtc enable and disable are in pairs, no need to wait vblank. Signed-off-by: Mark Yao Reviewed-by: Sandy huang Link: https://patchwork.freedesktop.org/patch/msgid/1501494577-6884-1-git-send-email-mark.yao@rock-chips.com --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 36 --------------------- 1 file changed, 36 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index ab18659e2a6f..eb326495ebeb 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -895,42 +895,6 @@ static void vop_crtc_atomic_enable(struct drm_crtc *crtc, return; } - /* - * If dclk rate is zero, mean that scanout is stop, - * we don't need wait any more. - */ - if (clk_get_rate(vop->dclk)) { - /* - * Rk3288 vop timing register is immediately, when configure - * display timing on display time, may cause tearing. - * - * Vop standby will take effect at end of current frame, - * if dsp hold valid irq happen, it means standby complete. - * - * mode set: - * standby and wait complete --> |---- - * | display time - * |---- - * |---> dsp hold irq - * configure display timing --> | - * standby exit | - * | new frame start. - */ - - reinit_completion(&vop->dsp_hold_completion); - vop_dsp_hold_valid_irq_enable(vop); - - spin_lock(&vop->reg_lock); - - VOP_REG_SET(vop, common, standby, 1); - - spin_unlock(&vop->reg_lock); - - wait_for_completion(&vop->dsp_hold_completion); - - vop_dsp_hold_valid_irq_disable(vop); - } - pin_pol = BIT(DCLK_INVERT); pin_pol |= (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIT(HSYNC_POSITIVE) : 0; -- 2.20.1