From af6061777131639d7d2687ce542b6052a6510c25 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 29 Mar 2013 10:03:26 +0100 Subject: [PATCH] pinctrl: select_state: don't call pinctrl_free_setting on error As Stephen Warren pointed out, pinctrl_free_setting() was called instead of pinmux_disable_setting() on error. In this error code, we want to call pinmux_disable_setting() where pinmux_enable_setting() was called. And when pinconf_apply_setting() was called, we can't do much to undo the pin muxing (the closest thing I can think about for "unmuxing" a pin is muxing it as GPIO input). Signed-off-by: Richard Genoud Reviewed-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 96cee791aa82..deb3d04323b0 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -970,7 +970,15 @@ unapply_new_state: list_for_each_entry(setting2, &state->settings, node) { if (&setting2->node == &setting->node) break; - pinctrl_free_setting(true, setting2); + /* + * All we can do here is pinmux_disable_setting. + * That means that some pins are muxed differently now + * than they were before applying the setting (We can't + * "unmux a pin"!), but it's not a big deal since the pins + * are free to be muxed by another apply_setting. + */ + if (setting2->type == PIN_MAP_TYPE_MUX_GROUP) + pinmux_disable_setting(setting2); } if (old_state) { -- 2.20.1