From ab9aad57f1fdfaefce1b34b69e069be51d5aa42b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 22:27:40 +0800 Subject: [PATCH] ARM: mxs: remove board files MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Since DT kernel provides the equivalent support with those board files, we can remove them now. Signed-off-by: Shawn Guo Cc: Lothar Waßmann Cc: Marek Vasut Cc: Lauri Hintsala --- arch/arm/configs/mxs_defconfig | 6 - arch/arm/mach-mxs/Kconfig | 87 ----- arch/arm/mach-mxs/Makefile | 7 - arch/arm/mach-mxs/mach-apx4devkit.c | 273 -------------- arch/arm/mach-mxs/mach-m28evk.c | 366 ------------------- arch/arm/mach-mxs/mach-mx23evk.c | 190 ---------- arch/arm/mach-mxs/mach-mx28evk.c | 477 ------------------------- arch/arm/mach-mxs/mach-stmp378x_devb.c | 123 ------- arch/arm/mach-mxs/mach-tx28.c | 184 ---------- arch/arm/mach-mxs/module-tx28.c | 160 --------- arch/arm/mach-mxs/module-tx28.h | 10 - 11 files changed, 1883 deletions(-) delete mode 100644 arch/arm/mach-mxs/mach-apx4devkit.c delete mode 100644 arch/arm/mach-mxs/mach-m28evk.c delete mode 100644 arch/arm/mach-mxs/mach-mx23evk.c delete mode 100644 arch/arm/mach-mxs/mach-mx28evk.c delete mode 100644 arch/arm/mach-mxs/mach-stmp378x_devb.c delete mode 100644 arch/arm/mach-mxs/mach-tx28.c delete mode 100644 arch/arm/mach-mxs/module-tx28.c delete mode 100644 arch/arm/mach-mxs/module-tx28.h diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 4edcfb4e4dee..36d60dda310c 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y CONFIG_MACH_MXS_DT=y -CONFIG_MACH_MX23EVK=y -CONFIG_MACH_MX28EVK=y -CONFIG_MACH_STMP378X_DEVB=y -CONFIG_MACH_TX28=y -CONFIG_MACH_M28EVK=y -CONFIG_MACH_APX4DEVKIT=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 9a8bbda195b2..2e6cb6d8604f 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -27,91 +27,4 @@ config MACH_MXS_DT Include support for Freescale MXS platforms(i.MX23 and i.MX28) using the device tree for discovery -config MACH_STMP378X_DEVB - bool "Support STMP378x_devb Platform" - select SOC_IMX23 - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for STMP378x-devb platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX23EVK - bool "Support MX23EVK Platform" - select SOC_IMX23 - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for MX23EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX28EVK - bool "Support MX28EVK Platform" - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_FLEXCAN - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for MX28EVK platform. This includes specific - configurations for the board and its peripherals. - -config MODULE_TX28 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXS_PWM - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - -config MODULE_M28 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_FLEXCAN - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - -config MODULE_APX4 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXS_SAIF - -config MACH_TX28 - bool "Ka-Ro TX28 module" - select MODULE_TX28 - -config MACH_M28EVK - bool "Support DENX M28EVK Platform" - select MODULE_M28 - -config MACH_APX4DEVKIT - bool "Support Bluegiga APX4 Development Kit" - select MODULE_APX4 - endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index fed3695a1339..a7ace243cfcc 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -4,12 +4,5 @@ obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o -obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o -obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o -obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o -obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o -obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o -obj-$(CONFIG_MODULE_TX28) += module-tx28.o -obj-$(CONFIG_MACH_TX28) += mach-tx28.o obj-y += devices/ diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c deleted file mode 100644 index f5f061757deb..000000000000 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright (C) 2011-2012 - * Lauri Hintsala, Bluegiga, - * Veli-Pekka Peltola, Bluegiga, - * - * based on: mach-mx28evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-mx28.h" - -#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) - -static const iomux_cfg_t apx4devkit_pads[] __initconst = { - /* duart */ - MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, - - /* auart1 */ - MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, - MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, - - /* auart2 */ - MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, - - /* auart3 */ - MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - - /* i2c */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, - - /* saif0 & saif1 */ - MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), -}; - -/* led */ -static const struct gpio_led apx4devkit_leds[] __initconst = { - { - .name = "user-led", - .default_trigger = "heartbeat", - .gpio = APX4DEVKIT_GPIO_USERLED, - }, -}; - -static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { - .leds = apx4devkit_leds, - .num_leds = ARRAY_SIZE(apx4devkit_leds), -}; - -static const struct fec_platform_data mx28_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - -static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { - { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ - { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ - defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("VDDA", "0-000a"), - REGULATOR_SUPPLY("VDDIO", "0-000a"), -}; - -static struct regulator_init_data apx4devkit_vdd_reg_init_data = { - .constraints = { - .name = "3V3", - .always_on = 1, - }, - .consumer_supplies = apx4devkit_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), -}; - -static struct fixed_voltage_config apx4devkit_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &apx4devkit_vdd_reg_init_data, -}; - -static struct platform_device apx4devkit_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &apx4devkit_vdd_pdata, - }, -}; - -static void __init apx4devkit_add_regulators(void) -{ - platform_device_register(&apx4devkit_voltage_regulator); -} -#else -static void __init apx4devkit_add_regulators(void) {} -#endif - -static const struct mxs_saif_platform_data - apx4devkit_mxs_saif_pdata[] __initconst = { - /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ - { - .master_mode = 1, - .master_id = 0, - }, { - .master_mode = 0, - .master_id = 0, - }, -}; - -static int apx4devkit_phy_fixup(struct phy_device *phy) -{ - phy->dev_flags |= MICREL_PHY_50MHZ_CLK; - return 0; -} - -static void __init apx4devkit_fec_phy_clk_enable(void) -{ - struct clk *clk; - - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - -static void __init apx4devkit_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(apx4devkit_pads, - ARRAY_SIZE(apx4devkit_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart1(); - mx28_add_auart2(); - mx28_add_auart3(); - - /* - * Register fixup for the Micrel KS8031 PHY clock - * (shares same ID with KS8051) - */ - phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, - apx4devkit_phy_fixup); - - apx4devkit_fec_phy_clk_enable(); - mx28_add_fec(0, &mx28_fec_pdata); - - mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); - - gpio_led_register_device(0, &apx4devkit_led_data); - - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); - mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); - mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); - - apx4devkit_add_regulators(); - - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, apx4devkit_i2c_boardinfo, - ARRAY_SIZE(apx4devkit_i2c_boardinfo)); - - mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); -} - -static void __init apx4devkit_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer apx4devkit_timer = { - .init = apx4devkit_timer_init, -}; - -MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &apx4devkit_timer, - .init_machine = apx4devkit_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c deleted file mode 100644 index 4c00c879b893..000000000000 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, - * - * based on: mach-mx28_evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx28.h" - -#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16) -#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17) - -#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) -#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28) - -#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) -#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) - -static const iomux_cfg_t m28evk_pads[] __initconst = { - /* duart */ - MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - - /* auart3 */ - MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, - MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, - - /* flexcan0 */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - - /* flexcan1 */ - MX28_PAD_GPMI_CE2N__CAN1_TX, - MX28_PAD_GPMI_CE3N__CAN1_RX, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* mxsfb (lcdif) */ - MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, - MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, - MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, - MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, - MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, - MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, - MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, - MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, - MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, - MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, - MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, - MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, - MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, - MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, - MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, - MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, - - MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL, - - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* mmc1 */ - MX28_PAD_GPMI_D00__SSP1_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D01__SSP1_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D02__SSP1_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D03__SSP1_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D04__SSP1_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D05__SSP1_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D06__SSP1_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D07__SSP1_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY1__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_WRN__SSP1_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_GPMI_RESETN__GPIO_0_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM4__GPIO_3_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL, - MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL, - - /* nand */ - MX28_PAD_GPMI_D00__GPMI_D0 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D01__GPMI_D1 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D02__GPMI_D2 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D03__GPMI_D3 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D04__GPMI_D4 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D05__GPMI_D5 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D06__GPMI_D6 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D07__GPMI_D7 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_CE0N__GPMI_CE0N | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_RDY0__GPMI_READY0 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_RDN__GPMI_RDN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_WRN__GPMI_WRN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_ALE__GPMI_ALE | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_CLE__GPMI_CLE | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RESETN__GPMI_RESETN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - - /* Backlight */ - MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, -}; - -/* led */ -static const struct gpio_led m28evk_leds[] __initconst = { - { - .name = "user-led1", - .default_trigger = "heartbeat", - .gpio = M28EVK_GPIO_USERLED1, - }, - { - .name = "user-led2", - .default_trigger = "heartbeat", - .gpio = M28EVK_GPIO_USERLED2, - }, -}; - -static const struct gpio_led_platform_data m28evk_led_data __initconst = { - .leds = m28evk_leds, - .num_leds = ARRAY_SIZE(m28evk_leds), -}; - -static struct fec_platform_data mx28_fec_pdata[] __initdata = { - { - /* fec0 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, { - /* fec1 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, -}; - -static int __init m28evk_fec_get_mac(void) -{ - int i; - u32 val; - const u32 *ocotp = mxs_get_ocotp(); - - if (!ocotp) - return -ETIMEDOUT; - - /* - * OCOTP only stores the last 4 octets for each mac address, - * so hard-code DENX OUI (C0:E5:4E) here. - */ - for (i = 0; i < 2; i++) { - val = ocotp[i]; - mx28_fec_pdata[i].mac[0] = 0xC0; - mx28_fec_pdata[i].mac[1] = 0xE5; - mx28_fec_pdata[i].mac[2] = 0x4E; - mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; - mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; - mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; - } - - return 0; -} - -/* mxsfb (lcdif) */ -static struct fb_videomode m28evk_video_modes[] = { - { - .name = "Ampire AM-800480R2TMQW-T01H", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30066, /* picosecond (33.26 MHz) */ - .left_margin = 0, - .right_margin = 256, - .upper_margin = 0, - .lower_margin = 45, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, - }, -}; - -static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = { - .mode_list = m28evk_video_modes, - .mode_count = ARRAY_SIZE(m28evk_video_modes), - .default_bpp = 16, - .ld_intf_width = STMLCDIF_18BIT, -}; - -static struct at24_platform_data m28evk_eeprom = { - .byte_len = 16384, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = { - { - I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */ - .platform_data = &m28evk_eeprom, - }, -}; - -static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = { - { - /* mmc0 */ - .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, { - /* mmc1 */ - .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, -}; - -static void __init m28evk_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart3(); - - if (!m28evk_fec_get_mac()) { - mx28_add_fec(0, &mx28_fec_pdata[0]); - mx28_add_fec(1, &mx28_fec_pdata[1]); - } - - mx28_add_flexcan(0, NULL); - mx28_add_flexcan(1, NULL); - - mx28_add_mxsfb(&m28evk_mxsfb_pdata); - - mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]); - mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]); - - gpio_led_register_device(0, &m28evk_led_data); - - /* I2C */ - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo, - ARRAY_SIZE(m28_stk5v3_i2c_boardinfo)); -} - -static void __init m28evk_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer m28evk_timer = { - .init = m28evk_timer_init, -}; - -MACHINE_START(M28EVK, "DENX M28 EVK") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &m28evk_timer, - .init_machine = m28evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c deleted file mode 100644 index e7272a41939d..000000000000 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx23.h" - -#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) -#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) -#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) -#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) - -static const iomux_cfg_t mx23evk_pads[] __initconst = { - /* duart */ - MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart */ - MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, - MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, - MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL, - MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL, - - /* mxsfb (lcdif) */ - MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL, - MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL, - MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL, - MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL, - MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL, - MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL, - MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL, - MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL, - MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL, - MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL, - MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL, - MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL, - MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL, - MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL, - MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, - /* LCD panel enable */ - MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, - /* backlight control */ - MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, - - /* mmc */ - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D08__SSP1_DATA4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D09__SSP1_DATA5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D10__SSP1_DATA6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D11__SSP1_DATA7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_CMD__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DETECT__SSP1_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_SSP1_SCK__SSP1_SCK | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX23_PAD_PWM4__GPIO_1_30 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX23_PAD_PWM3__GPIO_1_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), -}; - -/* mxsfb (lcdif) */ -static struct fb_videomode mx23evk_video_modes[] = { - { - .name = "Samsung-LMS430HF02", - .refresh = 60, - .xres = 480, - .yres = 272, - .pixclock = 108096, /* picosecond (9.2 MHz) */ - .left_margin = 15, - .right_margin = 8, - .upper_margin = 12, - .lower_margin = 4, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; - -static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { - .mode_list = mx23evk_video_modes, - .mode_count = ARRAY_SIZE(mx23evk_video_modes), - .default_bpp = 32, - .ld_intf_width = STMLCDIF_24BIT, -}; - -static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = { - .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, -}; - -static void __init mx23evk_init(void) -{ - int ret; - - mx23_soc_init(); - - mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); - - mx23_add_duart(); - mx23_add_auart0(); - - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata); - - ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); - if (ret) - pr_warn("failed to request gpio lcd-enable: %d\n", ret); - else - gpio_set_value(MX23EVK_LCD_ENABLE, 1); - - ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); - if (ret) - pr_warn("failed to request gpio bl-enable: %d\n", ret); - else - gpio_set_value(MX23EVK_BL_ENABLE, 1); - - mx23_add_mxsfb(&mx23evk_mxsfb_pdata); - mx23_add_rtc_stmp3xxx(); -} - -static void __init mx23evk_timer_init(void) -{ - mx23_clocks_init(); -} - -static struct sys_timer mx23evk_timer = { - .init = mx23evk_timer_init, -}; - -MACHINE_START(MX23EVK, "Freescale MX23 EVK") - /* Maintainer: Freescale Semiconductor, Inc. */ - .map_io = mx23_map_io, - .init_irq = mx23_init_irq, - .timer = &mx23evk_timer, - .init_machine = mx23evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c deleted file mode 100644 index dafd48e86c8c..000000000000 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-mx28.h" - -#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) -#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) -#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) -#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) -#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) -#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) - -#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) -#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) -#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) -#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29) - -static const iomux_cfg_t mx28evk_pads[] __initconst = { - /* duart */ - MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, - /* auart3 */ - MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, - MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, - /* phy power line */ - MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL, - /* phy reset line */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL, - - /* flexcan0 */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - /* flexcan1 */ - MX28_PAD_GPMI_CE2N__CAN1_TX, - MX28_PAD_GPMI_CE3N__CAN1_RX, - /* transceiver power control */ - MX28_PAD_SSP1_CMD__GPIO_2_13, - - /* mxsfb (lcdif) */ - MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, - MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, - MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, - MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, - MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, - MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, - MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, - MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, - MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, - MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, - MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, - MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, - MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, - MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, - MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, - MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, - MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL, - MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL, - MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL, - MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL, - /* LCD panel enable */ - MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, - /* backlight control */ - MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_SSP1_SCK__GPIO_2_12 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM3__GPIO_3_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* mmc1 */ - MX28_PAD_GPMI_D00__SSP1_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D01__SSP1_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D02__SSP1_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D03__SSP1_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D04__SSP1_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D05__SSP1_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D06__SSP1_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D07__SSP1_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY1__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_WRN__SSP1_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_GPMI_RESETN__GPIO_0_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM4__GPIO_3_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_I2C0_SDA__I2C0_SDA | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - - /* saif0 & saif1 */ - MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), -}; - -/* led */ -static const struct gpio_led mx28evk_leds[] __initconst = { - { - .name = "GPIO-LED", - .default_trigger = "heartbeat", - .gpio = MX28EVK_GPIO_LED, - }, -}; - -static const struct gpio_led_platform_data mx28evk_led_data __initconst = { - .leds = mx28evk_leds, - .num_leds = ARRAY_SIZE(mx28evk_leds), -}; - -/* fec */ -static void __init mx28evk_fec_reset(void) -{ - struct clk *clk; - - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); - mdelay(1); - gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); -} - -static struct fec_platform_data mx28_fec_pdata[] __initdata = { - { - /* fec0 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, { - /* fec1 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, -}; - -static int __init mx28evk_fec_get_mac(void) -{ - int i; - u32 val; - const u32 *ocotp = mxs_get_ocotp(); - - if (!ocotp) - return -ETIMEDOUT; - - /* - * OCOTP only stores the last 4 octets for each mac address, - * so hard-code Freescale OUI (00:04:9f) here. - */ - for (i = 0; i < 2; i++) { - val = ocotp[i]; - mx28_fec_pdata[i].mac[0] = 0x00; - mx28_fec_pdata[i].mac[1] = 0x04; - mx28_fec_pdata[i].mac[2] = 0x9f; - mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; - mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; - mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; - } - - return 0; -} - -/* - * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers - */ -static int flexcan0_en, flexcan1_en; - -static void mx28evk_flexcan_switch(void) -{ - if (flexcan0_en || flexcan1_en) - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); - else - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); -} - -static void mx28evk_flexcan0_switch(int enable) -{ - flexcan0_en = enable; - mx28evk_flexcan_switch(); -} - -static void mx28evk_flexcan1_switch(int enable) -{ - flexcan1_en = enable; - mx28evk_flexcan_switch(); -} - -static const struct flexcan_platform_data - mx28evk_flexcan_pdata[] __initconst = { - { - .transceiver_switch = mx28evk_flexcan0_switch, - }, { - .transceiver_switch = mx28evk_flexcan1_switch, - } -}; - -/* mxsfb (lcdif) */ -static struct fb_videomode mx28evk_video_modes[] = { - { - .name = "Seiko-43WVF1G", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29851, /* picosecond (33.5 MHz) */ - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; - -static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { - .mode_list = mx28evk_video_modes, - .mode_count = ARRAY_SIZE(mx28evk_video_modes), - .default_bpp = 32, - .ld_intf_width = STMLCDIF_24BIT, -}; - -static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { - { - /* mmc0 */ - .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, { - /* mmc1 */ - .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, -}; - -static struct i2c_board_info mxs_i2c0_board_info[] __initdata = { - { - I2C_BOARD_INFO("sgtl5000", 0x0a), - }, -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("VDDA", "0-000a"), - REGULATOR_SUPPLY("VDDIO", "0-000a"), -}; - -static struct regulator_init_data mx28evk_vdd_reg_init_data = { - .constraints = { - .name = "3V3", - .always_on = 1, - }, - .consumer_supplies = mx28evk_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies), -}; - -static struct fixed_voltage_config mx28evk_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &mx28evk_vdd_reg_init_data, -}; -static struct platform_device mx28evk_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &mx28evk_vdd_pdata, - }, -}; -static void __init mx28evk_add_regulators(void) -{ - platform_device_register(&mx28evk_voltage_regulator); -} -#else -static void __init mx28evk_add_regulators(void) {} -#endif - -static const struct gpio mx28evk_gpios[] __initconst = { - { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, - { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, - { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, - { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, - { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, - { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, - { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, -}; - -static const struct mxs_saif_platform_data - mx28evk_mxs_saif_pdata[] __initconst = { - /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ - { - .master_mode = 1, - .master_id = 0, - }, { - .master_mode = 0, - .master_id = 0, - }, -}; - -static void __init mx28evk_init(void) -{ - int ret; - - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart3(); - - if (mx28evk_fec_get_mac()) - pr_warn("%s: failed on fec mac setup\n", __func__); - - ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); - if (ret) - pr_err("One or more GPIOs failed to be requested: %d\n", ret); - - mx28evk_fec_reset(); - mx28_add_fec(0, &mx28_fec_pdata[0]); - mx28_add_fec(1, &mx28_fec_pdata[1]); - - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); - - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); - mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); - mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]); - - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, mxs_i2c0_board_info, - ARRAY_SIZE(mxs_i2c0_board_info)); - - mx28evk_add_regulators(); - - mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, - NULL, 0); - - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - - mx28_add_rtc_stmp3xxx(); - - gpio_led_register_device(0, &mx28evk_led_data); -} - -static void __init mx28evk_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer mx28evk_timer = { - .init = mx28evk_timer_init, -}; - -MACHINE_START(MX28EVK, "Freescale MX28 EVK") - /* Maintainer: Freescale Semiconductor, Inc. */ - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &mx28evk_timer, - .init_machine = mx28evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c deleted file mode 100644 index 6548965e4a76..000000000000 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * board setup for STMP378x-Development-Board - * - * based on mx23evk board setup and information gained form the original - * plat-stmp based board setup, now converted to mach-mxs. - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx23.h" - -#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) -#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) - -#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL) - -static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = { - /* duart (extended setup missing in old boardcode, too */ - MX23_PAD_PWM0__DUART_RX, - MX23_PAD_PWM1__DUART_TX, - - /* auart */ - MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART, - - /* mmc */ - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_CMD__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DETECT__SSP1_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_SSP1_SCK__SSP1_SCK | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */ - MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */ -}; - -static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = { - .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT, -}; - -static struct spi_board_info spi_board_info[] __initdata = { -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) - { - .modalias = "enc28j60", - .max_speed_hz = 6 * 1000 * 1000, - .bus_num = 1, - .chip_select = 0, - .platform_data = NULL, - }, -#endif -}; - -static void __init stmp378x_dvb_init(void) -{ - int ret; - - mx23_soc_init(); - - mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads, - ARRAY_SIZE(stmp378x_dvb_pads)); - - mx23_add_duart(); - mx23_add_auart0(); - mx23_add_rtc_stmp3xxx(); - - /* power on mmc slot */ - ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER, - GPIOF_OUT_INIT_LOW, "mmc0-slot-power"); - if (ret) - pr_warn("could not power mmc (%d)\n", ret); - - mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata); - - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); -} - -static void __init stmp378x_dvb_timer_init(void) -{ - mx23_clocks_init(); -} - -static struct sys_timer stmp378x_dvb_timer = { - .init = stmp378x_dvb_timer_init, -}; - -MACHINE_START(STMP378X, "STMP378X") - .map_io = mx23_map_io, - .init_irq = mx23_init_irq, - .timer = &stmp378x_dvb_timer, - .init_machine = stmp378x_dvb_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c deleted file mode 100644 index 8837029de1a4..000000000000 --- a/arch/arm/mach-mxs/mach-tx28.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Copyright (C) 2010 - * - * based on: mach-mx28_evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "devices-mx28.h" -#include "module-tx28.h" - -#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10) - -static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { - /* LED */ - MX28_PAD_ENET0_RXD3__GPIO_4_10 | - MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL, - - /* framebuffer */ -#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA) - MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE, - MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE, - MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE, - MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE, - MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE, - MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE, - MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE, - MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE, - MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE, - MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE, - MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE, - MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE, - MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE, - MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE, - MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE, - MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE, - MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE, - MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE, - MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE, - MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE, - MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE, - MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE, - MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE, - MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE, - MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE, - MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE, - MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE, - MX28_PAD_LCD_CS__LCD_CS | LCD_MODE, - MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE, - MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE, - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE, - MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE, - MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE, - MX28_PAD_PWM0__PWM_0 | LCD_MODE, - - /* UART1 */ - MX28_PAD_AUART0_CTS__DUART_RX, - MX28_PAD_AUART0_RTS__DUART_TX, - MX28_PAD_AUART0_TX__DUART_RTS, - MX28_PAD_AUART0_RX__DUART_CTS, - - /* UART2 */ - MX28_PAD_AUART1_RX__AUART1_RX, - MX28_PAD_AUART1_TX__AUART1_TX, - MX28_PAD_AUART1_RTS__AUART1_RTS, - MX28_PAD_AUART1_CTS__AUART1_CTS, - - /* CAN */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* TSC2007 */ - MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP, - - /* MMC0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), -}; - -static const struct gpio_led tx28_stk5v3_leds[] __initconst = { - { - .name = "GPIO-LED", - .default_trigger = "heartbeat", - .gpio = TX28_STK5_GPIO_LED, - }, -}; - -static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = { - .leds = tx28_stk5v3_leds, - .num_leds = ARRAY_SIZE(tx28_stk5v3_leds), -}; - -static struct spi_board_info tx28_spi_board_info[] = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT, - .mode = SPI_MODE_0, - }, -}; - -static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, -}; - -static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - -static void __init tx28_stk5v3_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, - ARRAY_SIZE(tx28_stk5v3_pads)); - - mx28_add_duart(); /* UART1 */ - mx28_add_auart(1); /* UART2 */ - - tx28_add_fec0(); - /* spi via ssp will be added when available */ - spi_register_board_info(tx28_spi_board_info, - ARRAY_SIZE(tx28_spi_board_info)); - gpio_led_register_device(0, &tx28_stk5v3_led_data); - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, - ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); - mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); - mx28_add_rtc_stmp3xxx(); -} - -static void __init tx28_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer tx28_timer = { - .init = tx28_timer_init, -}; - -MACHINE_START(TX28, "Ka-Ro electronics TX28 module") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &tx28_timer, - .init_machine = tx28_stk5v3_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c deleted file mode 100644 index 0f71f82101cc..000000000000 --- a/arch/arm/mach-mxs/module-tx28.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 2010 - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include -#include -#include - -#include -#include "devices-mx28.h" - -#include "module-tx28.h" - -#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) -#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) - -static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { - /* PHY POWER */ - MX28_PAD_PWM4__GPIO_3_29 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - /* PHY RESET */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - /* Mode strap pins 0-2 */ - MX28_PAD_ENET0_RXD0__GPIO_4_3 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - MX28_PAD_ENET0_RXD1__GPIO_4_4 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - MX28_PAD_ENET0_RX_EN__GPIO_4_2 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - /* nINT */ - MX28_PAD_ENET0_TX_CLK__GPIO_4_5 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - - MX28_PAD_ENET0_MDC__GPIO_4_0, - MX28_PAD_ENET0_MDIO__GPIO_4_1, - MX28_PAD_ENET0_TX_EN__GPIO_4_6, - MX28_PAD_ENET0_TXD0__GPIO_4_7, - MX28_PAD_ENET0_TXD1__GPIO_4_8, - MX28_PAD_ENET_CLK__GPIO_4_16, -}; - -#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) -static const iomux_cfg_t tx28_fec0_pads[] __initconst = { - MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, -}; - -static const iomux_cfg_t tx28_fec1_pads[] __initconst = { - MX28_PAD_ENET0_RXD2__ENET1_RXD0, - MX28_PAD_ENET0_RXD3__ENET1_RXD1, - MX28_PAD_ENET0_TXD2__ENET1_TXD0, - MX28_PAD_ENET0_TXD3__ENET1_TXD1, - MX28_PAD_ENET0_COL__ENET1_TX_EN, - MX28_PAD_ENET0_CRS__ENET1_RX_EN, -}; - -static const struct fec_platform_data tx28_fec0_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct fec_platform_data tx28_fec1_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -int __init tx28_add_fec0(void) -{ - int i, ret; - - pr_debug("%s: Switching FEC PHY power off\n", __func__); - ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads, - ARRAY_SIZE(tx28_fec_gpio_pads)); - for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) { - unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i])); - - ret = gpio_request(gpio, "FEC"); - if (ret) { - pr_err("Failed to request GPIO_%d_%d: %d\n", - PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i]), ret); - goto free_gpios; - } - ret = gpio_direction_output(gpio, 0); - if (ret) { - pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n", - gpio / 32 + 1, gpio % 32, ret); - goto free_gpios; - } - } - - /* Power up fec phy */ - pr_debug("%s: Switching FEC PHY power on\n", __func__); - ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1); - if (ret) { - pr_err("Failed to power on PHY: %d\n", ret); - goto free_gpios; - } - mdelay(26); /* 25ms according to data sheet */ - - /* nINT */ - gpio_direction_input(MXS_GPIO_NR(4, 5)); - /* Mode strap pins */ - gpio_direction_output(MXS_GPIO_NR(4, 2), 1); - gpio_direction_output(MXS_GPIO_NR(4, 3), 1); - gpio_direction_output(MXS_GPIO_NR(4, 4), 1); - - udelay(100); /* minimum assertion time for nRST */ - - pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); - gpio_set_value(TX28_FEC_PHY_RESET, 1); - - ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads, - ARRAY_SIZE(tx28_fec0_pads)); - if (ret) { - pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", - __func__, ret); - goto free_gpios; - } - pr_debug("%s: Registering FEC0 device\n", __func__); - mx28_add_fec(0, &tx28_fec0_data); - return 0; - -free_gpios: - while (--i >= 0) { - unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i])); - - gpio_free(gpio); - } - - return ret; -} - -int __init tx28_add_fec1(void) -{ - int ret; - - ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads, - ARRAY_SIZE(tx28_fec1_pads)); - if (ret) { - pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", - __func__, ret); - return ret; - } - pr_debug("%s: Registering FEC1 device\n", __func__); - mx28_add_fec(1, &tx28_fec1_data); - return 0; -} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h deleted file mode 100644 index 8ed425457d30..000000000000 --- a/arch/arm/mach-mxs/module-tx28.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -int __init tx28_add_fec0(void); -int __init tx28_add_fec1(void); -- 2.20.1