From b2025c7cc92d5bfc8c5ce756c8d8a6f57c776fbd Mon Sep 17 00:00:00 2001 From: "sean.wang@mediatek.com" Date: Tue, 16 Aug 2016 13:55:14 +0800 Subject: [PATCH] net: ethernet: mediatek: fix flow control settings on GMAC0 is not being enabled properly Commit 08ef55c6f257acf3bdc6940813f80e8f0f5d90ec ("net-next: mediatek: fix gigabit and flow control advertisement") had supported proper flow control settings for GMAC1. But for GMAC0, 1.GMAC0 shares the common logic with GMAC1 inside mtk_phy_link_adjust() to adapt various settings for the target phy. 2.GMAC0 uses fixed-phy to connect to a builtin gigabit switch with fixed link speed as commit 0c72c50f6f93b0c3daa9ea35d89ab3a933c7b5a0 ("net-next: mediatek: add fixed-phy support") describes. 3.However, fixed-phy doesn't enable SUPPORTED_Pause & SUPPORTED_Asym_Pause supported flag on default that would cause mtk_phy_link_adjust() not to enable flow control setting on GMAC0 properly and cause packet dropped when high traffic. Due to these reasons, the patch adds SUPPORTED_Pause & SUPPORTED_Asym_Pause supported flags on fixed-phy used by the driver to have proper handling on the both GMAC with the shared common logic. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index bd0ea056405f..9901527a39df 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -267,6 +267,11 @@ static int mtk_phy_connect(struct mtk_mac *mac) mac->phy_dev->autoneg = AUTONEG_ENABLE; mac->phy_dev->speed = 0; mac->phy_dev->duplex = 0; + + if (of_phy_is_fixed_link(mac->of_node)) + mac->phy_dev->supported |= + SUPPORTED_Pause | SUPPORTED_Asym_Pause; + mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause; mac->phy_dev->advertising = mac->phy_dev->supported | -- 2.20.1