From b203e0dfe1a2b0ae5e2681e9285056e4ae8560af Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 6 May 2014 08:37:36 +0200 Subject: [PATCH] regulator: s2mps11: Fix accidental enable of buck6 ramp delay S2MPS11 supports enabling/disabling ramp delay only for buck[2346]. Other bucks have ramp delay enabled always. However the bit shift for enabling buck6 ramp delay in register is equal to 0. When ramp delay was set for the bucks unsupporting enable/disable (buck[15789] and buck10), the ramp delay for buck6 was also enabled. Fixes: b96244fad953 ("regulator: s2mps11: Don't check enable_shift before setting enable ramp rate") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/s2mps11.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 1583d4eaf911..02e2fb2fca66 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -205,11 +205,16 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) if (!ramp_enable) goto ramp_disable; - ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP, - 1 << enable_shift, 1 << enable_shift); - if (ret) { - dev_err(&rdev->dev, "failed to enable ramp rate\n"); - return ret; + /* Ramp delay can be enabled/disabled only for buck[2346] */ + if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 && + rdev_get_id(rdev) <= S2MPS11_BUCK4) || + rdev_get_id(rdev) == S2MPS11_BUCK6) { + ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } } ramp_val = get_ramp_delay(ramp_delay); -- 2.20.1