From b36ac1b43ebcd8b63cbfb35c54edb7bd577ad15b Mon Sep 17 00:00:00 2001 From: weijun yang Date: Sun, 15 Feb 2015 23:43:51 +0800 Subject: [PATCH] mmc: sirf: update sdhci_sirf_execute_tuning procedure For the original tuning code, delay value is set to SD Bus Clock Delay Register (SD_CLK_DELAY_SETTING) as (val | (Val << 7) | (val << 16)), which means CLK_DELAY_IN1, CLK_DELAY_IN2 and CLK_DELAY_OUT are the same and with 128 steps. This is doubtful. In CSR design specification documents CS-304575-DR-3H, this issue is clarified, the delay[13:0] in SD_CLK_DELAY_SETTING is simplied to the concatenation of {CLK_DELAY_IN2, CLK_DELAY_IN1}. Besides, for CMD19 tuning, no need to set CLK_DELAY_OUT([22,16] of SD_CLK_DELAY_SETTING). Signed-off-by: weijun yang Signed-off-by: Barry Song Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sirf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c index f6f82ec3618d..43314094699f 100644 --- a/drivers/mmc/host/sdhci-sirf.c +++ b/drivers/mmc/host/sdhci-sirf.c @@ -56,7 +56,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) int tuning_seq_cnt = 3; u8 phase, tuned_phases[SIRF_TUNING_COUNT]; u8 tuned_phase_cnt = 0; - int rc, longest_range = 0; + int rc = 0, longest_range = 0; int start = -1, end = 0, tuning_value = -1, range = 0; u16 clock_setting; struct mmc_host *mmc = host->mmc; @@ -68,7 +68,7 @@ retry: phase = 0; do { sdhci_writel(host, - clock_setting | phase | (phase << 7) | (phase << 16), + clock_setting | phase, SDHCI_CLK_DELAY_SETTING); if (!mmc_send_tuning(mmc)) { @@ -102,7 +102,7 @@ retry: */ phase = tuning_value; sdhci_writel(host, - clock_setting | phase | (phase << 7) | (phase << 16), + clock_setting | phase, SDHCI_CLK_DELAY_SETTING); dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", -- 2.20.1