From afc3b79f5dbddd4ab210beb9cc6da102a1032b89 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 9 Sep 2013 14:53:02 +0200 Subject: [PATCH] ARM: iop32x: read N2100 power key using gpiolib Refrain from using the custom gpio_line_get() to read the power key on the N2100, use the gpiolib function gpio_get() instead. Also request the line in the GPIOs initicall, and move the poll timer setup to that inicall so the gpio chip is available before we request this GPIO and start to poll it. Cc: Lennert Buytenhek Cc: Dan Williams Cc: Mikael Pettersson Tested-by: Aaro Koskinen Signed-off-by: Linus Walleij --- arch/arm/mach-iop32x/n2100.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 6bace5bc7ebb..bc40a97050a1 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -306,7 +306,7 @@ static struct timer_list power_button_poll_timer; static void power_button_poll(unsigned long dummy) { - if (gpio_line_get(N2100_POWER_BUTTON) == 0) { + if (gpio_get_value(N2100_POWER_BUTTON) == 0) { ctrl_alt_del(); return; } @@ -325,6 +325,20 @@ static int __init n2100_request_gpios(void) ret = gpio_request(N2100_HARDWARE_RESET, "reset"); if (ret) pr_err("could not request reset GPIO\n"); + + ret = gpio_request(N2100_POWER_BUTTON, "power"); + if (ret) + pr_err("could not request power GPIO\n"); + else { + ret = gpio_direction_input(N2100_POWER_BUTTON); + if (ret) + pr_err("could not set power GPIO as input\n"); + } + /* Set up power button poll timer */ + init_timer(&power_button_poll_timer); + power_button_poll_timer.function = power_button_poll; + power_button_poll_timer.expires = jiffies + (HZ / 10); + add_timer(&power_button_poll_timer); return 0; } device_initcall(n2100_request_gpios); @@ -341,11 +355,6 @@ static void __init n2100_init_machine(void) ARRAY_SIZE(n2100_i2c_devices)); pm_power_off = n2100_power_off; - - init_timer(&power_button_poll_timer); - power_button_poll_timer.function = power_button_poll; - power_button_poll_timer.expires = jiffies + (HZ / 10); - add_timer(&power_button_poll_timer); } MACHINE_START(N2100, "Thecus N2100") -- 2.20.1