From aca5dae8341bc0d340461bdb99749039266a0d81 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 7 Dec 2012 03:01:16 +0000 Subject: [PATCH] igb: Add support functions to access thermal data. Some of our devices have internal sensors for reporting thermal data. This patch creates the interface to the sensors for exporting via sysfs. Subsequent patch will actually export the data. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.h | 9 ++++++++- drivers/net/ethernet/intel/igb/e1000_defines.h | 12 ++++++++++++ drivers/net/ethernet/intel/igb/e1000_hw.h | 14 ++++++++++++++ drivers/net/ethernet/intel/igb/e1000_regs.h | 8 ++++++++ 4 files changed, 42 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index 67bd9f93c3cc..caf6abf9abef 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -266,5 +266,12 @@ u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); #define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 - +#define E1000_EMC_INTERNAL_DATA 0x00 +#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 +#define E1000_EMC_DIODE1_DATA 0x01 +#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 +#define E1000_EMC_DIODE2_DATA 0x23 +#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A +#define E1000_EMC_DIODE3_DATA 0x2A +#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 446678ec9fe6..9b7ef93efd79 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -675,6 +675,18 @@ #define NVM_COMB_VER_SHFT 8 #define NVM_VER_INVALID 0xFFFF #define NVM_ETRACK_SHIFT 16 +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF #define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ #define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 75312ba10d56..837a274b7461 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -356,6 +356,19 @@ struct e1000_nvm_operations { s32 (*valid_led_default)(struct e1000_hw *, u16 *); }; +#define E1000_MAX_SENSORS 3 + +struct e1000_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct e1000_thermal_sensor_data { + struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; +}; + struct e1000_info { s32 (*get_invariants)(struct e1000_hw *); struct e1000_mac_operations *mac_ops; @@ -401,6 +414,7 @@ struct e1000_mac_info { bool report_tx_early; bool serdes_has_link; bool tx_pkt_filtering; + struct e1000_thermal_sensor_data thermal_sensor_data; }; struct e1000_phy_info { diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h index 31c3e2f4f58c..889de261844d 100644 --- a/drivers/net/ethernet/intel/igb/e1000_regs.h +++ b/drivers/net/ethernet/intel/igb/e1000_regs.h @@ -132,6 +132,14 @@ /* Split and Replication RX Control - RW */ #define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ + +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + /* * Convenience macros * -- 2.20.1