From b3a70f0bc32d1b70584bcaa6019fa4260b0da92e Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 13 Nov 2009 14:12:16 -0600 Subject: [PATCH] mtd: eLBC NAND: increase bus timeout to maximum When a NAND operation is in progress, all other localbus operations (including NOR flash) will have to wait for access to the bus. However, the NAND operation may take longer to complete than the default timeout. Thus, if NOR is accessed while a NAND operation is in progress, the NAND operation will fail. Signed-off-by: Scott Wood Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_elbc_nand.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index ddd37d2554ed..58db27855126 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -946,6 +946,13 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl) { struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + /* + * NAND transactions can tie up the bus for a long time, so set the + * bus timeout to max by clearing LBCR[BMT] (highest base counter + * value) and setting LBCR[BMTPS] to the highest prescaler value. + */ + clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15); + /* clear event registers */ setbits32(&lbc->ltesr, LTESR_NAND_MASK); out_be32(&lbc->lteatr, 0); -- 2.20.1