From a88394cfb58007cca945699545469017beb0d206 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 May 2011 07:15:19 -0700 Subject: [PATCH] ewrk3/tulip: Move the DEC - Tulip drivers Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/ and make the necessary Kconfig and Makefile changes. The Digital Equioment (DEC) driver ewrk3 was moved into drivers/net/ethernet/dec/ and the remaining drivers (Tulip) were moved into drivers/net/ethernet/dec/tulip/ CC: Tobias Ringstrom CC: Grant Grundler CC: David Davies Signed-off-by: Jeff Kirsher Acked-by: Grant Grundler --- MAINTAINERS | 4 +-- drivers/net/Kconfig | 16 --------- drivers/net/Makefile | 2 -- drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/dec/Kconfig | 36 +++++++++++++++++++ drivers/net/ethernet/dec/Makefile | 6 ++++ drivers/net/{ => ethernet/dec}/ewrk3.c | 0 drivers/net/{ => ethernet/dec}/ewrk3.h | 0 drivers/net/{ => ethernet/dec}/tulip/21142.c | 0 drivers/net/{ => ethernet/dec}/tulip/Kconfig | 20 +++++------ drivers/net/{ => ethernet/dec}/tulip/Makefile | 0 .../net/{ => ethernet/dec}/tulip/de2104x.c | 0 drivers/net/{ => ethernet/dec}/tulip/de4x5.c | 0 drivers/net/{ => ethernet/dec}/tulip/de4x5.h | 0 drivers/net/{ => ethernet/dec}/tulip/dmfe.c | 0 drivers/net/{ => ethernet/dec}/tulip/eeprom.c | 0 .../net/{ => ethernet/dec}/tulip/interrupt.c | 0 drivers/net/{ => ethernet/dec}/tulip/media.c | 0 drivers/net/{ => ethernet/dec}/tulip/pnic.c | 0 drivers/net/{ => ethernet/dec}/tulip/pnic2.c | 0 drivers/net/{ => ethernet/dec}/tulip/timer.c | 0 drivers/net/{ => ethernet/dec}/tulip/tulip.h | 0 .../net/{ => ethernet/dec}/tulip/tulip_core.c | 0 .../net/{ => ethernet/dec}/tulip/uli526x.c | 0 .../{ => ethernet/dec}/tulip/winbond-840.c | 0 .../net/{ => ethernet/dec}/tulip/xircom_cb.c | 0 27 files changed, 56 insertions(+), 30 deletions(-) create mode 100644 drivers/net/ethernet/dec/Kconfig create mode 100644 drivers/net/ethernet/dec/Makefile rename drivers/net/{ => ethernet/dec}/ewrk3.c (100%) rename drivers/net/{ => ethernet/dec}/ewrk3.h (100%) rename drivers/net/{ => ethernet/dec}/tulip/21142.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/Kconfig (96%) rename drivers/net/{ => ethernet/dec}/tulip/Makefile (100%) rename drivers/net/{ => ethernet/dec}/tulip/de2104x.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/de4x5.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/de4x5.h (100%) rename drivers/net/{ => ethernet/dec}/tulip/dmfe.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/eeprom.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/interrupt.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/media.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/pnic.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/pnic2.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/timer.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/tulip.h (100%) rename drivers/net/{ => ethernet/dec}/tulip/tulip_core.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/uli526x.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/winbond-840.c (100%) rename drivers/net/{ => ethernet/dec}/tulip/xircom_cb.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 26fa497e3733..fbafbb68ae59 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2073,7 +2073,7 @@ DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER L: netdev@vger.kernel.org S: Orphan F: Documentation/networking/dmfe.txt -F: drivers/net/tulip/dmfe.c +F: drivers/net/ethernet/tulip/dmfe.c DC390/AM53C974 SCSI driver M: Kurt Garloff @@ -6514,7 +6514,7 @@ TULIP NETWORK DRIVERS M: Grant Grundler L: netdev@vger.kernel.org S: Maintained -F: drivers/net/tulip/ +F: drivers/net/ethernet/tulip/ TUN/TAP driver M: Maxim Krasnyansky diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c8779c13af89..0cb136c1d6db 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -452,8 +452,6 @@ config DNET To compile this driver as a module, choose M here: the module will be called dnet. -source "drivers/net/tulip/Kconfig" - config AT1700 tristate "AT1700/1720 support (EXPERIMENTAL)" depends on (ISA || MCA_LEGACY) && EXPERIMENTAL @@ -494,20 +492,6 @@ config NET_ISA the remaining ISA network card questions. If you say Y, you will be asked for your specific card in the following questions. -config EWRK3 - tristate "EtherWORKS 3 (DE203, DE204, DE205) support" - depends on NET_ISA - select CRC32 - ---help--- - This driver supports the DE203, DE204 and DE205 network (Ethernet) - cards. If this is for you, say Y and read - in the kernel source as - well as the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called ewrk3. - config ETH16I tristate "ICL EtherTeam 16i/32 support" depends on NET_ISA diff --git a/drivers/net/Makefile b/drivers/net/Makefile index db888b0bcd5d..8a56733452ff 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -106,7 +106,6 @@ obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_CPMAC) += cpmac.o -obj-$(CONFIG_EWRK3) += ewrk3.o obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_EQUALIZER) += eql.o @@ -147,7 +146,6 @@ obj-$(CONFIG_USB_IPHETH) += usb/ obj-$(CONFIG_USB_CDC_PHONET) += usb/ obj-$(CONFIG_WLAN) += wireless/ -obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 9410f20241f6..ed428501abba 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -19,6 +19,7 @@ source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" +source "drivers/net/ethernet/dec/Kconfig" source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 5d89fd9d672b..3de82490adec 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ +obj-$(CONFIG_NET_VENDOR_DEC) += dec/ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/ diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig new file mode 100644 index 000000000000..40e8df9fde8d --- /dev/null +++ b/drivers/net/ethernet/dec/Kconfig @@ -0,0 +1,36 @@ +# +# Digital Equipment Inc network device configuration +# + +config NET_VENDOR_DEC + bool "Digital Equipment devices" + depends on PCI || EISA || CARDBUS + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about DEC cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_DEC + +config EWRK3 + tristate "EtherWORKS 3 (DE203, DE204, DE205) support" + depends on ISA + select CRC32 + ---help--- + This driver supports the DE203, DE204 and DE205 network (Ethernet) + cards. If this is for you, say Y and read + in the kernel source as + well as the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called ewrk3. + +source "drivers/net/ethernet/dec/tulip/Kconfig" + +endif # NET_VENDOR_DEC diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile new file mode 100644 index 000000000000..1b01ed8d42c8 --- /dev/null +++ b/drivers/net/ethernet/dec/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Digital Equipment Inc. network device drivers. +# + +obj-$(CONFIG_EWRK3) += ewrk3.o +obj-$(CONFIG_NET_TULIP) += tulip/ diff --git a/drivers/net/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c similarity index 100% rename from drivers/net/ewrk3.c rename to drivers/net/ethernet/dec/ewrk3.c diff --git a/drivers/net/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h similarity index 100% rename from drivers/net/ewrk3.h rename to drivers/net/ethernet/dec/ewrk3.h diff --git a/drivers/net/tulip/21142.c b/drivers/net/ethernet/dec/tulip/21142.c similarity index 100% rename from drivers/net/tulip/21142.c rename to drivers/net/ethernet/dec/tulip/21142.c diff --git a/drivers/net/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig similarity index 96% rename from drivers/net/tulip/Kconfig rename to drivers/net/ethernet/dec/tulip/Kconfig index 1f8d4a8d8ea4..f6af772b12c9 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/ethernet/dec/tulip/Kconfig @@ -2,10 +2,10 @@ # Tulip family network device configuration # -menuconfig NET_TULIP - bool "\"Tulip\" family network device support" - depends on PCI || EISA || CARDBUS - help +config NET_TULIP + bool "DEC - Tulip devices" + depends on (PCI || EISA || CARDBUS) + ---help--- This selects the "Tulip" family of EISA/PCI network cards. if NET_TULIP @@ -32,7 +32,7 @@ config DE2104X_DSL depends on DE2104X range 0 31 default 0 - help + ---help--- Setting this value allows to align ring buffer descriptors into their own cache lines. Value of 4 corresponds to the typical 32 byte line (the descriptor is 16 bytes). This is necessary on systems that lack @@ -59,7 +59,7 @@ config TULIP config TULIP_MWI bool "New bus configuration (EXPERIMENTAL)" depends on TULIP && EXPERIMENTAL - help + ---help--- This configures your Tulip card specifically for the card and system cache line size type you are using. @@ -70,7 +70,7 @@ config TULIP_MWI config TULIP_MMIO bool "Use PCI shared mem for NIC registers" depends on TULIP - help + ---help--- Use PCI shared memory for the NIC registers, rather than going through the Tulip's PIO (programmed I/O ports). Faster, but could produce obscure bugs if your mainboard has memory controller timing issues. @@ -79,7 +79,7 @@ config TULIP_MMIO config TULIP_NAPI bool "Use RX polling (NAPI)" depends on TULIP - help + ---help--- NAPI is a new driver API designed to reduce CPU and interrupt load when the driver is receiving lots of packets from the card. It is still somewhat experimental and thus not yet enabled by default. @@ -107,7 +107,7 @@ config TULIP_DM910X config DE4X5 tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA" - depends on PCI || EISA + depends on (PCI || EISA) select CRC32 ---help--- This is support for the DIGITAL series of PCI/EISA Ethernet cards. @@ -126,7 +126,7 @@ config WINBOND_840 depends on PCI select CRC32 select MII - help + ---help--- This driver is for the Winbond W89c840 chip. It also works with the TX9882 chip on the Compex RL100-ATX board. More specific information and updates are available from diff --git a/drivers/net/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile similarity index 100% rename from drivers/net/tulip/Makefile rename to drivers/net/ethernet/dec/tulip/Makefile diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c similarity index 100% rename from drivers/net/tulip/de2104x.c rename to drivers/net/ethernet/dec/tulip/de2104x.c diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c similarity index 100% rename from drivers/net/tulip/de4x5.c rename to drivers/net/ethernet/dec/tulip/de4x5.c diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h similarity index 100% rename from drivers/net/tulip/de4x5.h rename to drivers/net/ethernet/dec/tulip/de4x5.h diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c similarity index 100% rename from drivers/net/tulip/dmfe.c rename to drivers/net/ethernet/dec/tulip/dmfe.c diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c similarity index 100% rename from drivers/net/tulip/eeprom.c rename to drivers/net/ethernet/dec/tulip/eeprom.c diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c similarity index 100% rename from drivers/net/tulip/interrupt.c rename to drivers/net/ethernet/dec/tulip/interrupt.c diff --git a/drivers/net/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c similarity index 100% rename from drivers/net/tulip/media.c rename to drivers/net/ethernet/dec/tulip/media.c diff --git a/drivers/net/tulip/pnic.c b/drivers/net/ethernet/dec/tulip/pnic.c similarity index 100% rename from drivers/net/tulip/pnic.c rename to drivers/net/ethernet/dec/tulip/pnic.c diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c similarity index 100% rename from drivers/net/tulip/pnic2.c rename to drivers/net/ethernet/dec/tulip/pnic2.c diff --git a/drivers/net/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c similarity index 100% rename from drivers/net/tulip/timer.c rename to drivers/net/ethernet/dec/tulip/timer.c diff --git a/drivers/net/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h similarity index 100% rename from drivers/net/tulip/tulip.h rename to drivers/net/ethernet/dec/tulip/tulip.h diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c similarity index 100% rename from drivers/net/tulip/tulip_core.c rename to drivers/net/ethernet/dec/tulip/tulip_core.c diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c similarity index 100% rename from drivers/net/tulip/uli526x.c rename to drivers/net/ethernet/dec/tulip/uli526x.c diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c similarity index 100% rename from drivers/net/tulip/winbond-840.c rename to drivers/net/ethernet/dec/tulip/winbond-840.c diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c similarity index 100% rename from drivers/net/tulip/xircom_cb.c rename to drivers/net/ethernet/dec/tulip/xircom_cb.c -- 2.20.1