From b27899178c53226a5ff780a17657c84eb5e32338 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 18 Mar 2014 07:28:10 +0900 Subject: [PATCH] ARM: SAMSUNG: Move common save/restore helpers to separate file To separate legacy PM code from generic helpers, this patch moves the generic register save/restore helpers to a new file called pm-common.c that is compiled always when CONFIG_PM_SLEEP is enabled, to allow platforms that do not want to use the legacy PM code use the generic helpers. Signed-off-by: Tomasz Figa Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/Makefile | 1 + .../arm/plat-samsung/include/plat/pm-common.h | 26 +++++++ arch/arm/plat-samsung/include/plat/pm.h | 25 ------- arch/arm/plat-samsung/pm-common.c | 75 +++++++++++++++++++ arch/arm/plat-samsung/pm.c | 56 -------------- 5 files changed, 102 insertions(+), 81 deletions(-) create mode 100644 arch/arm/plat-samsung/pm-common.c diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index ba30a16b3ca8..25c826ed3b65 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support +obj-$(CONFIG_PM_SLEEP) += pm-common.o obj-$(CONFIG_SAMSUNG_PM) += pm.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h index f72974a762bf..741723eb8cd7 100644 --- a/arch/arm/plat-samsung/include/plat/pm-common.h +++ b/arch/arm/plat-samsung/include/plat/pm-common.h @@ -13,6 +13,32 @@ #ifndef __PLAT_SAMSUNG_PM_COMMON_H #define __PLAT_SAMSUNG_PM_COMMON_H __FILE__ +#include + +/* sleep save info */ + +/** + * struct sleep_save - save information for shared peripherals. + * @reg: Pointer to the register to save. + * @val: Holder for the value saved from reg. + * + * This describes a list of registers which is used by the pm core and + * other subsystem to save and restore register values over suspend. + */ +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +/* helper functions to save/restore lists of registers. */ + +extern void s3c_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count); + /* PM debug functions */ /** diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 2e04396eb3f3..4099e8d6f5f9 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -15,7 +15,6 @@ * management */ -#include #include struct device; @@ -59,30 +58,6 @@ extern unsigned long s3c_pm_flags; extern int s3c2410_cpu_suspend(unsigned long); -/* sleep save info */ - -/** - * struct sleep_save - save information for shared peripherals. - * @reg: Pointer to the register to save. - * @val: Holder for the value saved from reg. - * - * This describes a list of registers which is used by the pm core and - * other subsystem to save and restore register values over suspend. - */ -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -/* helper functions to save/restore lists of registers. */ - -extern void s3c_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count); -extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count); - #ifdef CONFIG_SAMSUNG_PM extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c new file mode 100644 index 000000000000..515cd53372bd --- /dev/null +++ b/arch/arm/plat-samsung/pm-common.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Tomasz Figa + * Copyright (C) 2008 Openmoko, Inc. + * Copyright (C) 2004-2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Samsung common power management helper functions. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include + +/* helper functions to save and restore register state */ + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * Note, we do not use S3C_PMDBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c_pm_do_restore(const struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + pr_debug("restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/** + * s3c_pm_do_restore_core() - early restore register values from save list. + * + * This is similar to s3c_pm_do_restore() except we try and minimise the + * side effects of the function in case registers that hardware might need + * to work has been restored. + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + __raw_writel(ptr->val, ptr->reg); +} diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 3d523c90202a..c08bc51201fc 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -66,62 +66,6 @@ int s3c_irqext_wake(struct irq_data *data, unsigned int state) return 0; } -/* helper functions to save and restore register state */ - -/** - * s3c_pm_do_save() - save a set of registers for restoration on resume. - * @ptr: Pointer to an array of registers. - * @count: Size of the ptr array. - * - * Run through the list of registers given, saving their contents in the - * array for later restoration when we wakeup. - */ -void s3c_pm_do_save(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} - -/** - * s3c_pm_do_restore() - restore register values from the save list. - * @ptr: Pointer to an array of registers. - * @count: Size of the ptr array. - * - * Restore the register values saved from s3c_pm_do_save(). - * - * Note, we do not use S3C_PMDBG() in here, as the system may not have - * restore the UARTs state yet -*/ - -void s3c_pm_do_restore(const struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} - -/** - * s3c_pm_do_restore_core() - early restore register values from save list. - * - * This is similar to s3c_pm_do_restore() except we try and minimise the - * side effects of the function in case registers that hardware might need - * to work has been restored. - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ - -void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) - __raw_writel(ptr->val, ptr->reg); -} - /* s3c2410_pm_show_resume_irqs * * print any IRQs asserted at resume time (ie, we woke from) -- 2.20.1