From ae552ab02cd556f53047959f15a5f870ab7c5ebe Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 30 Oct 2014 12:00:41 +0800 Subject: [PATCH] mmc: atmel-mci: add runtime pm support Add runtime pm support to atmel mci controller. Use runtime pm APIs to enable/disable atmel mci's clock. Use runtime autosuspend APIs to enable auto suspend delay. Signed-off-by: Wenyou Yang Acked-by: Ludovic Desroches Signed-off-by: Ulf Hansson [Ulf: Fixed compile error] --- drivers/mmc/host/atmel-mci.c | 90 +++++++++++++++++++++++++++--------- 1 file changed, 67 insertions(+), 23 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index d9646e5ae2c8..4df1599583f8 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -37,6 +37,8 @@ #include #include +#include +#include #include #include @@ -44,6 +46,8 @@ #include "atmel-mci-regs.h" +#define AUTOSUSPEND_DELAY 50 + #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) #define ATMCI_DMA_THRESHOLD 16 @@ -386,20 +390,19 @@ static int atmci_regs_show(struct seq_file *s, void *v) if (!buf) return -ENOMEM; + pm_runtime_get_sync(&host->pdev->dev); + /* * Grab a more or less consistent snapshot. Note that we're * not disabling interrupts, so IMR and SR may not be * consistent. */ - ret = clk_prepare_enable(host->mck); - if (ret) - goto out; - spin_lock_bh(&host->lock); memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE); spin_unlock_bh(&host->lock); - clk_disable_unprepare(host->mck); + pm_runtime_mark_last_busy(&host->pdev->dev); + pm_runtime_put_autosuspend(&host->pdev->dev); seq_printf(s, "MR:\t0x%08x%s%s ", buf[ATMCI_MR / 4], @@ -449,7 +452,6 @@ static int atmci_regs_show(struct seq_file *s, void *v) val & ATMCI_CFG_LSYNC ? " LSYNC" : ""); } -out: kfree(buf); return ret; @@ -1255,6 +1257,8 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) WARN_ON(slot->mrq); dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode); + pm_runtime_get_sync(&host->pdev->dev); + /* * We may "know" the card is gone even though there's still an * electrical connection. If so, we really need to communicate @@ -1284,7 +1288,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct atmel_mci_slot *slot = mmc_priv(mmc); struct atmel_mci *host = slot->host; unsigned int i; - bool unprepare_clk; + + pm_runtime_get_sync(&host->pdev->dev); slot->sdc_reg &= ~ATMCI_SDCBUS_MASK; switch (ios->bus_width) { @@ -1300,13 +1305,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) unsigned int clock_min = ~0U; u32 clkdiv; - clk_prepare(host->mck); - unprepare_clk = true; - spin_lock_bh(&host->lock); if (!host->mode_reg) { - clk_enable(host->mck); - unprepare_clk = false; atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); if (host->caps.has_cfg_reg) @@ -1374,8 +1374,6 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } else { bool any_slot_active = false; - unprepare_clk = false; - spin_lock_bh(&host->lock); slot->clock = 0; for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { @@ -1388,17 +1386,12 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); if (host->mode_reg) { atmci_readl(host, ATMCI_MR); - clk_disable(host->mck); - unprepare_clk = true; } host->mode_reg = 0; } spin_unlock_bh(&host->lock); } - if (unprepare_clk) - clk_unprepare(host->mck); - switch (ios->power_mode) { case MMC_POWER_OFF: if (!IS_ERR(mmc->supply.vmmc)) @@ -1424,6 +1417,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) */ break; } + + pm_runtime_mark_last_busy(&host->pdev->dev); + pm_runtime_put_autosuspend(&host->pdev->dev); } static int atmci_get_ro(struct mmc_host *mmc) @@ -1515,6 +1511,9 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) spin_unlock(&host->lock); mmc_request_done(prev_mmc, mrq); spin_lock(&host->lock); + + pm_runtime_mark_last_busy(&host->pdev->dev); + pm_runtime_put_autosuspend(&host->pdev->dev); } static void atmci_command_complete(struct atmel_mci *host, @@ -2424,15 +2423,16 @@ static int __init atmci_probe(struct platform_device *pdev) atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); host->bus_hz = clk_get_rate(host->mck); - clk_disable_unprepare(host->mck); host->mapbase = regs->start; tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host); - if (ret) + if (ret) { + clk_disable_unprepare(host->mck); return ret; + } /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); @@ -2456,6 +2456,12 @@ static int __init atmci_probe(struct platform_device *pdev) setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); + /* We need at least one slot to succeed */ nr_slots = 0; ret = -ENODEV; @@ -2498,6 +2504,9 @@ static int __init atmci_probe(struct platform_device *pdev) "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); + pm_runtime_mark_last_busy(&host->pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + return 0; err_dma_alloc: @@ -2506,6 +2515,11 @@ err_dma_alloc: atmci_cleanup_slot(host->slot[i], i); } err_init_slot: + clk_disable_unprepare(host->mck); + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + del_timer_sync(&host->timer); if (host->dma.chan) dma_release_channel(host->dma.chan); @@ -2518,6 +2532,8 @@ static int __exit atmci_remove(struct platform_device *pdev) struct atmel_mci *host = platform_get_drvdata(pdev); unsigned int i; + pm_runtime_get_sync(&pdev->dev); + if (host->buffer) dma_free_coherent(&pdev->dev, host->buf_size, host->buffer, host->buf_phys_addr); @@ -2527,11 +2543,9 @@ static int __exit atmci_remove(struct platform_device *pdev) atmci_cleanup_slot(host->slot[i], i); } - clk_prepare_enable(host->mck); atmci_writel(host, ATMCI_IDR, ~0UL); atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); atmci_readl(host, ATMCI_SR); - clk_disable_unprepare(host->mck); del_timer_sync(&host->timer); if (host->dma.chan) @@ -2539,14 +2553,44 @@ static int __exit atmci_remove(struct platform_device *pdev) free_irq(platform_get_irq(pdev, 0), host); + clk_disable_unprepare(host->mck); + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int atmci_runtime_suspend(struct device *dev) +{ + struct atmel_mci *host = dev_get_drvdata(dev); + + clk_disable_unprepare(host->mck); + return 0; } +static int atmci_runtime_resume(struct device *dev) +{ + struct atmel_mci *host = dev_get_drvdata(dev); + + return clk_prepare_enable(host->mck); +} +#endif + +static const struct dev_pm_ops atmci_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_PM_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL) +}; + static struct platform_driver atmci_driver = { .remove = __exit_p(atmci_remove), .driver = { .name = "atmel_mci", .of_match_table = of_match_ptr(atmci_dt_ids), + .pm = &atmci_dev_pm_ops, }, }; -- 2.20.1