From b2bbb20b37d734443d1c279d0033a64f6095db54 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 29 Jun 2006 12:25:39 -0700 Subject: [PATCH] USB: pxa2xx_udc understands GPIO based VBUS sensing This updates the PXA 25x UDC board-independent infrastructure for VBUS sensing and the D+ pullup. The original code evolved from rather bizarre support on Intel's "Lubbock" reference hardware, so that on more sensible hardware it doesn't work as well as it could/should. The change is just to teach the UDC driver how to use built-in PXA GPIO pins directly. This reduces the amount of board-specfic object code needed, and enables the use of a VBUS sensing IRQ on boards (like Gumstix) that have one. With VBUS sensing, the UDC is unclocked until a host is actually connected. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/corgi.c | 15 +------ drivers/usb/gadget/pxa2xx_udc.c | 70 ++++++++++++++++++++++++++++++++- drivers/usb/gadget/pxa2xx_udc.h | 24 ++++------- include/asm-arm/arch-pxa/udc.h | 8 ++++ 4 files changed, 85 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cce26576999e..337c01c4ac37 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -284,21 +284,9 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { /* * USB Device Controller */ -static void corgi_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { /* no connect GPIO; corgi can't tell connection status */ - .udc_command = corgi_udc_command, + .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; @@ -350,7 +338,6 @@ static void __init corgi_init(void) corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index fff027d30a09..f1adcf8b2023 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -150,6 +150,39 @@ MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); static void pxa2xx_ep_fifo_flush (struct usb_ep *ep); static void nuke (struct pxa2xx_ep *, int status); +/* one GPIO should be used to detect VBUS from the host */ +static int is_vbus_present(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_vbus) + return pxa_gpio_get(mach->gpio_vbus); + if (mach->udc_is_connected) + return mach->udc_is_connected(); + return 1; +} + +/* one GPIO should control a D+ pullup, so host sees this device (or not) */ +static void pullup_off(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 0); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); +} + +static void pullup_on(void) +{ + struct pxa2xx_udc_mach_info *mach = the_controller->mach; + + if (mach->gpio_pullup) + pxa_gpio_set(mach->gpio_pullup, 1); + else if (mach->udc_command) + mach->udc_command(PXA2XX_UDC_CMD_CONNECT); +} + static void pio_irq_enable(int bEndpointAddress) { bEndpointAddress &= 0xf; @@ -1721,6 +1754,16 @@ lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r) #endif +static irqreturn_t +udc_vbus_irq(int irq, void *_dev, struct pt_regs *r) +{ + struct pxa2xx_udc *dev = _dev; + int vbus = pxa_gpio_get(dev->mach->gpio_vbus); + + pxa2xx_udc_vbus_session(&dev->gadget, vbus); + return IRQ_HANDLED; +} + /*-------------------------------------------------------------------------*/ @@ -2438,7 +2481,7 @@ static struct pxa2xx_udc memory = { static int __init pxa2xx_udc_probe(struct platform_device *pdev) { struct pxa2xx_udc *dev = &memory; - int retval, out_dma = 1; + int retval, out_dma = 1, vbus_irq; u32 chiprev; /* insist on Intel/ARM/XScale */ @@ -2502,6 +2545,16 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) /* other non-static parts of init */ dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; + if (dev->mach->gpio_vbus) { + vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR); + pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR) + | GPIO_IN); + set_irq_type(vbus_irq, IRQT_BOTHEDGE); + } else + vbus_irq = 0; + if (dev->mach->gpio_pullup) + pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR) + | GPIO_OUT | GPIO_DFLT_LOW); init_timer(&dev->timer); dev->timer.function = udc_watchdog; @@ -2557,8 +2610,19 @@ lubbock_fail0: HEX_DISPLAY(dev->stats.irqs); LUB_DISC_BLNK_LED &= 0xff; #endif - } + } else #endif + if (vbus_irq) { + retval = request_irq(vbus_irq, udc_vbus_irq, + SA_INTERRUPT | SA_SAMPLE_RANDOM, + driver_name, dev); + if (retval != 0) { + printk(KERN_ERR "%s: can't get irq %i, err %d\n", + driver_name, vbus_irq, retval); + free_irq(IRQ_USB, dev); + return -EBUSY; + } + } create_proc_files(); return 0; @@ -2587,6 +2651,8 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) free_irq(LUBBOCK_USB_IRQ, dev); } #endif + if (dev->mach->gpio_vbus) + free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev); platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index 19a883f7d1b8..8e598c8bf4e3 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -177,27 +177,19 @@ struct pxa2xx_udc { static struct pxa2xx_udc *the_controller; -/* one GPIO should be used to detect VBUS from the host */ -static inline int is_vbus_present(void) +static inline int pxa_gpio_get(unsigned gpio) { - if (!the_controller->mach->udc_is_connected) - return 1; - return the_controller->mach->udc_is_connected(); + return (GPLR(gpio) & GPIO_bit(gpio)) != 0; } -/* one GPIO should control a D+ pullup, so host sees this device (or not) */ -static inline void pullup_off(void) +static inline void pxa_gpio_set(unsigned gpio, int is_on) { - if (!the_controller->mach->udc_command) - return; - the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); -} + int mask = GPIO_bit(gpio); -static inline void pullup_on(void) -{ - if (!the_controller->mach->udc_command) - return; - the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + if (is_on) + GPSR(gpio) = mask; + else + GPCR(gpio) = mask; } /*-------------------------------------------------------------------------*/ diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h index 30548a30c773..121cd241115d 100644 --- a/include/asm-arm/arch-pxa/udc.h +++ b/include/asm-arm/arch-pxa/udc.h @@ -12,6 +12,14 @@ struct pxa2xx_udc_mach_info { void (*udc_command)(int cmd); #define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ #define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. + */ + u16 gpio_vbus; /* high == vbus present */ + u16 gpio_pullup; /* high == pullup activated */ }; extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); -- 2.20.1