From ad548430ab690504b3e43e8cba706980279c1f38 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Mon, 22 Jun 2015 14:33:44 +0530 Subject: [PATCH] ARM: dts: DRA72: switch to cpsw slave0 for ethernet On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to select cpsw slave0. Signed-off-by: Vignesh R Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4e1b60581782..2314e3f6267a 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -343,6 +343,12 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + + cpsw_sel_s0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + }; }; }; @@ -571,9 +577,10 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; }; -&cpsw_emac1 { +&cpsw_emac0 { phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; @@ -582,7 +589,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - active_slave = <1>; }; &dcan1 { -- 2.20.1