From b291c418172f2cfbe009d81cd9a92f7a2de7c579 Mon Sep 17 00:00:00 2001 From: Stefan Hauser Date: Fri, 1 Jul 2016 22:35:03 +0200 Subject: [PATCH] net: phy: dp83867: Fix initialization of PHYCR register When initializing the PHY control register, the FIFO depth bits are written without reading the previous register value, i.e. all other bits are overwritten with zero. This disables automatic MDI-X configuration, which is enabled by default. Fix initialization by doing a read/modify/write operation. Signed-off-by: Stefan Hauser Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/dp83867.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 2afa61b51d41..91177a4a32ad 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -57,6 +57,7 @@ /* PHY CTRL bits */ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 +#define DP83867_PHYCR_FIFO_DEPTH_MASK (3 << 14) /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 @@ -133,8 +134,8 @@ static int dp83867_of_init(struct phy_device *phydev) static int dp83867_config_init(struct phy_device *phydev) { struct dp83867_private *dp83867; - int ret; - u16 val, delay; + int ret, val; + u16 delay; if (!phydev->priv) { dp83867 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83867), @@ -151,8 +152,12 @@ static int dp83867_config_init(struct phy_device *phydev) } if (phy_interface_is_rgmii(phydev)) { - ret = phy_write(phydev, MII_DP83867_PHYCTRL, - (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); + val = phy_read(phydev, MII_DP83867_PHYCTRL); + if (val < 0) + return val; + val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK; + val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT); + ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; } -- 2.20.1