From ae9c25a1826ca9602e89fe9c11700c63ce16d077 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 27 Apr 2014 16:37:39 +0200 Subject: [PATCH] ath9k_hw: do not lower ANI setting below default on AR913x When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 6d47783f2e5b..ba502a2d199b 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -155,6 +155,9 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL) + immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; + if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -235,6 +238,9 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel, BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL) + immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; + if (ah->opmode == NL80211_IFTYPE_STATION && BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) -- 2.20.1