From b12befecd7de905a05053eb6a266e3b97528c6d4 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 27 Mar 2017 15:15:06 +0530 Subject: [PATCH] dt-bindings: PCI: Add DT bindings for PCI designware EP mode Add device tree binding documentation for PCI designware EP mode. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- .../bindings/pci/designware-pcie.txt | 26 +++++++++++++------ 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 1392c705ceca..b2480dd38c11 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -6,30 +6,40 @@ Required properties: - reg-names: Must be "config" for the PCIe configuration space. (The old way of getting the configuration address space from "ranges" is deprecated and should be avoided.) +- num-lanes: number of lanes to use +RC mode: - #address-cells: set to <3> - #size-cells: set to <2> - device_type: set to "pci" - ranges: ranges for the PCI memory and I/O regions - #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt +- interrupt-map-mask and interrupt-map: standard PCI + properties to define the mapping of the PCIe interface to interrupt numbers. -- num-lanes: number of lanes to use +EP mode: +- num-ib-windows: number of inbound address translation + windows +- num-ob-windows: number of outbound address translation + windows Optional properties: -- num-viewport: number of view ports configured in hardware. If a platform - does not specify it, the driver assumes 2. - num-lanes: number of lanes to use (this property should be specified unless the link is brought already up in BIOS) - reset-gpio: gpio pin number of power good signal -- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to - specify this property, to keep backwards compatibility a range of 0x00-0xff - is assumed if not present) - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - "pcie" - "pcie_bus" +RC mode: +- num-viewport: number of view ports configured in + hardware. If a platform does not specify it, the driver assumes 2. +- bus-range: PCI bus numbers covered (it is recommended + for new devicetrees to specify this property, to keep backwards + compatibility a range of 0x00-0xff is assumed if not present) +EP mode: +- max-functions: maximum number of functions that can be + configured Example configuration: -- 2.20.1