From a6a5325239c20202e18e21e94291bccc659fbf9e Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Fri, 18 Jul 2008 11:37:13 +0800 Subject: [PATCH] atl1e: Atheros L1E Gigabit Ethernet driver Full patch for the Atheros L1E Gigabit Ethernet driver. Supportring AR8121, AR8113 and AR8114 Signed-off-by: Jie Yang Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 11 + drivers/net/Makefile | 1 + drivers/net/atl1e/Makefile | 2 + drivers/net/atl1e/atl1e.h | 503 ++++++ drivers/net/atl1e/atl1e_ethtool.c | 405 +++++ drivers/net/atl1e/atl1e_hw.c | 664 ++++++++ drivers/net/atl1e/atl1e_hw.h | 793 +++++++++ drivers/net/atl1e/atl1e_main.c | 2599 +++++++++++++++++++++++++++++ drivers/net/atl1e/atl1e_param.c | 263 +++ 9 files changed, 5241 insertions(+) create mode 100644 drivers/net/atl1e/Makefile create mode 100644 drivers/net/atl1e/atl1e.h create mode 100644 drivers/net/atl1e/atl1e_ethtool.c create mode 100644 drivers/net/atl1e/atl1e_hw.c create mode 100644 drivers/net/atl1e/atl1e_hw.h create mode 100644 drivers/net/atl1e/atl1e_main.c create mode 100644 drivers/net/atl1e/atl1e_param.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3e5e64c33e18..32b89b0975ae 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2304,6 +2304,17 @@ config ATL1 To compile this driver as a module, choose M here. The module will be called atl1. +config ATL1E + tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + help + This driver supports the Atheros L1E gigabit ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl1e. + endif # NETDEV_1000 # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4b17a9ab7861..7629c9017215 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_EHEA) += ehea/ obj-$(CONFIG_CAN) += can/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_ATL1) += atlx/ +obj-$(CONFIG_ATL1E) += atl1e/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o obj-$(CONFIG_TEHUTI) += tehuti.o diff --git a/drivers/net/atl1e/Makefile b/drivers/net/atl1e/Makefile new file mode 100644 index 000000000000..bc11be824e76 --- /dev/null +++ b/drivers/net/atl1e/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ATL1E) += atl1e.o +atl1e-objs += atl1e_main.o atl1e_hw.o atl1e_ethtool.o atl1e_param.o diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/atl1e/atl1e.h new file mode 100644 index 000000000000..b645fa0f3f64 --- /dev/null +++ b/drivers/net/atl1e/atl1e.h @@ -0,0 +1,503 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * Copyright(c) 2007 xiong huang + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1E_H_ +#define _ATL1E_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "atl1e_hw.h" + +#define PCI_REG_COMMAND 0x04 /* PCI Command Register */ +#define CMD_IO_SPACE 0x0001 +#define CMD_MEMORY_SPACE 0x0002 +#define CMD_BUS_MASTER 0x0004 + +#define BAR_0 0 +#define BAR_1 1 +#define BAR_5 5 + +/* Wake Up Filter Control */ +#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +#define SPEED_0 0xffff +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +/* Error Codes */ +#define AT_ERR_EEPROM 1 +#define AT_ERR_PHY 2 +#define AT_ERR_CONFIG 3 +#define AT_ERR_PARAM 4 +#define AT_ERR_MAC_TYPE 5 +#define AT_ERR_PHY_TYPE 6 +#define AT_ERR_PHY_SPEED 7 +#define AT_ERR_PHY_RES 8 +#define AT_ERR_TIMEOUT 9 + +#define MAX_JUMBO_FRAME_SIZE 0x2000 + +#define AT_VLAN_TAG_TO_TPD_TAG(_vlan, _tpd) \ + _tpd = (((_vlan) << (4)) | (((_vlan) >> 13) & 7) |\ + (((_vlan) >> 9) & 8)) + +#define AT_TPD_TAG_TO_VLAN_TAG(_tpd, _vlan) \ + _vlan = (((_tpd) >> 8) | (((_tpd) & 0x77) << 9) |\ + (((_tdp) & 0x88) << 5)) + +#define AT_MAX_RECEIVE_QUEUE 4 +#define AT_PAGE_NUM_PER_QUEUE 2 + +#define AT_DMA_HI_ADDR_MASK 0xffffffff00000000ULL +#define AT_DMA_LO_ADDR_MASK 0x00000000ffffffffULL + +#define AT_TX_WATCHDOG (5 * HZ) +#define AT_MAX_INT_WORK 10 +#define AT_TWSI_EEPROM_TIMEOUT 100 +#define AT_HW_MAX_IDLE_DELAY 10 +#define AT_SUSPEND_LINK_TIMEOUT 28 + +#define AT_REGS_LEN 75 +#define AT_EEPROM_LEN 512 +#define AT_ADV_MASK (ADVERTISE_10_HALF |\ + ADVERTISE_10_FULL |\ + ADVERTISE_100_HALF |\ + ADVERTISE_100_FULL |\ + ADVERTISE_1000_FULL) + +/* tpd word 2 */ +#define TPD_BUFLEN_MASK 0x3FFF +#define TPD_BUFLEN_SHIFT 0 +#define TPD_DMAINT_MASK 0x0001 +#define TPD_DMAINT_SHIFT 14 +#define TPD_PKTNT_MASK 0x0001 +#define TPD_PKTINT_SHIFT 15 +#define TPD_VLANTAG_MASK 0xFFFF +#define TPD_VLAN_SHIFT 16 + +/* tpd word 3 bits 0:4 */ +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 0 +#define TPD_IP_VERSION_MASK 0x0001 +#define TPD_IP_VERSION_SHIFT 1 /* 0 : IPV4, 1 : IPV6 */ +#define TPD_INS_VL_TAG_MASK 0x0001 +#define TPD_INS_VL_TAG_SHIFT 2 +#define TPD_CC_SEGMENT_EN_MASK 0x0001 +#define TPD_CC_SEGMENT_EN_SHIFT 3 +#define TPD_SEGMENT_EN_MASK 0x0001 +#define TPD_SEGMENT_EN_SHIFT 4 + +/* tdp word 3 bits 5:7 if ip version is 0 */ +#define TPD_IP_CSUM_MASK 0x0001 +#define TPD_IP_CSUM_SHIFT 5 +#define TPD_TCP_CSUM_MASK 0x0001 +#define TPD_TCP_CSUM_SHIFT 6 +#define TPD_UDP_CSUM_MASK 0x0001 +#define TPD_UDP_CSUM_SHIFT 7 + +/* tdp word 3 bits 5:7 if ip version is 1 */ +#define TPD_V6_IPHLLO_MASK 0x0007 +#define TPD_V6_IPHLLO_SHIFT 7 + +/* tpd word 3 bits 8:9 bit */ +#define TPD_VL_TAGGED_MASK 0x0001 +#define TPD_VL_TAGGED_SHIFT 8 +#define TPD_ETHTYPE_MASK 0x0001 +#define TPD_ETHTYPE_SHIFT 9 + +/* tdp word 3 bits 10:13 if ip version is 0 */ +#define TDP_V4_IPHL_MASK 0x000F +#define TPD_V4_IPHL_SHIFT 10 + +/* tdp word 3 bits 10:13 if ip version is 1 */ +#define TPD_V6_IPHLHI_MASK 0x000F +#define TPD_V6_IPHLHI_SHIFT 10 + +/* tpd word 3 bit 14:31 if segment enabled */ +#define TPD_TCPHDRLEN_MASK 0x000F +#define TPD_TCPHDRLEN_SHIFT 14 +#define TPD_HDRFLAG_MASK 0x0001 +#define TPD_HDRFLAG_SHIFT 18 +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 19 + +/* tdp word 3 bit 16:31 if custom csum enabled */ +#define TPD_PLOADOFFSET_MASK 0x00FF +#define TPD_PLOADOFFSET_SHIFT 16 +#define TPD_CCSUMOFFSET_MASK 0x00FF +#define TPD_CCSUMOFFSET_SHIFT 24 + +struct atl1e_tpd_desc { + __le64 buffer_addr; + __le32 word2; + __le32 word3; +}; + +/* how about 0x2000 */ +#define MAX_TX_BUF_LEN 0x2000 +#define MAX_TX_BUF_SHIFT 13 +/*#define MAX_TX_BUF_LEN 0x3000 */ + +/* rrs word 1 bit 0:31 */ +#define RRS_RX_CSUM_MASK 0xFFFF +#define RRS_RX_CSUM_SHIFT 0 +#define RRS_PKT_SIZE_MASK 0x3FFF +#define RRS_PKT_SIZE_SHIFT 16 +#define RRS_CPU_NUM_MASK 0x0003 +#define RRS_CPU_NUM_SHIFT 30 + +#define RRS_IS_RSS_IPV4 0x0001 +#define RRS_IS_RSS_IPV4_TCP 0x0002 +#define RRS_IS_RSS_IPV6 0x0004 +#define RRS_IS_RSS_IPV6_TCP 0x0008 +#define RRS_IS_IPV6 0x0010 +#define RRS_IS_IP_FRAG 0x0020 +#define RRS_IS_IP_DF 0x0040 +#define RRS_IS_802_3 0x0080 +#define RRS_IS_VLAN_TAG 0x0100 +#define RRS_IS_ERR_FRAME 0x0200 +#define RRS_IS_IPV4 0x0400 +#define RRS_IS_UDP 0x0800 +#define RRS_IS_TCP 0x1000 +#define RRS_IS_BCAST 0x2000 +#define RRS_IS_MCAST 0x4000 +#define RRS_IS_PAUSE 0x8000 + +#define RRS_ERR_BAD_CRC 0x0001 +#define RRS_ERR_CODE 0x0002 +#define RRS_ERR_DRIBBLE 0x0004 +#define RRS_ERR_RUNT 0x0008 +#define RRS_ERR_RX_OVERFLOW 0x0010 +#define RRS_ERR_TRUNC 0x0020 +#define RRS_ERR_IP_CSUM 0x0040 +#define RRS_ERR_L4_CSUM 0x0080 +#define RRS_ERR_LENGTH 0x0100 +#define RRS_ERR_DES_ADDR 0x0200 + +struct atl1e_recv_ret_status { + u16 seq_num; + u16 hash_lo; + __le32 word1; + u16 pkt_flag; + u16 err_flag; + u16 hash_hi; + u16 vtag; +}; + +enum atl1e_dma_req_block { + atl1e_dma_req_128 = 0, + atl1e_dma_req_256 = 1, + atl1e_dma_req_512 = 2, + atl1e_dma_req_1024 = 3, + atl1e_dma_req_2048 = 4, + atl1e_dma_req_4096 = 5 +}; + +enum atl1e_rrs_type { + atl1e_rrs_disable = 0, + atl1e_rrs_ipv4 = 1, + atl1e_rrs_ipv4_tcp = 2, + atl1e_rrs_ipv6 = 4, + atl1e_rrs_ipv6_tcp = 8 +}; + +enum atl1e_nic_type { + athr_l1e = 0, + athr_l2e_revA = 1, + athr_l2e_revB = 2 +}; + +struct atl1e_hw_stats { + /* rx */ + unsigned long rx_ok; /* The number of good packet received. */ + unsigned long rx_bcast; /* The number of good broadcast packet received. */ + unsigned long rx_mcast; /* The number of good multicast packet received. */ + unsigned long rx_pause; /* The number of Pause packet received. */ + unsigned long rx_ctrl; /* The number of Control packet received other than Pause frame. */ + unsigned long rx_fcs_err; /* The number of packets with bad FCS. */ + unsigned long rx_len_err; /* The number of packets with mismatch of length field and actual size. */ + unsigned long rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ + unsigned long rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ + unsigned long rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ + unsigned long rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ + unsigned long rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ + unsigned long rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ + unsigned long rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ + unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ + unsigned long rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ + unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ + unsigned long rx_sz_ov; /* The number of good and bad packets received that are more than MTU size truncated by Selene. */ + unsigned long rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ + unsigned long rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ + unsigned long rx_align_err; /* Alignment Error */ + unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ + unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ + unsigned long rx_err_addr; /* The number of packets dropped due to address filtering. */ + + /* tx */ + unsigned long tx_ok; /* The number of good packet transmitted. */ + unsigned long tx_bcast; /* The number of good broadcast packet transmitted. */ + unsigned long tx_mcast; /* The number of good multicast packet transmitted. */ + unsigned long tx_pause; /* The number of Pause packet transmitted. */ + unsigned long tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ + unsigned long tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ + unsigned long tx_defer; /* The number of packets transmitted that is deferred. */ + unsigned long tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ + unsigned long tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ + unsigned long tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ + unsigned long tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ + unsigned long tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ + unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ + unsigned long tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ + unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ + unsigned long tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + unsigned long tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + unsigned long tx_late_col; /* The number of packets transmitted with late collisions. */ + unsigned long tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ + unsigned long tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + unsigned long tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ + unsigned long tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ + unsigned long tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ + unsigned long tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ + unsigned long tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ +}; + +struct atl1e_hw { + u8 __iomem *hw_addr; /* inner register address */ + resource_size_t mem_rang; + struct atl1e_adapter *adapter; + enum atl1e_nic_type nic_type; + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + u16 pci_cmd_word; + u8 mac_addr[ETH_ALEN]; + u8 perm_mac_addr[ETH_ALEN]; + u8 preamble_len; + u16 max_frame_size; + u16 rx_jumbo_th; + u16 tx_jumbo_th; + + u16 media_type; +#define MEDIA_TYPE_AUTO_SENSOR 0 +#define MEDIA_TYPE_100M_FULL 1 +#define MEDIA_TYPE_100M_HALF 2 +#define MEDIA_TYPE_10M_FULL 3 +#define MEDIA_TYPE_10M_HALF 4 + + u16 autoneg_advertised; +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u16 imt; /* Interrupt Moderator timer ( 2us resolution) */ + u16 ict; /* Interrupt Clear timer (2us resolution) */ + u32 smb_timer; + u16 rrd_thresh; /* Threshold of number of RRD produced to trigger + interrupt request */ + u16 tpd_thresh; + u16 rx_count_down; /* 2us resolution */ + u16 tx_count_down; + + u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. */ + enum atl1e_rrs_type rrs_type; + u32 base_cpu; + u32 indirect_tab; + + enum atl1e_dma_req_block dmar_block; + enum atl1e_dma_req_block dmaw_block; + u8 dmaw_dly_cnt; + u8 dmar_dly_cnt; + + bool phy_configured; + bool re_autoneg; + bool emi_ca; +}; + +/* + * wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer + */ +struct atl1e_tx_buffer { + struct sk_buff *skb; + u16 length; + dma_addr_t dma; +}; + +struct atl1e_rx_page { + dma_addr_t dma; /* receive rage DMA address */ + u8 *addr; /* receive rage virtual address */ + dma_addr_t write_offset_dma; /* the DMA address which contain the + receive data offset in the page */ + u32 *write_offset_addr; /* the virtaul address which contain + the receive data offset in the page */ + u32 read_offset; /* the offset where we have read */ +}; + +struct atl1e_rx_page_desc { + struct atl1e_rx_page rx_page[AT_PAGE_NUM_PER_QUEUE]; + u8 rx_using; + u16 rx_nxseq; +}; + +/* transmit packet descriptor (tpd) ring */ +struct atl1e_tx_ring { + struct atl1e_tpd_desc *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 count; /* the count of transmit rings */ + rwlock_t tx_lock; + u16 next_to_use; + atomic_t next_to_clean; + struct atl1e_tx_buffer *tx_buffer; + dma_addr_t cmb_dma; + u32 *cmb; +}; + +/* receive packet descriptor ring */ +struct atl1e_rx_ring { + void *desc; + dma_addr_t dma; + int size; + u32 page_size; /* bytes length of rxf page */ + u32 real_page_size; /* real_page_size = page_size + jumbo + aliagn */ + struct atl1e_rx_page_desc rx_page_desc[AT_MAX_RECEIVE_QUEUE]; +}; + +/* board specific private data structure */ +struct atl1e_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + struct vlan_group *vlgrp; + struct napi_struct napi; + struct mii_if_info mii; /* MII interface info */ + struct atl1e_hw hw; + struct atl1e_hw_stats hw_stats; + struct net_device_stats net_stats; + + bool have_msi; + u32 wol; + u16 link_speed; + u16 link_duplex; + + spinlock_t mdio_lock; + spinlock_t tx_lock; + atomic_t irq_sem; + + struct work_struct reset_task; + struct work_struct link_chg_task; + struct timer_list watchdog_timer; + struct timer_list phy_config_timer; + + /* All Descriptor memory */ + dma_addr_t ring_dma; + void *ring_vir_addr; + int ring_size; + + struct atl1e_tx_ring tx_ring; + struct atl1e_rx_ring rx_ring; + int num_rx_queues; + unsigned long flags; +#define __AT_TESTING 0x0001 +#define __AT_RESETTING 0x0002 +#define __AT_DOWN 0x0003 + + u32 bd_number; /* board number;*/ + u32 pci_state[16]; + u32 *config_space; +}; + +#define AT_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + reg))) + +#define AT_WRITE_FLUSH(a) (\ + readl((a)->hw_addr)) + +#define AT_READ_REG(a, reg) ( \ + readl((a)->hw_addr + reg)) + +#define AT_WRITE_REGB(a, reg, value) (\ + writeb((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGB(a, reg) (\ + readb((a)->hw_addr + reg)) + +#define AT_WRITE_REGW(a, reg, value) (\ + writew((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGW(a, reg) (\ + readw((a)->hw_addr + reg)) + +#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), (((a)->hw_addr + reg) + ((offset) << 2)))) + +#define AT_READ_REG_ARRAY(a, reg, offset) ( \ + readl(((a)->hw_addr + reg) + ((offset) << 2))) + +extern char atl1e_driver_name[]; +extern char atl1e_driver_version[]; + +extern void atl1e_check_options(struct atl1e_adapter *adapter); +extern int atl1e_up(struct atl1e_adapter *adapter); +extern void atl1e_down(struct atl1e_adapter *adapter); +extern void atl1e_reinit_locked(struct atl1e_adapter *adapter); +extern s32 atl1e_reset_hw(struct atl1e_hw *hw); +extern void atl1e_set_ethtool_ops(struct net_device *netdev); +#endif /* _ATL1_E_H_ */ diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c new file mode 100644 index 000000000000..cdc3b85b10b9 --- /dev/null +++ b/drivers/net/atl1e/atl1e_ethtool.c @@ -0,0 +1,405 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include +#include + +#include "atl1e.h" + +static int atl1e_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); + if (hw->nic_type == athr_l1e) + ecmd->supported |= SUPPORTED_1000baseT_Full; + + ecmd->advertising = ADVERTISED_TP; + + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->advertising |= hw->autoneg_advertised; + + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (adapter->link_speed != SPEED_0) { + ecmd->speed = adapter->link_speed; + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = AUTONEG_ENABLE; + return 0; +} + +static int atl1e_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + u16 adv4, adv9; + + if ((ecmd->advertising&ADVERTISE_1000_FULL)) { + if (hw->nic_type == athr_l1e) { + hw->autoneg_advertised = + ecmd->advertising & AT_ADV_MASK; + } else { + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + } else if (ecmd->advertising&ADVERTISE_1000_HALF) { + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } else { + hw->autoneg_advertised = + ecmd->advertising & AT_ADV_MASK; + } + ecmd->advertising = hw->autoneg_advertised | + ADVERTISED_TP | ADVERTISED_Autoneg; + + adv4 = hw->mii_autoneg_adv_reg & ~MII_AR_SPEED_MASK; + adv9 = hw->mii_1000t_ctrl_reg & ~MII_AT001_CR_1000T_SPEED_MASK; + if (hw->autoneg_advertised & ADVERTISE_10_HALF) + adv4 |= MII_AR_10T_HD_CAPS; + if (hw->autoneg_advertised & ADVERTISE_10_FULL) + adv4 |= MII_AR_10T_FD_CAPS; + if (hw->autoneg_advertised & ADVERTISE_100_HALF) + adv4 |= MII_AR_100TX_HD_CAPS; + if (hw->autoneg_advertised & ADVERTISE_100_FULL) + adv4 |= MII_AR_100TX_FD_CAPS; + if (hw->autoneg_advertised & ADVERTISE_1000_FULL) + adv9 |= MII_AT001_CR_1000T_FD_CAPS; + + if (adv4 != hw->mii_autoneg_adv_reg || + adv9 != hw->mii_1000t_ctrl_reg) { + hw->mii_autoneg_adv_reg = adv4; + hw->mii_1000t_ctrl_reg = adv9; + hw->re_autoneg = true; + } + + } else { + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + + /* reset the link */ + + if (netif_running(adapter->netdev)) { + atl1e_down(adapter); + atl1e_up(adapter); + } else + atl1e_reset_hw(&adapter->hw); + + clear_bit(__AT_RESETTING, &adapter->flags); + return 0; +} + +static u32 atl1e_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static u32 atl1e_get_msglevel(struct net_device *netdev) +{ +#ifdef DBG + return 1; +#else + return 0; +#endif +} + +static void atl1e_set_msglevel(struct net_device *netdev, u32 data) +{ +} + +static int atl1e_get_regs_len(struct net_device *netdev) +{ + return AT_REGS_LEN * sizeof(u32); +} + +static void atl1e_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + + memset(p, 0, AT_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + regs_buff[0] = AT_READ_REG(hw, REG_VPD_CAP); + regs_buff[1] = AT_READ_REG(hw, REG_SPI_FLASH_CTRL); + regs_buff[2] = AT_READ_REG(hw, REG_SPI_FLASH_CONFIG); + regs_buff[3] = AT_READ_REG(hw, REG_TWSI_CTRL); + regs_buff[4] = AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL); + regs_buff[5] = AT_READ_REG(hw, REG_MASTER_CTRL); + regs_buff[6] = AT_READ_REG(hw, REG_MANUAL_TIMER_INIT); + regs_buff[7] = AT_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT); + regs_buff[8] = AT_READ_REG(hw, REG_GPHY_CTRL); + regs_buff[9] = AT_READ_REG(hw, REG_CMBDISDMA_TIMER); + regs_buff[10] = AT_READ_REG(hw, REG_IDLE_STATUS); + regs_buff[11] = AT_READ_REG(hw, REG_MDIO_CTRL); + regs_buff[12] = AT_READ_REG(hw, REG_SERDES_LOCK); + regs_buff[13] = AT_READ_REG(hw, REG_MAC_CTRL); + regs_buff[14] = AT_READ_REG(hw, REG_MAC_IPG_IFG); + regs_buff[15] = AT_READ_REG(hw, REG_MAC_STA_ADDR); + regs_buff[16] = AT_READ_REG(hw, REG_MAC_STA_ADDR+4); + regs_buff[17] = AT_READ_REG(hw, REG_RX_HASH_TABLE); + regs_buff[18] = AT_READ_REG(hw, REG_RX_HASH_TABLE+4); + regs_buff[19] = AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL); + regs_buff[20] = AT_READ_REG(hw, REG_MTU); + regs_buff[21] = AT_READ_REG(hw, REG_WOL_CTRL); + regs_buff[22] = AT_READ_REG(hw, REG_SRAM_TRD_ADDR); + regs_buff[23] = AT_READ_REG(hw, REG_SRAM_TRD_LEN); + regs_buff[24] = AT_READ_REG(hw, REG_SRAM_RXF_ADDR); + regs_buff[25] = AT_READ_REG(hw, REG_SRAM_RXF_LEN); + regs_buff[26] = AT_READ_REG(hw, REG_SRAM_TXF_ADDR); + regs_buff[27] = AT_READ_REG(hw, REG_SRAM_TXF_LEN); + regs_buff[28] = AT_READ_REG(hw, REG_SRAM_TCPH_ADDR); + regs_buff[29] = AT_READ_REG(hw, REG_SRAM_PKTH_ADDR); + + atl1e_read_phy_reg(hw, MII_BMCR, &phy_data); + regs_buff[73] = (u32)phy_data; + atl1e_read_phy_reg(hw, MII_BMSR, &phy_data); + regs_buff[74] = (u32)phy_data; +} + +static int atl1e_get_eeprom_len(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + if (!atl1e_check_eeprom_exist(&adapter->hw)) + return AT_EEPROM_LEN; + else + return 0; +} + +static int atl1e_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + u32 *eeprom_buff; + int first_dword, last_dword; + int ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EINVAL; + + if (atl1e_check_eeprom_exist(hw)) /* not exist */ + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + + eeprom_buff = kmalloc(sizeof(u32) * + (last_dword - first_dword + 1), GFP_KERNEL); + if (eeprom_buff == NULL) + return -ENOMEM; + + for (i = first_dword; i < last_dword; i++) { + if (!atl1e_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) { + kfree(eeprom_buff); + return -EIO; + } + } + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int atl1e_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + u32 *eeprom_buff; + u32 *ptr; + int first_dword, last_dword; + int ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EINVAL; + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + eeprom_buff = kmalloc(AT_EEPROM_LEN, GFP_KERNEL); + if (eeprom_buff == NULL) + return -ENOMEM; + + ptr = (u32 *)eeprom_buff; + + if (eeprom->offset & 3) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + if (!atl1e_read_eeprom(hw, first_dword * 4, &(eeprom_buff[0]))) { + ret_val = -EIO; + goto out; + } + ptr++; + } + if (((eeprom->offset + eeprom->len) & 3)) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + + if (!atl1e_read_eeprom(hw, last_dword * 4, + &(eeprom_buff[last_dword - first_dword]))) { + ret_val = -EIO; + goto out; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_dword - first_dword + 1; i++) { + if (!atl1e_write_eeprom(hw, ((first_dword + i) * 4), + eeprom_buff[i])) { + ret_val = -EIO; + goto out; + } + } +out: + kfree(eeprom_buff); + return ret_val; +} + +static void atl1e_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, atl1e_driver_name, 32); + strncpy(drvinfo->version, atl1e_driver_version, 32); + strncpy(drvinfo->fw_version, "L1e", 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = atl1e_get_regs_len(netdev); + drvinfo->eedump_len = atl1e_get_eeprom_len(netdev); +} + +static void atl1e_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_MAGIC | WAKE_PHY; + wol->wolopts = 0; + + if (adapter->wol & AT_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & AT_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & AT_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & AT_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & AT_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; + + return; +} + +static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE | + WAKE_MCAST | WAKE_BCAST | WAKE_MCAST)) + return -EOPNOTSUPP; + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= AT_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= AT_WUFC_LNKC; + + return 0; +} + +static int atl1e_nway_reset(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + atl1e_reinit_locked(adapter); + return 0; +} + +static struct ethtool_ops atl1e_ethtool_ops = { + .get_settings = atl1e_get_settings, + .set_settings = atl1e_set_settings, + .get_drvinfo = atl1e_get_drvinfo, + .get_regs_len = atl1e_get_regs_len, + .get_regs = atl1e_get_regs, + .get_wol = atl1e_get_wol, + .set_wol = atl1e_set_wol, + .get_msglevel = atl1e_get_msglevel, + .set_msglevel = atl1e_set_msglevel, + .nway_reset = atl1e_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = atl1e_get_eeprom_len, + .get_eeprom = atl1e_get_eeprom, + .set_eeprom = atl1e_set_eeprom, + .get_tx_csum = atl1e_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, +#endif +}; + +void atl1e_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &atl1e_ethtool_ops); +} diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c new file mode 100644 index 000000000000..949e75358bf0 --- /dev/null +++ b/drivers/net/atl1e/atl1e_hw.c @@ -0,0 +1,664 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include +#include +#include +#include + +#include "atl1e.h" + +/* + * check_eeprom_exist + * return 0 if eeprom exist + */ +int atl1e_check_eeprom_exist(struct atl1e_hw *hw) +{ + u32 value; + + value = AT_READ_REG(hw, REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + AT_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value); + } + value = AT_READ_REGW(hw, REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +void atl1e_hw_set_mac_addr(struct atl1e_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* + * atl1e_get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1e_get_permanent_address(struct atl1e_hw *hw) +{ + u32 addr[2]; + u32 i; + u32 twsi_ctrl_data; + u8 eth_addr[ETH_ALEN]; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1e_check_eeprom_exist(hw)) { + /* eeprom exist */ + twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL); + twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; + AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); + for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { + msleep(10); + twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL); + if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) + break; + } + if (i >= AT_TWSI_EEPROM_TIMEOUT) + return AT_ERR_TIMEOUT; + } + + /* maybe MAC-address is from BIOS */ + addr[0] = AT_READ_REG(hw, REG_MAC_STA_ADDR); + addr[1] = AT_READ_REG(hw, REG_MAC_STA_ADDR + 4); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *)&addr[1]); + + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return AT_ERR_EEPROM; +} + +bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value) +{ + return true; +} + +bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value) +{ + int i; + u32 control; + + if (offset & 3) + return false; /* address do not align */ + + AT_WRITE_REG(hw, REG_VPD_DATA, 0); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + AT_WRITE_REG(hw, REG_VPD_CAP, control); + + for (i = 0; i < 10; i++) { + msleep(2); + control = AT_READ_REG(hw, REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = AT_READ_REG(hw, REG_VPD_DATA); + return true; + } + return false; /* timeout */ +} + +void atl1e_force_ps(struct atl1e_hw *hw) +{ + AT_WRITE_REGW(hw, REG_GPHY_CTRL, + GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET); +} + +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +int atl1e_read_mac_addr(struct atl1e_hw *hw) +{ + int err = 0; + + err = atl1e_get_permanent_address(hw); + if (err) + return AT_ERR_EEPROM; + memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); + return 0; +} + +/* + * atl1e_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) +{ + u32 crc32; + u32 value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + crc32 = ~crc32; + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +int atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + wmb(); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = AT_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + wmb(); + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16)val; + return 0; + } + + return AT_ERR_PHY; +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +int atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr&MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + wmb(); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = AT_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + wmb(); + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return AT_ERR_PHY; +} + +/* + * atl1e_init_pcie - init PCIE module + */ +static void atl1e_init_pcie(struct atl1e_hw *hw) +{ + u32 value; + /* comment 2lines below to save more power when sususpend + value = LTSSM_TEST_MODE_DEF; + AT_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value); + */ + + /* pcie flow control mode change */ + value = AT_READ_REG(hw, 0x1008); + value |= 0x8000; + AT_WRITE_REG(hw, 0x1008, value); +} +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw) +{ + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + if (0 != hw->mii_autoneg_adv_reg) + return 0; + /* Read the MII Auto-Neg Advertisement Register (Address 4/9). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK; + + /* + * Need to parse autoneg_advertised and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; + + /* + * Need to parse MediaType and setup the + * appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + hw->autoneg_advertised = ADVERTISE_10_HALF | + ADVERTISE_10_FULL | + ADVERTISE_100_HALF | + ADVERTISE_100_FULL; + if (hw->nic_type == athr_l1e) { + mii_1000t_ctrl_reg |= + MII_AT001_CR_1000T_FD_CAPS; + hw->autoneg_advertised |= ADVERTISE_1000_FULL; + } + break; + + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + hw->autoneg_advertised = ADVERTISE_100_FULL; + break; + + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + hw->autoneg_advertised = ADVERTISE_100_HALF; + break; + + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + hw->autoneg_advertised = ADVERTISE_10_FULL; + break; + + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + hw->autoneg_advertised = ADVERTISE_10_HALF; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + + ret_val = atl1e_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) { + ret_val = atl1e_write_phy_reg(hw, MII_AT001_CR, + mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } + + return 0; +} + + +/* + * Resets the PHY and make all config validate + * + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII control regiser (for F001 bug) + */ +int atl1e_phy_commit(struct atl1e_hw *hw) +{ + struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret_val; + u16 phy_data; + + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG; + + ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /************************************** + * pcie serdes link may be down ! + **************************************/ + for (i = 0; i < 25; i++) { + msleep(1); + val = AT_READ_REG(hw, REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (0 != (val & (MDIO_START | MDIO_BUSY))) { + dev_err(&pdev->dev, + "pcie linkdown at least for 25ms\n"); + return ret_val; + } + + dev_err(&pdev->dev, "pcie linkup after %d ms\n", i); + } + return 0; +} + +int atl1e_phy_init(struct atl1e_hw *hw) +{ + struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + s32 ret_val; + u16 phy_val; + + if (hw->phy_configured) { + if (hw->re_autoneg) { + hw->re_autoneg = false; + return atl1e_restart_autoneg(hw); + } + return 0; + } + + /* RESET GPHY Core */ + AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT); + msleep(2); + AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT | + GPHY_CTRL_EXT_RESET); + msleep(2); + + /* patches */ + /* p1. eable hibernation mode */ + ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0xB); + if (ret_val) + return ret_val; + ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0xBC00); + if (ret_val) + return ret_val; + /* p2. set Class A/B for all modes */ + ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0); + if (ret_val) + return ret_val; + phy_val = 0x02ef; + /* remove Class AB */ + /* phy_val = hw->emi_ca ? 0x02ef : 0x02df; */ + ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, phy_val); + if (ret_val) + return ret_val; + /* p3. 10B ??? */ + ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x12); + if (ret_val) + return ret_val; + ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x4C04); + if (ret_val) + return ret_val; + /* p4. 1000T power */ + ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x4); + if (ret_val) + return ret_val; + ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x8BBB); + if (ret_val) + return ret_val; + + ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x5); + if (ret_val) + return ret_val; + ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x2C46); + if (ret_val) + return ret_val; + + msleep(1); + + /*Enable PHY LinkChange Interrupt */ + ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00); + if (ret_val) { + dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n"); + return ret_val; + } + /* setup AutoNeg parameters */ + ret_val = atl1e_phy_setup_autoneg_adv(hw); + if (ret_val) { + dev_err(&pdev->dev, "Error Setting up Auto-Negotiation\n"); + return ret_val; + } + /* SW.Reset & En-Auto-Neg to restart Auto-Neg*/ + dev_dbg(&pdev->dev, "Restarting Auto-Neg"); + ret_val = atl1e_phy_commit(hw); + if (ret_val) { + dev_err(&pdev->dev, "Error Resetting the phy"); + return ret_val; + } + + hw->phy_configured = true; + + return 0; +} + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +int atl1e_reset_hw(struct atl1e_hw *hw) +{ + struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + + u32 idle_status_data = 0; + u16 pci_cfg_cmd_word = 0; + int timeout = 0; + + /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */ + pci_read_config_word(pdev, PCI_REG_COMMAND, &pci_cfg_cmd_word); + if ((pci_cfg_cmd_word & (CMD_IO_SPACE | + CMD_MEMORY_SPACE | CMD_BUS_MASTER)) + != (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER)) { + pci_cfg_cmd_word |= (CMD_IO_SPACE | + CMD_MEMORY_SPACE | CMD_BUS_MASTER); + pci_write_config_word(pdev, PCI_REG_COMMAND, pci_cfg_cmd_word); + } + + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + AT_WRITE_REG(hw, REG_MASTER_CTRL, + MASTER_CTRL_LED_MODE | MASTER_CTRL_SOFT_RST); + wmb(); + msleep(1); + + /* Wait at least 10ms for All module to be Idle */ + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + idle_status_data = AT_READ_REG(hw, REG_IDLE_STATUS); + if (idle_status_data == 0) + break; + msleep(1); + cpu_relax(); + } + + if (timeout >= AT_HW_MAX_IDLE_DELAY) { + dev_err(&pdev->dev, + "MAC state machine cann't be idle since" + " disabled for 10ms second\n"); + return AT_ERR_TIMEOUT; + } + + return 0; +} + + +/* + * Performs basic configuration of the adapter. + * + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +int atl1e_init_hw(struct atl1e_hw *hw) +{ + s32 ret_val = 0; + + atl1e_init_pcie(hw); + + /* Zero out the Multicast HASH table */ + /* clear the old settings from the multicast hash table */ + AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + ret_val = atl1e_phy_init(hw); + + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +int atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex) +{ + int err; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + err = atl1e_read_phy_reg(hw, MII_AT001_PSSR, &phy_data); + if (err) + return err; + + if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED)) + return AT_ERR_PHY_RES; + + switch (phy_data & MII_AT001_PSSR_SPEED) { + case MII_AT001_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_AT001_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_AT001_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return AT_ERR_PHY_SPEED; + break; + } + + if (phy_data & MII_AT001_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +int atl1e_restart_autoneg(struct atl1e_hw *hw) +{ + int err = 0; + + err = atl1e_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg); + if (err) + return err; + + if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) { + err = atl1e_write_phy_reg(hw, MII_AT001_CR, + hw->mii_1000t_ctrl_reg); + if (err) + return err; + } + + err = atl1e_write_phy_reg(hw, MII_BMCR, + MII_CR_RESET | MII_CR_AUTO_NEG_EN | + MII_CR_RESTART_AUTO_NEG); + return err; +} + diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/atl1e/atl1e_hw.h new file mode 100644 index 000000000000..5ea2f4d86cfa --- /dev/null +++ b/drivers/net/atl1e/atl1e_hw.h @@ -0,0 +1,793 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATHL1E_HW_H_ +#define _ATHL1E_HW_H_ + +#include +#include + +struct atl1e_adapter; +struct atl1e_hw; + +/* function prototype */ +s32 atl1e_reset_hw(struct atl1e_hw *hw); +s32 atl1e_read_mac_addr(struct atl1e_hw *hw); +s32 atl1e_init_hw(struct atl1e_hw *hw); +s32 atl1e_phy_commit(struct atl1e_hw *hw); +s32 atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex); +u32 atl1e_auto_get_fc(struct atl1e_adapter *adapter, u16 duplex); +u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr); +void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value); +s32 atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data); +s32 atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data); +s32 atl1e_validate_mdi_setting(struct atl1e_hw *hw); +void atl1e_hw_set_mac_addr(struct atl1e_hw *hw); +bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value); +bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value); +s32 atl1e_phy_enter_power_saving(struct atl1e_hw *hw); +s32 atl1e_phy_leave_power_saving(struct atl1e_hw *hw); +s32 atl1e_phy_init(struct atl1e_hw *hw); +int atl1e_check_eeprom_exist(struct atl1e_hw *hw); +void atl1e_force_ps(struct atl1e_hw *hw); +s32 atl1e_restart_autoneg(struct atl1e_hw *hw); + +/* register definition */ +#define REG_PM_CTRLSTAT 0x44 + +#define REG_PCIE_CAP_LIST 0x58 + +#define REG_DEVICE_CAP 0x5C +#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 + +#define REG_DEVICE_CTRL 0x60 +#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 +#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 +#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xff +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_SPI_FLASH_CTRL 0x200 +#define SPI_FLASH_CTRL_STS_NON_RDY 0x1 +#define SPI_FLASH_CTRL_STS_WEN 0x2 +#define SPI_FLASH_CTRL_STS_WPEN 0x80 +#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF +#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0 +#define SPI_FLASH_CTRL_INS_MASK 0x7 +#define SPI_FLASH_CTRL_INS_SHIFT 8 +#define SPI_FLASH_CTRL_START 0x800 +#define SPI_FLASH_CTRL_EN_VPD 0x2000 +#define SPI_FLASH_CTRL_LDSTART 0x8000 +#define SPI_FLASH_CTRL_CS_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HI_SHIFT 16 +#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3 +#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18 +#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20 +#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3 +#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22 +#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3 +#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24 +#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3 +#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26 +#define SPI_FLASH_CTRL_WAIT_READY 0x10000000 + +#define REG_SPI_ADDR 0x204 + +#define REG_SPI_DATA 0x208 + +#define REG_SPI_FLASH_CONFIG 0x20C +#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF +#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0 +#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3 +#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24 +#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000 + + +#define REG_SPI_FLASH_OP_PROGRAM 0x210 +#define REG_SPI_FLASH_OP_SC_ERASE 0x211 +#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212 +#define REG_SPI_FLASH_OP_RDID 0x213 +#define REG_SPI_FLASH_OP_WREN 0x214 +#define REG_SPI_FLASH_OP_RDSR 0x215 +#define REG_SPI_FLASH_OP_WRSR 0x216 +#define REG_SPI_FLASH_OP_READ 0x217 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10 + +#define REG_PCIE_PHYMISC 0x1000 +#define PCIE_PHYMISC_FORCE_RCV_DET 0x4 + +#define REG_LTSSM_TEST_MODE 0x12FC +#define LTSSM_TEST_MODE_DEF 0xE000 + +/* Selene Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_MTIMER_EN 0x2 +#define MASTER_CTRL_ITIMER_EN 0x4 +#define MASTER_CTRL_MANUAL_INT 0x8 +#define MASTER_CTRL_ITIMER2_EN 0x20 +#define MASTER_CTRL_INT_RDCLR 0x40 +#define MASTER_CTRL_LED_MODE 0x200 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xff +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0xff + +/* Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + + +/* IRQ ModeratorTimer Initial Value Register */ +#define REG_IRQ_MODU_TIMER_INIT 0x1408 /* w */ +#define REG_IRQ_MODU_TIMER2_INIT 0x140A /* w */ + + +#define REG_GPHY_CTRL 0x140C +#define GPHY_CTRL_EXT_RESET 1 +#define GPHY_CTRL_PIPE_MOD 2 +#define GPHY_CTRL_TEST_MODE_MASK 3 +#define GPHY_CTRL_TEST_MODE_SHIFT 2 +#define GPHY_CTRL_BERT_START 0x10 +#define GPHY_CTRL_GATE_25M_EN 0x20 +#define GPHY_CTRL_LPW_EXIT 0x40 +#define GPHY_CTRL_PHY_IDDQ 0x80 +#define GPHY_CTRL_PHY_IDDQ_DIS 0x100 +#define GPHY_CTRL_PCLK_SEL_DIS 0x200 +#define GPHY_CTRL_HIB_EN 0x400 +#define GPHY_CTRL_HIB_PULSE 0x800 +#define GPHY_CTRL_SEL_ANA_RST 0x1000 +#define GPHY_CTRL_PHY_PLL_ON 0x2000 +#define GPHY_CTRL_PWDOWN_HW 0x4000 +#define GPHY_CTRL_DEFAULT (\ + GPHY_CTRL_PHY_PLL_ON |\ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN) + +#define GPHY_CTRL_PW_WOL_DIS (\ + GPHY_CTRL_PHY_PLL_ON |\ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN |\ + GPHY_CTRL_PWDOWN_HW |\ + GPHY_CTRL_PCLK_SEL_DIS |\ + GPHY_CTRL_PHY_IDDQ) + +/* IRQ Anti-Lost Timer Initial Value Register */ +#define REG_CMBDISDMA_TIMER 0x140E + + +/* Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 +#define IDLE_STATUS_RXMAC 1 /* 1: RXMAC state machine is in non-IDLE state. 0: RXMAC is idling */ +#define IDLE_STATUS_TXMAC 2 /* 1: TXMAC state machine is in non-IDLE state. 0: TXMAC is idling */ +#define IDLE_STATUS_RXQ 4 /* 1: RXQ state machine is in non-IDLE state. 0: RXQ is idling */ +#define IDLE_STATUS_TXQ 8 /* 1: TXQ state machine is in non-IDLE state. 0: TXQ is idling */ +#define IDLE_STATUS_DMAR 0x10 /* 1: DMAR state machine is in non-IDLE state. 0: DMAR is idling */ +#define IDLE_STATUS_DMAW 0x20 /* 1: DMAW state machine is in non-IDLE state. 0: DMAW is idling */ +#define IDLE_STATUS_SMB 0x40 /* 1: SMB state machine is in non-IDLE state. 0: SMB is idling */ +#define IDLE_STATUS_CMB 0x80 /* 1: CMB state machine is in non-IDLE state. 0: CMB is idling */ + +/* MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit control data to write to PHY MII management register */ +#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit status data that was read from the PHY MII management register*/ +#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */ +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 /* 1: read, 0: write */ +#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */ +#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO master. And this bit is self cleared after one cycle*/ +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 +#define MDIO_AP_EN 0x10000000 +#define MDIO_WAIT_TIMES 10 + +/* MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 +#define PHY_STATUS_100M 0x20000 +#define PHY_STATUS_EMI_CA 0x40000 + +/* BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141c +#define BIST0_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */ +/* BIST process and reset to zero when BIST is done */ +#define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */ +/* decoder failure or more than 1 cell stuck-to-x failure */ +#define BIST0_FUSE_FLAG 0x4 /* 1: Indicating one cell has been fixed */ + +/* BIST Control and Status Register1(for the retry buffer of PCI Express) */ +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */ +/* BIST process and reset to zero when BIST is done */ +#define BIST1_SRAM_FAIL 0x2 /* 1: The SRAM failure is un-repairable because it has address */ +/* decoder failure or more than 1 cell stuck-to-x failure.*/ +#define BIST1_FUSE_FLAG 0x4 + +/* SerDes Lock Detect Control and Status Register */ +#define REG_SERDES_LOCK 0x1424 +#define SERDES_LOCK_DETECT 1 /* 1: SerDes lock detected . This signal comes from Analog SerDes */ +#define SERDES_LOCK_DETECT_EN 2 /* 1: Enable SerDes Lock detect function */ + +/* MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 1 /* 1: Transmit Enable */ +#define MAC_CTRL_RX_EN 2 /* 1: Receive Enable */ +#define MAC_CTRL_TX_FLOW 4 /* 1: Transmit Flow Control Enable */ +#define MAC_CTRL_RX_FLOW 8 /* 1: Receive Flow Control Enable */ +#define MAC_CTRL_LOOPBACK 0x10 /* 1: Loop back at G/MII Interface */ +#define MAC_CTRL_DUPLX 0x20 /* 1: Full-duplex mode 0: Half-duplex mode */ +#define MAC_CTRL_ADD_CRC 0x40 /* 1: Instruct MAC to attach CRC on all egress Ethernet frames */ +#define MAC_CTRL_PAD 0x80 /* 1: Instruct MAC to pad short frames to 60-bytes, and then attach CRC. This bit has higher priority over CRC_EN */ +#define MAC_CTRL_LENCHK 0x100 /* 1: Instruct MAC to check if length field matches the real packet length */ +#define MAC_CTRL_HUGE_EN 0x200 /* 1: receive Jumbo frame enable */ +#define MAC_CTRL_PRMLEN_SHIFT 10 /* Preamble length */ +#define MAC_CTRL_PRMLEN_MASK 0xf +#define MAC_CTRL_RMV_VLAN 0x4000 /* 1: to remove VLAN Tag automatically from all receive packets */ +#define MAC_CTRL_PROMIS_EN 0x8000 /* 1: Promiscuous Mode Enable */ +#define MAC_CTRL_TX_PAUSE 0x10000 /* 1: transmit test pause */ +#define MAC_CTRL_SCNT 0x20000 /* 1: shortcut slot time counter */ +#define MAC_CTRL_SRST_TX 0x40000 /* 1: synchronized reset Transmit MAC module */ +#define MAC_CTRL_TX_SIMURST 0x80000 /* 1: transmit simulation reset */ +#define MAC_CTRL_SPEED_SHIFT 20 /* 10: gigabit 01:10M/100M */ +#define MAC_CTRL_SPEED_MASK 0x300000 +#define MAC_CTRL_SPEED_1000 2 +#define MAC_CTRL_SPEED_10_100 1 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 /* 1: transmit maximum backoff (half-duplex test bit) */ +#define MAC_CTRL_TX_HUGE 0x800000 /* 1: transmit huge enable */ +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 /* 1: RX checksum enable */ +#define MAC_CTRL_MC_ALL_EN 0x2000000 /* 1: upload all multicast frame without error to system */ +#define MAC_CTRL_BC_EN 0x4000000 /* 1: upload all broadcast frame without error to system */ +#define MAC_CTRL_DBG 0x8000000 /* 1: upload all received frame to system (Debug Mode) */ + +/* MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back inter-packet gap. The default is 96-bit time */ +#define MAC_IPG_IFG_IPGT_MASK 0x7f +#define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to enforce in between RX frames */ +#define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ +#define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ +#define MAC_IPG_IFG_IPGR1_MASK 0x7f +#define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ +#define MAC_IPG_IFG_IPGR2_MASK 0x7f + +/* MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/* Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + + +/* MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 /* Retransmission maximum, afterwards the packet will be discarded */ +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 /* 1: Allow the transmission of a packet which has been excessively deferred */ +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 /* 1: No back-off on collision, immediately start the retransmission */ +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* 1: No back-off on backpressure, immediately start the transmission after back pressure */ +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ + +/* Maximum Frame Length Control Register */ +#define REG_MTU 0x149c + +/* Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14a0 +#define WOL_PATTERN_EN 0x00000001 +#define WOL_PATTERN_PME_EN 0x00000002 +#define WOL_MAGIC_EN 0x00000004 +#define WOL_MAGIC_PME_EN 0x00000008 +#define WOL_LINK_CHG_EN 0x00000010 +#define WOL_LINK_CHG_PME_EN 0x00000020 +#define WOL_PATTERN_ST 0x00000100 +#define WOL_MAGIC_ST 0x00000200 +#define WOL_LINKCHG_ST 0x00000400 +#define WOL_CLK_SWITCH_EN 0x00008000 +#define WOL_PT0_EN 0x00010000 +#define WOL_PT1_EN 0x00020000 +#define WOL_PT2_EN 0x00040000 +#define WOL_PT3_EN 0x00080000 +#define WOL_PT4_EN 0x00100000 +#define WOL_PT5_EN 0x00200000 +#define WOL_PT6_EN 0x00400000 +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14a4 +#define WOL_PT_LEN_MASK 0x7f +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Register */ +#define REG_SRAM_TRD_ADDR 0x1518 +#define REG_SRAM_TRD_LEN 0x151C +#define REG_SRAM_RXF_ADDR 0x1520 +#define REG_SRAM_RXF_LEN 0x1524 +#define REG_SRAM_TXF_ADDR 0x1528 +#define REG_SRAM_TXF_LEN 0x152C +#define REG_SRAM_TCPH_ADDR 0x1530 +#define REG_SRAM_PKTH_ADDR 0x1532 + +/* Load Ptr Register */ +#define REG_LOAD_PTR 0x1534 /* Software sets this bit after the initialization of the head and tail */ + +/* + * addresses of all descriptors, as well as the following descriptor + * control register, which triggers each function block to load the head + * pointer to prepare for the operation. This bit is then self-cleared + * after one cycle. + */ + +/* Descriptor Control register */ +#define REG_RXF3_BASE_ADDR_HI 0x153C +#define REG_DESC_BASE_ADDR_HI 0x1540 +#define REG_RXF0_BASE_ADDR_HI 0x1540 /* share with DESC BASE ADDR HI */ +#define REG_HOST_RXF0_PAGE0_LO 0x1544 +#define REG_HOST_RXF0_PAGE1_LO 0x1548 +#define REG_TPD_BASE_ADDR_LO 0x154C +#define REG_RXF1_BASE_ADDR_HI 0x1550 +#define REG_RXF2_BASE_ADDR_HI 0x1554 +#define REG_HOST_RXFPAGE_SIZE 0x1558 +#define REG_TPD_RING_SIZE 0x155C +/* RSS about */ +#define REG_RSS_KEY0 0x14B0 +#define REG_RSS_KEY1 0x14B4 +#define REG_RSS_KEY2 0x14B8 +#define REG_RSS_KEY3 0x14BC +#define REG_RSS_KEY4 0x14C0 +#define REG_RSS_KEY5 0x14C4 +#define REG_RSS_KEY6 0x14C8 +#define REG_RSS_KEY7 0x14CC +#define REG_RSS_KEY8 0x14D0 +#define REG_RSS_KEY9 0x14D4 +#define REG_IDT_TABLE4 0x14E0 +#define REG_IDT_TABLE5 0x14E4 +#define REG_IDT_TABLE6 0x14E8 +#define REG_IDT_TABLE7 0x14EC +#define REG_IDT_TABLE0 0x1560 +#define REG_IDT_TABLE1 0x1564 +#define REG_IDT_TABLE2 0x1568 +#define REG_IDT_TABLE3 0x156C +#define REG_IDT_TABLE REG_IDT_TABLE0 +#define REG_RSS_HASH_VALUE 0x1570 +#define REG_RSS_HASH_FLAG 0x1574 +#define REG_BASE_CPU_NUMBER 0x157C + + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1580 +#define TXQ_CTRL_NUM_TPD_BURST_MASK 0xF +#define TXQ_CTRL_NUM_TPD_BURST_SHIFT 0 +#define TXQ_CTRL_EN 0x20 /* 1: Enable TXQ */ +#define TXQ_CTRL_ENH_MODE 0x40 /* Performance enhancement mode, in which up to two back-to-back DMA read commands might be dispatched. */ +#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */ +#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_EARLY_TH 0x1584 /* Jumbo frame threshold in QWORD unit. Packet greater than */ +/* JUMBO_TASK_OFFLOAD_THRESHOLD will not be task offloaded. */ +#define TX_TX_EARLY_TH_MASK 0x7ff +#define TX_TX_EARLY_TH_SHIFT 0 + + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15A0 +#define RXQ_CTRL_PBA_ALIGN_32 0 /* rx-packet alignment */ +#define RXQ_CTRL_PBA_ALIGN_64 1 +#define RXQ_CTRL_PBA_ALIGN_128 2 +#define RXQ_CTRL_PBA_ALIGN_256 3 +#define RXQ_CTRL_Q1_EN 0x10 +#define RXQ_CTRL_Q2_EN 0x20 +#define RXQ_CTRL_Q3_EN 0x40 +#define RXQ_CTRL_IPV6_XSUM_VERIFY_EN 0x80 +#define RXQ_CTRL_HASH_TLEN_SHIFT 8 +#define RXQ_CTRL_HASH_TLEN_MASK 0xFF +#define RXQ_CTRL_HASH_TYPE_IPV4 0x10000 +#define RXQ_CTRL_HASH_TYPE_IPV4_TCP 0x20000 +#define RXQ_CTRL_HASH_TYPE_IPV6 0x40000 +#define RXQ_CTRL_HASH_TYPE_IPV6_TCP 0x80000 +#define RXQ_CTRL_RSS_MODE_DISABLE 0 +#define RXQ_CTRL_RSS_MODE_SQSINT 0x4000000 +#define RXQ_CTRL_RSS_MODE_MQUESINT 0x8000000 +#define RXQ_CTRL_RSS_MODE_MQUEMINT 0xC000000 +#define RXQ_CTRL_NIP_QUEUE_SEL_TBL 0x10000000 +#define RXQ_CTRL_HASH_ENABLE 0x20000000 +#define RXQ_CTRL_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +/* Rx jumbo packet threshold and rrd retirement timer */ +#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4 +/* + * Jumbo packet threshold for non-VLAN packet, in QWORD (64-bit) unit. + * When the packet length greater than or equal to this value, RXQ + * shall start cut-through forwarding of the received packet. + */ +#define RXQ_JMBOSZ_TH_MASK 0x7ff +#define RXQ_JMBOSZ_TH_SHIFT 0 /* RRD retirement timer. Decrement by 1 after every 512ns passes*/ +#define RXQ_JMBO_LKAH_MASK 0xf +#define RXQ_JMBO_LKAH_SHIFT 11 + +/* RXF flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff + + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15C0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAR_REQ_PRI 0x400 +#define DMA_CTRL_DMAR_DLY_CNT_MASK 0x1F +#define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11 +#define DMA_CTRL_DMAW_DLY_CNT_MASK 0xF +#define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16 +#define DMA_CTRL_TXCMB_EN 0x100000 +#define DMA_CTRL_RXCMB_EN 0x200000 + + +/* CMB/SMB Control Register */ +#define REG_SMB_STAT_TIMER 0x15C4 +#define REG_TRIG_RRD_THRESH 0x15CA +#define REG_TRIG_TPD_THRESH 0x15C8 +#define REG_TRIG_TXTIMER 0x15CC +#define REG_TRIG_RXTIMER 0x15CE + +/* HOST RXF Page 1,2,3 address */ +#define REG_HOST_RXF1_PAGE0_LO 0x15D0 +#define REG_HOST_RXF1_PAGE1_LO 0x15D4 +#define REG_HOST_RXF2_PAGE0_LO 0x15D8 +#define REG_HOST_RXF2_PAGE1_LO 0x15DC +#define REG_HOST_RXF3_PAGE0_LO 0x15E0 +#define REG_HOST_RXF3_PAGE1_LO 0x15E4 + +/* Mail box */ +#define REG_MB_RXF1_RADDR 0x15B4 +#define REG_MB_RXF2_RADDR 0x15B8 +#define REG_MB_RXF3_RADDR 0x15BC +#define REG_MB_TPD_PROD_IDX 0x15F0 + +/* RXF-Page 0-3 PageNo & Valid bit */ +#define REG_HOST_RXF0_PAGE0_VLD 0x15F4 +#define HOST_RXF_VALID 1 +#define HOST_RXF_PAGENO_SHIFT 1 +#define HOST_RXF_PAGENO_MASK 0x7F +#define REG_HOST_RXF0_PAGE1_VLD 0x15F5 +#define REG_HOST_RXF1_PAGE0_VLD 0x15F6 +#define REG_HOST_RXF1_PAGE1_VLD 0x15F7 +#define REG_HOST_RXF2_PAGE0_VLD 0x15F8 +#define REG_HOST_RXF2_PAGE1_VLD 0x15F9 +#define REG_HOST_RXF3_PAGE0_VLD 0x15FA +#define REG_HOST_RXF3_PAGE1_VLD 0x15FB + +/* Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_SMB 1 +#define ISR_TIMER 2 /* Interrupt when Timer is counted down to zero */ +/* + * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set + * in Table 51 Selene Master Control Register (Offset 0x1400). + */ +#define ISR_MANUAL 4 +#define ISR_HW_RXF_OV 8 /* RXF overflow interrupt */ +#define ISR_HOST_RXF0_OV 0x10 +#define ISR_HOST_RXF1_OV 0x20 +#define ISR_HOST_RXF2_OV 0x40 +#define ISR_HOST_RXF3_OV 0x80 +#define ISR_TXF_UN 0x100 +#define ISR_RX0_PAGE_FULL 0x200 +#define ISR_DMAR_TO_RST 0x400 +#define ISR_DMAW_TO_RST 0x800 +#define ISR_GPHY 0x1000 +#define ISR_TX_CREDIT 0x2000 +#define ISR_GPHY_LPW 0x4000 /* GPHY low power state interrupt */ +#define ISR_RX_PKT 0x10000 /* One packet received, triggered by RFD */ +#define ISR_TX_PKT 0x20000 /* One packet transmitted, triggered by TPD */ +#define ISR_TX_DMA 0x40000 +#define ISR_RX_PKT_1 0x80000 +#define ISR_RX_PKT_2 0x100000 +#define ISR_RX_PKT_3 0x200000 +#define ISR_MAC_RX 0x400000 +#define ISR_MAC_TX 0x800000 +#define ISR_UR_DETECTED 0x1000000 +#define ISR_FERR_DETECTED 0x2000000 +#define ISR_NFERR_DETECTED 0x4000000 +#define ISR_CERR_DETECTED 0x8000000 +#define ISR_PHY_LINKDOWN 0x10000000 +#define ISR_DIS_INT 0x80000000 + + +/* Interrupt Mask Register */ +#define REG_IMR 0x1604 + + +#define IMR_NORMAL_MASK (\ + ISR_SMB |\ + ISR_TXF_UN |\ + ISR_HW_RXF_OV |\ + ISR_HOST_RXF0_OV|\ + ISR_MANUAL |\ + ISR_GPHY |\ + ISR_GPHY_LPW |\ + ISR_DMAR_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_PHY_LINKDOWN|\ + ISR_RX_PKT |\ + ISR_TX_PKT) + +#define ISR_TX_EVENT (ISR_TXF_UN | ISR_TX_PKT) +#define ISR_RX_EVENT (ISR_HOST_RXF0_OV | ISR_HW_RXF_OV | ISR_RX_PKT) + +#define REG_MAC_RX_STATUS_BIN 0x1700 +#define REG_MAC_RX_STATUS_END 0x175c +#define REG_MAC_TX_STATUS_BIN 0x1760 +#define REG_MAC_TX_STATUS_END 0x17c0 + +/* Hardware Offset Register */ +#define REG_HOST_RXF0_PAGEOFF 0x1800 +#define REG_TPD_CONS_IDX 0x1804 +#define REG_HOST_RXF1_PAGEOFF 0x1808 +#define REG_HOST_RXF2_PAGEOFF 0x180C +#define REG_HOST_RXF3_PAGEOFF 0x1810 + +/* RXF-Page 0-3 Offset DMA Address */ +#define REG_HOST_RXF0_MB0_LO 0x1820 +#define REG_HOST_RXF0_MB1_LO 0x1824 +#define REG_HOST_RXF1_MB0_LO 0x1828 +#define REG_HOST_RXF1_MB1_LO 0x182C +#define REG_HOST_RXF2_MB0_LO 0x1830 +#define REG_HOST_RXF2_MB1_LO 0x1834 +#define REG_HOST_RXF3_MB0_LO 0x1838 +#define REG_HOST_RXF3_MB1_LO 0x183C + +/* Tpd CMB DMA Address */ +#define REG_HOST_TX_CMB_LO 0x1840 +#define REG_HOST_SMB_ADDR_LO 0x1844 + +/* DEBUG ADDR */ +#define REG_DEBUG_DATA0 0x1900 +#define REG_DEBUG_DATA1 0x1904 + +/***************************** MII definition ***************************************/ +/* PHY Common Register */ +#define MII_BMCR 0x00 +#define MII_BMSR 0x01 +#define MII_PHYSID1 0x02 +#define MII_PHYSID2 0x03 +#define MII_ADVERTISE 0x04 +#define MII_LPA 0x05 +#define MII_EXPANSION 0x06 +#define MII_AT001_CR 0x09 +#define MII_AT001_SR 0x0A +#define MII_AT001_ESR 0x0F +#define MII_AT001_PSCR 0x10 +#define MII_AT001_PSSR 0x11 +#define MII_INT_CTRL 0x12 +#define MII_INT_STATUS 0x13 +#define MII_SMARTSPEED 0x14 +#define MII_RERRCOUNTER 0x15 +#define MII_SREVISION 0x16 +#define MII_RESV1 0x17 +#define MII_LBRERROR 0x18 +#define MII_PHYADDR 0x19 +#define MII_RESV2 0x1a +#define MII_TPISTATUS 0x1b +#define MII_NCONFIG 0x1c + +#define MII_DBG_ADDR 0x1D +#define MII_DBG_DATA 0x1E + + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_MASK 0x2040 +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Link partner ability register. */ +#define MII_LPA_SLCT 0x001f /* Same as advertise selector */ +#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */ +#define MII_LPA_PAUSE 0x0400 /* PAUSE */ +#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */ +#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */ +#define MII_LPA_LPACK 0x4000 /* Link partner acked us */ +#define MII_LPA_NPAGE 0x8000 /* Next page bit */ + +/* Autoneg Advertisement Register */ +#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define MII_AR_PAUSE 0x0400 /* Pause operation desired */ +#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define MII_AR_SPEED_MASK 0x01E0 +#define MII_AR_DEFAULT_CAP_MASK 0x0DE0 + +/* 1000BASE-T Control Register */ +#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ +/* 0=DTE device */ +#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ +/* 0=Configure PHY as Slave */ +#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ +/* 0=Automatic Master/Slave config */ +#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define MII_AT001_CR_1000T_SPEED_MASK 0x0300 +#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300 + +/* 1000BASE-T Status Register */ +#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13 + +/* Extended Status Register */ +#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +/* AT001 PHY Specific Control Register */ +#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ +#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008 +#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, + * 0=CLK125 toggling + */ +#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ +/* Manual MDI configuration */ +#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, + * 100BASE-TX/10BASE-T: + * MDI Mode + */ +#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled + * all speeds. + */ +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 +/* 1=Enable Extended 10BASE-T distance + * (Lower 10BASE-T RX Threshold) + * 0=Normal 10BASE-T RX Threshold */ +#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 +/* 1=5-Bit interface in 100BASE-TX + * 0=MII interface in 100BASE-TX */ +#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ +#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1 +#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5 +#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 +/* AT001 PHY Specific Status Register */ +#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#endif /*_ATHL1E_HW_H_*/ diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c new file mode 100644 index 000000000000..367c72750635 --- /dev/null +++ b/drivers/net/atl1e/atl1e_main.c @@ -0,0 +1,2599 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "atl1e.h" + +#define DRV_VERSION "1.0.0.7-NAPI" + +char atl1e_driver_name[] = "ATL1E"; +char atl1e_driver_version[] = DRV_VERSION; +#define PCI_DEVICE_ID_ATTANSIC_L1E 0x1026 +/* + * atl1e_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static struct pci_device_id atl1e_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, + /* required last entry */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, atl1e_pci_tbl); + +MODULE_AUTHOR("Atheros Corporation, , Jie Yang "); +MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter); + +static const u16 +atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = +{ + {REG_HOST_RXF0_PAGE0_VLD, REG_HOST_RXF0_PAGE1_VLD}, + {REG_HOST_RXF1_PAGE0_VLD, REG_HOST_RXF1_PAGE1_VLD}, + {REG_HOST_RXF2_PAGE0_VLD, REG_HOST_RXF2_PAGE1_VLD}, + {REG_HOST_RXF3_PAGE0_VLD, REG_HOST_RXF3_PAGE1_VLD} +}; + +static const u16 atl1e_rx_page_hi_addr_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_RXF0_BASE_ADDR_HI, + REG_RXF1_BASE_ADDR_HI, + REG_RXF2_BASE_ADDR_HI, + REG_RXF3_BASE_ADDR_HI +}; + +static const u16 +atl1e_rx_page_lo_addr_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = +{ + {REG_HOST_RXF0_PAGE0_LO, REG_HOST_RXF0_PAGE1_LO}, + {REG_HOST_RXF1_PAGE0_LO, REG_HOST_RXF1_PAGE1_LO}, + {REG_HOST_RXF2_PAGE0_LO, REG_HOST_RXF2_PAGE1_LO}, + {REG_HOST_RXF3_PAGE0_LO, REG_HOST_RXF3_PAGE1_LO} +}; + +static const u16 +atl1e_rx_page_write_offset_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] = +{ + {REG_HOST_RXF0_MB0_LO, REG_HOST_RXF0_MB1_LO}, + {REG_HOST_RXF1_MB0_LO, REG_HOST_RXF1_MB1_LO}, + {REG_HOST_RXF2_MB0_LO, REG_HOST_RXF2_MB1_LO}, + {REG_HOST_RXF3_MB0_LO, REG_HOST_RXF3_MB1_LO} +}; + +static const u16 atl1e_pay_load_size[] = { + 128, 256, 512, 1024, 2048, 4096, +}; + +/* + * atl1e_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static inline void atl1e_irq_enable(struct atl1e_adapter *adapter) +{ + if (likely(atomic_dec_and_test(&adapter->irq_sem))) { + AT_WRITE_REG(&adapter->hw, REG_ISR, 0); + AT_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK); + AT_WRITE_FLUSH(&adapter->hw); + } +} + +/* + * atl1e_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static inline void atl1e_irq_disable(struct atl1e_adapter *adapter) +{ + atomic_inc(&adapter->irq_sem); + AT_WRITE_REG(&adapter->hw, REG_IMR, 0); + AT_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +/* + * atl1e_irq_reset - reset interrupt confiure on the NIC + * @adapter: board private structure + */ +static inline void atl1e_irq_reset(struct atl1e_adapter *adapter) +{ + atomic_set(&adapter->irq_sem, 0); + AT_WRITE_REG(&adapter->hw, REG_ISR, 0); + AT_WRITE_REG(&adapter->hw, REG_IMR, 0); + AT_WRITE_FLUSH(&adapter->hw); +} + +/* + * atl1e_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1e_phy_config(unsigned long data) +{ + struct atl1e_adapter *adapter = (struct atl1e_adapter *) data; + struct atl1e_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + atl1e_restart_autoneg(hw); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); +} + +void atl1e_reinit_locked(struct atl1e_adapter *adapter) +{ + + WARN_ON(in_interrupt()); + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + atl1e_down(adapter); + atl1e_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); +} + +static void atl1e_reset_task(struct work_struct *work) +{ + struct atl1e_adapter *adapter; + adapter = container_of(work, struct atl1e_adapter, reset_task); + + atl1e_reinit_locked(adapter); +} + +static int atl1e_check_link(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + int err = 0; + u16 speed, duplex, phy_data; + + /* MII_BMSR must read twise */ + atl1e_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1e_read_phy_reg(hw, MII_BMSR, &phy_data); + if ((phy_data & BMSR_LSTATUS) == 0) { + /* link down */ + if (netif_carrier_ok(netdev)) { /* old link state: Up */ + u32 value; + /* disable rx */ + value = AT_READ_REG(hw, REG_MAC_CTRL); + value &= ~MAC_CTRL_RX_EN; + AT_WRITE_REG(hw, REG_MAC_CTRL, value); + adapter->link_speed = SPEED_0; + netif_carrier_off(netdev); + netif_stop_queue(netdev); + } + } else { + /* Link Up */ + err = atl1e_get_speed_and_duplex(hw, &speed, &duplex); + if (unlikely(err)) + return err; + + /* link result is our setting */ + if (adapter->link_speed != speed || + adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1e_setup_mac_ctrl(adapter); + dev_info(&pdev->dev, + "%s: %s NIC Link is Up<%d Mbps %s>\n", + atl1e_driver_name, netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex"); + } + + if (!netif_carrier_ok(netdev)) { + /* Link down -> Up */ + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } + } + return 0; +} + +/* + * atl1e_link_chg_task - deal with link change event Out of interrupt context + * @netdev: network interface device structure + */ +static void atl1e_link_chg_task(struct work_struct *work) +{ + struct atl1e_adapter *adapter; + unsigned long flags; + + adapter = container_of(work, struct atl1e_adapter, link_chg_task); + spin_lock_irqsave(&adapter->mdio_lock, flags); + atl1e_check_link(adapter); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); +} + +static void atl1e_link_chg_event(struct atl1e_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + u16 phy_data = 0; + u16 link_up = 0; + + spin_lock(&adapter->mdio_lock); + atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atl1e_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->mdio_lock); + link_up = phy_data & BMSR_LSTATUS; + /* notify upper layer link down ASAP */ + if (!link_up) { + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + dev_info(&pdev->dev, "%s: %s NIC Link is Down\n", + atl1e_driver_name, netdev->name); + adapter->link_speed = SPEED_0; + netif_stop_queue(netdev); + } + } + schedule_work(&adapter->link_chg_task); +} + +static void atl1e_del_timer(struct atl1e_adapter *adapter) +{ + del_timer_sync(&adapter->phy_config_timer); +} + +static void atl1e_cancel_work(struct atl1e_adapter *adapter) +{ + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->link_chg_task); +} + +/* + * atl1e_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atl1e_tx_timeout(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); +} + +/* + * atl1e_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atl1e_set_multi(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u32 mac_ctrl_data = 0; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + mac_ctrl_data = AT_READ_REG(hw, REG_MAC_CTRL); + + if (netdev->flags & IFF_PROMISC) { + mac_ctrl_data |= MAC_CTRL_PROMIS_EN; + } else if (netdev->flags & IFF_ALLMULTI) { + mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; + mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; + } else { + mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + } + + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + + /* clear the old settings from the multicast hash table */ + AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + /* comoute mc addresses' hash value ,and put it into hash table */ + for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { + hash_value = atl1e_hash_mc_addr(hw, mc_ptr->dmi_addr); + atl1e_hash_set(hw, hash_value); + } +} + +static void atl1e_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + u32 mac_ctrl_data = 0; + + dev_dbg(&pdev->dev, "atl1e_vlan_rx_register\n"); + + atl1e_irq_disable(adapter); + + adapter->vlgrp = grp; + mac_ctrl_data = AT_READ_REG(&adapter->hw, REG_MAC_CTRL); + + if (grp) { + /* enable VLAN tag insert/strip */ + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + } else { + /* disable VLAN tag insert/strip */ + mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; + } + + AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); + atl1e_irq_enable(adapter); +} + +static void atl1e_restore_vlan(struct atl1e_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + dev_dbg(&pdev->dev, "atl1e_restore_vlan !"); + atl1e_vlan_rx_register(adapter->netdev, adapter->vlgrp); +} +/* + * atl1e_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atl1e_set_mac_addr(struct net_device *netdev, void *p) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (netif_running(netdev)) + return -EBUSY; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atl1e_hw_set_mac_addr(&adapter->hw); + + return 0; +} + +/* + * atl1e_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1e_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + /* set MTU */ + if (old_mtu != new_mtu && netif_running(netdev)) { + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + netdev->mtu = new_mtu; + adapter->hw.max_frame_size = new_mtu; + adapter->hw.rx_jumbo_th = (max_frame + 7) >> 3; + atl1e_down(adapter); + atl1e_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); + } + return 0; +} + +/* + * caller should hold mdio_lock + */ +static int atl1e_mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1e_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result); + return result; +} + +static void atl1e_mdio_write(struct net_device *netdev, int phy_id, + int reg_num, int val) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + atl1e_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); +} + +/* + * atl1e_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1e_mii_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct mii_ioctl_data *data = if_mii(ifr); + unsigned long flags; + int retval = 0; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = 0; + break; + + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (atl1e_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) { + retval = -EIO; + goto out; + } + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (data->reg_num & ~(0x1F)) { + retval = -EFAULT; + goto out; + } + + dev_dbg(&pdev->dev, " write %x %x", + data->reg_num, data->val_in); + if (atl1e_write_phy_reg(&adapter->hw, + data->reg_num, data->val_in)) { + retval = -EIO; + goto out; + } + break; + + default: + retval = -EOPNOTSUPP; + break; + } +out: + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + return retval; + +} + +/* + * atl1e_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atl1e_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +static void atl1e_setup_pcicmd(struct pci_dev *pdev) +{ + u16 cmd; + + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_INTX_DISABLE | PCI_COMMAND_IO); + cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_write_config_word(pdev, PCI_COMMAND, cmd); + + /* + * some motherboards BIOS(PXE/EFI) driver may set PME + * while they transfer control to OS (Windows/Linux) + * so we should clear this bit before NIC work normally + */ + pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0); + msleep(1); +} + +/* + * atl1e_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + */ +static int __devinit atl1e_alloc_queues(struct atl1e_adapter *adapter) +{ + return 0; +} + +/* + * atl1e_sw_init - Initialize general software structures (struct atl1e_adapter) + * @adapter: board private structure to initialize + * + * atl1e_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1e_sw_init(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + u32 phy_status_data = 0; + + adapter->wol = 0; + adapter->link_speed = SPEED_0; /* hardware init */ + adapter->link_duplex = FULL_DUPLEX; + adapter->num_rx_queues = 1; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); + + phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS); + /* nic type */ + if (hw->revision_id >= 0xF0) { + hw->nic_type = athr_l2e_revB; + } else { + if (phy_status_data & PHY_STATUS_100M) + hw->nic_type = athr_l1e; + else + hw->nic_type = athr_l2e_revA; + } + + phy_status_data = AT_READ_REG(hw, REG_PHY_STATUS); + + if (phy_status_data & PHY_STATUS_EMI_CA) + hw->emi_ca = true; + else + hw->emi_ca = false; + + hw->phy_configured = false; + hw->preamble_len = 7; + hw->max_frame_size = adapter->netdev->mtu; + hw->rx_jumbo_th = (hw->max_frame_size + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN + 7) >> 3; + + hw->rrs_type = atl1e_rrs_disable; + hw->indirect_tab = 0; + hw->base_cpu = 0; + + /* need confirm */ + + hw->ict = 50000; /* 100ms */ + hw->smb_timer = 200000; /* 200ms */ + hw->tpd_burst = 5; + hw->rrd_thresh = 1; + hw->tpd_thresh = adapter->tx_ring.count / 2; + hw->rx_count_down = 4; /* 2us resolution */ + hw->tx_count_down = hw->imt * 4 / 3; + hw->dmar_block = atl1e_dma_req_1024; + hw->dmaw_block = atl1e_dma_req_1024; + hw->dmar_dly_cnt = 15; + hw->dmaw_dly_cnt = 4; + + if (atl1e_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + atomic_set(&adapter->irq_sem, 1); + spin_lock_init(&adapter->mdio_lock); + spin_lock_init(&adapter->tx_lock); + + set_bit(__AT_DOWN, &adapter->flags); + + return 0; +} + +/* + * atl1e_clean_tx_ring - Free Tx-skb + * @adapter: board private structure + */ +static void atl1e_clean_tx_ring(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = (struct atl1e_tx_ring *) + &adapter->tx_ring; + struct atl1e_tx_buffer *tx_buffer = NULL; + struct pci_dev *pdev = adapter->pdev; + u16 index, ring_count; + + if (tx_ring->desc == NULL || tx_ring->tx_buffer == NULL) + return; + + ring_count = tx_ring->count; + /* first unmmap dma */ + for (index = 0; index < ring_count; index++) { + tx_buffer = &tx_ring->tx_buffer[index]; + if (tx_buffer->dma) { + pci_unmap_page(pdev, tx_buffer->dma, + tx_buffer->length, PCI_DMA_TODEVICE); + tx_buffer->dma = 0; + } + } + /* second free skb */ + for (index = 0; index < ring_count; index++) { + tx_buffer = &tx_ring->tx_buffer[index]; + if (tx_buffer->skb) { + dev_kfree_skb_any(tx_buffer->skb); + tx_buffer->skb = NULL; + } + } + /* Zero out Tx-buffers */ + memset(tx_ring->desc, 0, sizeof(struct atl1e_tpd_desc) * + ring_count); + memset(tx_ring->tx_buffer, 0, sizeof(struct atl1e_tx_buffer) * + ring_count); +} + +/* + * atl1e_clean_rx_ring - Free rx-reservation skbs + * @adapter: board private structure + */ +static void atl1e_clean_rx_ring(struct atl1e_adapter *adapter) +{ + struct atl1e_rx_ring *rx_ring = + (struct atl1e_rx_ring *)&adapter->rx_ring; + struct atl1e_rx_page_desc *rx_page_desc = rx_ring->rx_page_desc; + u16 i, j; + + + if (adapter->ring_vir_addr == NULL) + return; + /* Zero out the descriptor ring */ + for (i = 0; i < adapter->num_rx_queues; i++) { + for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { + if (rx_page_desc[i].rx_page[j].addr != NULL) { + memset(rx_page_desc[i].rx_page[j].addr, 0, + rx_ring->real_page_size); + } + } + } +} + +static void atl1e_cal_ring_size(struct atl1e_adapter *adapter, u32 *ring_size) +{ + *ring_size = ((u32)(adapter->tx_ring.count * + sizeof(struct atl1e_tpd_desc) + 7 + /* tx ring, qword align */ + + adapter->rx_ring.real_page_size * AT_PAGE_NUM_PER_QUEUE * + adapter->num_rx_queues + 31 + /* rx ring, 32 bytes align */ + + (1 + AT_PAGE_NUM_PER_QUEUE * adapter->num_rx_queues) * + sizeof(u32) + 3)); + /* tx, rx cmd, dword align */ +} + +static void atl1e_init_ring_resources(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = NULL; + struct atl1e_rx_ring *rx_ring = NULL; + + tx_ring = &adapter->tx_ring; + rx_ring = &adapter->rx_ring; + + rx_ring->real_page_size = adapter->rx_ring.page_size + + adapter->hw.max_frame_size + + ETH_HLEN + VLAN_HLEN + + ETH_FCS_LEN; + rx_ring->real_page_size = roundup(rx_ring->real_page_size, 32); + atl1e_cal_ring_size(adapter, &adapter->ring_size); + + adapter->ring_vir_addr = NULL; + adapter->rx_ring.desc = NULL; + rwlock_init(&adapter->tx_ring.tx_lock); + + return; +} + +/* + * Read / Write Ptr Initialize: + */ +static void atl1e_init_ring_ptrs(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = NULL; + struct atl1e_rx_ring *rx_ring = NULL; + struct atl1e_rx_page_desc *rx_page_desc = NULL; + int i, j; + + tx_ring = &adapter->tx_ring; + rx_ring = &adapter->rx_ring; + rx_page_desc = rx_ring->rx_page_desc; + + tx_ring->next_to_use = 0; + atomic_set(&tx_ring->next_to_clean, 0); + + for (i = 0; i < adapter->num_rx_queues; i++) { + rx_page_desc[i].rx_using = 0; + rx_page_desc[i].rx_nxseq = 0; + for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { + *rx_page_desc[i].rx_page[j].write_offset_addr = 0; + rx_page_desc[i].rx_page[j].read_offset = 0; + } + } +} + +/* + * atl1e_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl1e_free_ring_resources(struct atl1e_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + atl1e_clean_tx_ring(adapter); + atl1e_clean_rx_ring(adapter); + + if (adapter->ring_vir_addr) { + pci_free_consistent(pdev, adapter->ring_size, + adapter->ring_vir_addr, adapter->ring_dma); + adapter->ring_vir_addr = NULL; + } + + if (adapter->tx_ring.tx_buffer) { + kfree(adapter->tx_ring.tx_buffer); + adapter->tx_ring.tx_buffer = NULL; + } +} + +/* + * atl1e_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1e_tx_ring *tx_ring; + struct atl1e_rx_ring *rx_ring; + struct atl1e_rx_page_desc *rx_page_desc; + int size, i, j; + u32 offset = 0; + int err = 0; + + if (adapter->ring_vir_addr != NULL) + return 0; /* alloced already */ + + tx_ring = &adapter->tx_ring; + rx_ring = &adapter->rx_ring; + + /* real ring DMA buffer */ + + size = adapter->ring_size; + adapter->ring_vir_addr = pci_alloc_consistent(pdev, + adapter->ring_size, &adapter->ring_dma); + + if (adapter->ring_vir_addr == NULL) { + dev_err(&pdev->dev, "pci_alloc_consistent failed, " + "size = D%d", size); + return -ENOMEM; + } + + memset(adapter->ring_vir_addr, 0, adapter->ring_size); + + rx_page_desc = rx_ring->rx_page_desc; + + /* Init TPD Ring */ + tx_ring->dma = roundup(adapter->ring_dma, 8); + offset = tx_ring->dma - adapter->ring_dma; + tx_ring->desc = (struct atl1e_tpd_desc *) + (adapter->ring_vir_addr + offset); + size = sizeof(struct atl1e_tx_buffer) * (tx_ring->count); + tx_ring->tx_buffer = kzalloc(size, GFP_KERNEL); + if (tx_ring->tx_buffer == NULL) { + dev_err(&pdev->dev, "kzalloc failed , size = D%d", size); + err = -ENOMEM; + goto failed; + } + + /* Init RXF-Pages */ + offset += (sizeof(struct atl1e_tpd_desc) * tx_ring->count); + offset = roundup(offset, 32); + + for (i = 0; i < adapter->num_rx_queues; i++) { + for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { + rx_page_desc[i].rx_page[j].dma = + adapter->ring_dma + offset; + rx_page_desc[i].rx_page[j].addr = + adapter->ring_vir_addr + offset; + offset += rx_ring->real_page_size; + } + } + + /* Init CMB dma address */ + tx_ring->cmb_dma = adapter->ring_dma + offset; + tx_ring->cmb = (u32 *)(adapter->ring_vir_addr + offset); + offset += sizeof(u32); + + for (i = 0; i < adapter->num_rx_queues; i++) { + for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { + rx_page_desc[i].rx_page[j].write_offset_dma = + adapter->ring_dma + offset; + rx_page_desc[i].rx_page[j].write_offset_addr = + adapter->ring_vir_addr + offset; + offset += sizeof(u32); + } + } + + if (unlikely(offset > adapter->ring_size)) { + dev_err(&pdev->dev, "offset(%d) > ring size(%d) !!\n", + offset, adapter->ring_size); + err = -1; + goto failed; + } + + return 0; +failed: + if (adapter->ring_vir_addr != NULL) { + pci_free_consistent(pdev, adapter->ring_size, + adapter->ring_vir_addr, adapter->ring_dma); + adapter->ring_vir_addr = NULL; + } + return err; +} + +static inline void atl1e_configure_des_ring(const struct atl1e_adapter *adapter) +{ + + struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw; + struct atl1e_rx_ring *rx_ring = + (struct atl1e_rx_ring *)&adapter->rx_ring; + struct atl1e_tx_ring *tx_ring = + (struct atl1e_tx_ring *)&adapter->tx_ring; + struct atl1e_rx_page_desc *rx_page_desc = NULL; + int i, j; + + AT_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI, + (u32)((adapter->ring_dma & AT_DMA_HI_ADDR_MASK) >> 32)); + AT_WRITE_REG(hw, REG_TPD_BASE_ADDR_LO, + (u32)((tx_ring->dma) & AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_TPD_RING_SIZE, (u16)(tx_ring->count)); + AT_WRITE_REG(hw, REG_HOST_TX_CMB_LO, + (u32)((tx_ring->cmb_dma) & AT_DMA_LO_ADDR_MASK)); + + rx_page_desc = rx_ring->rx_page_desc; + /* RXF Page Physical address / Page Length */ + for (i = 0; i < AT_MAX_RECEIVE_QUEUE; i++) { + AT_WRITE_REG(hw, atl1e_rx_page_hi_addr_regs[i], + (u32)((adapter->ring_dma & + AT_DMA_HI_ADDR_MASK) >> 32)); + for (j = 0; j < AT_PAGE_NUM_PER_QUEUE; j++) { + u32 page_phy_addr; + u32 offset_phy_addr; + + page_phy_addr = rx_page_desc[i].rx_page[j].dma; + offset_phy_addr = + rx_page_desc[i].rx_page[j].write_offset_dma; + + AT_WRITE_REG(hw, atl1e_rx_page_lo_addr_regs[i][j], + page_phy_addr & AT_DMA_LO_ADDR_MASK); + AT_WRITE_REG(hw, atl1e_rx_page_write_offset_regs[i][j], + offset_phy_addr & AT_DMA_LO_ADDR_MASK); + AT_WRITE_REGB(hw, atl1e_rx_page_vld_regs[i][j], 1); + } + } + /* Page Length */ + AT_WRITE_REG(hw, REG_HOST_RXFPAGE_SIZE, rx_ring->page_size); + /* Load all of base address above */ + AT_WRITE_REG(hw, REG_LOAD_PTR, 1); + + return; +} + +static inline void atl1e_configure_tx(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw; + u32 dev_ctrl_data = 0; + u32 max_pay_load = 0; + u32 jumbo_thresh = 0; + u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */ + + /* configure TXQ param */ + if (hw->nic_type != athr_l2e_revB) { + extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN; + if (hw->max_frame_size <= 1500) { + jumbo_thresh = hw->max_frame_size + extra_size; + } else if (hw->max_frame_size < 6*1024) { + jumbo_thresh = + (hw->max_frame_size + extra_size) * 2 / 3; + } else { + jumbo_thresh = (hw->max_frame_size + extra_size) / 2; + } + AT_WRITE_REG(hw, REG_TX_EARLY_TH, (jumbo_thresh + 7) >> 3); + } + + dev_ctrl_data = AT_READ_REG(hw, REG_DEVICE_CTRL); + + max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT)) & + DEVICE_CTRL_MAX_PAYLOAD_MASK; + + hw->dmaw_block = min(max_pay_load, hw->dmaw_block); + + max_pay_load = ((dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT)) & + DEVICE_CTRL_MAX_RREQ_SZ_MASK; + hw->dmar_block = min(max_pay_load, hw->dmar_block); + + if (hw->nic_type != athr_l2e_revB) + AT_WRITE_REGW(hw, REG_TXQ_CTRL + 2, + atl1e_pay_load_size[hw->dmar_block]); + /* enable TXQ */ + AT_WRITE_REGW(hw, REG_TXQ_CTRL, + (((u16)hw->tpd_burst & TXQ_CTRL_NUM_TPD_BURST_MASK) + << TXQ_CTRL_NUM_TPD_BURST_SHIFT) + | TXQ_CTRL_ENH_MODE | TXQ_CTRL_EN); + return; +} + +static inline void atl1e_configure_rx(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = (struct atl1e_hw *)&adapter->hw; + u32 rxf_len = 0; + u32 rxf_low = 0; + u32 rxf_high = 0; + u32 rxf_thresh_data = 0; + u32 rxq_ctrl_data = 0; + + if (hw->nic_type != athr_l2e_revB) { + AT_WRITE_REGW(hw, REG_RXQ_JMBOSZ_RRDTIM, + (u16)((hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK) << + RXQ_JMBOSZ_TH_SHIFT | + (1 & RXQ_JMBO_LKAH_MASK) << + RXQ_JMBO_LKAH_SHIFT)); + + rxf_len = AT_READ_REG(hw, REG_SRAM_RXF_LEN); + rxf_high = rxf_len * 4 / 5; + rxf_low = rxf_len / 5; + rxf_thresh_data = ((rxf_high & RXQ_RXF_PAUSE_TH_HI_MASK) + << RXQ_RXF_PAUSE_TH_HI_SHIFT) | + ((rxf_low & RXQ_RXF_PAUSE_TH_LO_MASK) + << RXQ_RXF_PAUSE_TH_LO_SHIFT); + + AT_WRITE_REG(hw, REG_RXQ_RXF_PAUSE_THRESH, rxf_thresh_data); + } + + /* RRS */ + AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab); + AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu); + + if (hw->rrs_type & atl1e_rrs_ipv4) + rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4; + + if (hw->rrs_type & atl1e_rrs_ipv4_tcp) + rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV4_TCP; + + if (hw->rrs_type & atl1e_rrs_ipv6) + rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6; + + if (hw->rrs_type & atl1e_rrs_ipv6_tcp) + rxq_ctrl_data |= RXQ_CTRL_HASH_TYPE_IPV6_TCP; + + if (hw->rrs_type != atl1e_rrs_disable) + rxq_ctrl_data |= + (RXQ_CTRL_HASH_ENABLE | RXQ_CTRL_RSS_MODE_MQUESINT); + + rxq_ctrl_data |= RXQ_CTRL_IPV6_XSUM_VERIFY_EN | RXQ_CTRL_PBA_ALIGN_32 | + RXQ_CTRL_CUT_THRU_EN | RXQ_CTRL_EN; + + AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); + return; +} + +static inline void atl1e_configure_dma(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = &adapter->hw; + u32 dma_ctrl_data = 0; + + dma_ctrl_data = DMA_CTRL_RXCMB_EN; + dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT; + dma_ctrl_data |= DMA_CTRL_DMAR_REQ_PRI | DMA_CTRL_DMAR_OUT_ORDER; + dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK) + << DMA_CTRL_DMAR_DLY_CNT_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK) + << DMA_CTRL_DMAW_DLY_CNT_SHIFT; + + AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); + return; +} + +static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter) +{ + u32 value; + struct atl1e_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + + /* Config MAC CTRL Register */ + value = MAC_CTRL_TX_EN | + MAC_CTRL_RX_EN ; + + if (FULL_DUPLEX == adapter->link_duplex) + value |= MAC_CTRL_DUPLX; + + value |= ((u32)((SPEED_1000 == adapter->link_speed) ? + MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) << + MAC_CTRL_SPEED_SHIFT); + value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + + value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + value |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + value |= MAC_CTRL_RMV_VLAN; + + value |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + value |= MAC_CTRL_PROMIS_EN; + if (netdev->flags & IFF_ALLMULTI) + value |= MAC_CTRL_MC_ALL_EN; + + AT_WRITE_REG(hw, REG_MAC_CTRL, value); +} + +/* + * atl1e_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static int atl1e_configure(struct atl1e_adapter *adapter) +{ + struct atl1e_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + u32 intr_status_data = 0; + + /* clear interrupt status */ + AT_WRITE_REG(hw, REG_ISR, ~0); + + /* 1. set MAC Address */ + atl1e_hw_set_mac_addr(hw); + + /* 2. Init the Multicast HASH table done by set_muti */ + + /* 3. Clear any WOL status */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + + /* 4. Descripter Ring BaseMem/Length/Read ptr/Write ptr + * TPD Ring/SMB/RXF0 Page CMBs, they use the same + * High 32bits memory */ + atl1e_configure_des_ring(adapter); + + /* 5. set Interrupt Moderator Timer */ + AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, hw->imt); + AT_WRITE_REGW(hw, REG_IRQ_MODU_TIMER2_INIT, hw->imt); + AT_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_LED_MODE | + MASTER_CTRL_ITIMER_EN | MASTER_CTRL_ITIMER2_EN); + + /* 6. rx/tx threshold to trig interrupt */ + AT_WRITE_REGW(hw, REG_TRIG_RRD_THRESH, hw->rrd_thresh); + AT_WRITE_REGW(hw, REG_TRIG_TPD_THRESH, hw->tpd_thresh); + AT_WRITE_REGW(hw, REG_TRIG_RXTIMER, hw->rx_count_down); + AT_WRITE_REGW(hw, REG_TRIG_TXTIMER, hw->tx_count_down); + + /* 7. set Interrupt Clear Timer */ + AT_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, hw->ict); + + /* 8. set MTU */ + AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); + + /* 9. config TXQ early tx threshold */ + atl1e_configure_tx(adapter); + + /* 10. config RXQ */ + atl1e_configure_rx(adapter); + + /* 11. config DMA Engine */ + atl1e_configure_dma(adapter); + + /* 12. smb timer to trig interrupt */ + AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, hw->smb_timer); + + intr_status_data = AT_READ_REG(hw, REG_ISR); + if (unlikely((intr_status_data & ISR_PHY_LINKDOWN) != 0)) { + dev_err(&pdev->dev, "atl1e_configure failed," + "PCIE phy link down\n"); + return -1; + } + + AT_WRITE_REG(hw, REG_ISR, 0x7fffffff); + return 0; +} + +/* + * atl1e_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + */ +static struct net_device_stats *atl1e_get_stats(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw_stats *hw_stats = &adapter->hw_stats; + struct net_device_stats *net_stats = &adapter->net_stats; + + net_stats->rx_packets = hw_stats->rx_ok; + net_stats->tx_packets = hw_stats->tx_ok; + net_stats->rx_bytes = hw_stats->rx_byte_cnt; + net_stats->tx_bytes = hw_stats->tx_byte_cnt; + net_stats->multicast = hw_stats->rx_mcast; + net_stats->collisions = hw_stats->tx_1_col + + hw_stats->tx_2_col * 2 + + hw_stats->tx_late_col + hw_stats->tx_abort_col; + + net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err + + hw_stats->rx_len_err + hw_stats->rx_sz_ov + + hw_stats->rx_rrd_ov + hw_stats->rx_align_err; + net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov; + net_stats->rx_length_errors = hw_stats->rx_len_err; + net_stats->rx_crc_errors = hw_stats->rx_fcs_err; + net_stats->rx_frame_errors = hw_stats->rx_align_err; + net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col + + hw_stats->tx_underrun + hw_stats->tx_trunc; + net_stats->tx_fifo_errors = hw_stats->tx_underrun; + net_stats->tx_aborted_errors = hw_stats->tx_abort_col; + net_stats->tx_window_errors = hw_stats->tx_late_col; + + return &adapter->net_stats; +} + +static void atl1e_update_hw_stats(struct atl1e_adapter *adapter) +{ + u16 hw_reg_addr = 0; + unsigned long *stats_item = NULL; + + /* update rx status */ + hw_reg_addr = REG_MAC_RX_STATUS_BIN; + stats_item = &adapter->hw_stats.rx_ok; + while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { + *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr); + stats_item++; + hw_reg_addr += 4; + } + /* update tx status */ + hw_reg_addr = REG_MAC_TX_STATUS_BIN; + stats_item = &adapter->hw_stats.tx_ok; + while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { + *stats_item += AT_READ_REG(&adapter->hw, hw_reg_addr); + stats_item++; + hw_reg_addr += 4; + } +} + +static inline void atl1e_clear_phy_int(struct atl1e_adapter *adapter) +{ + u16 phy_data; + + spin_lock(&adapter->mdio_lock); + atl1e_read_phy_reg(&adapter->hw, MII_INT_STATUS, &phy_data); + spin_unlock(&adapter->mdio_lock); +} + +static bool atl1e_clean_tx_irq(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = (struct atl1e_tx_ring *) + &adapter->tx_ring; + struct atl1e_tx_buffer *tx_buffer = NULL; + u16 hw_next_to_clean = AT_READ_REGW(&adapter->hw, REG_TPD_CONS_IDX); + u16 next_to_clean = atomic_read(&tx_ring->next_to_clean); + + while (next_to_clean != hw_next_to_clean) { + tx_buffer = &tx_ring->tx_buffer[next_to_clean]; + if (tx_buffer->dma) { + pci_unmap_page(adapter->pdev, tx_buffer->dma, + tx_buffer->length, PCI_DMA_TODEVICE); + tx_buffer->dma = 0; + } + + if (tx_buffer->skb) { + dev_kfree_skb_irq(tx_buffer->skb); + tx_buffer->skb = NULL; + } + + if (++next_to_clean == tx_ring->count) + next_to_clean = 0; + } + + atomic_set(&tx_ring->next_to_clean, next_to_clean); + + if (netif_queue_stopped(adapter->netdev) && + netif_carrier_ok(adapter->netdev)) { + netif_wake_queue(adapter->netdev); + } + + return true; +} + +/* + * atl1e_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1e_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct atl1e_hw *hw = &adapter->hw; + int max_ints = AT_MAX_INT_WORK; + int handled = IRQ_NONE; + u32 status; + + do { + status = AT_READ_REG(hw, REG_ISR); + if ((status & IMR_NORMAL_MASK) == 0 || + (status & ISR_DIS_INT) != 0) { + if (max_ints != AT_MAX_INT_WORK) + handled = IRQ_HANDLED; + break; + } + /* link event */ + if (status & ISR_GPHY) + atl1e_clear_phy_int(adapter); + /* Ack ISR */ + AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); + + handled = IRQ_HANDLED; + /* check if PCIE PHY Link down */ + if (status & ISR_PHY_LINKDOWN) { + dev_err(&pdev->dev, + "pcie phy linkdown %x\n", status); + if (netif_running(adapter->netdev)) { + /* reset MAC */ + atl1e_irq_reset(adapter); + schedule_work(&adapter->reset_task); + break; + } + } + + /* check if DMA read/write error */ + if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { + dev_err(&pdev->dev, + "PCIE DMA RW error (status = 0x%x)\n", + status); + atl1e_irq_reset(adapter); + schedule_work(&adapter->reset_task); + break; + } + + if (status & ISR_SMB) + atl1e_update_hw_stats(adapter); + + /* link event */ + if (status & (ISR_GPHY | ISR_MANUAL)) { + adapter->net_stats.tx_carrier_errors++; + atl1e_link_chg_event(adapter); + break; + } + + /* transmit event */ + if (status & ISR_TX_EVENT) + atl1e_clean_tx_irq(adapter); + + if (status & ISR_RX_EVENT) { + /* + * disable rx interrupts, without + * the synchronize_irq bit + */ + AT_WRITE_REG(hw, REG_IMR, + IMR_NORMAL_MASK & ~ISR_RX_EVENT); + AT_WRITE_FLUSH(hw); + if (likely(netif_rx_schedule_prep(netdev, + &adapter->napi))) + __netif_rx_schedule(netdev, &adapter->napi); + } + } while (--max_ints > 0); + /* re-enable Interrupt*/ + AT_WRITE_REG(&adapter->hw, REG_ISR, 0); + + return handled; +} + +static inline void atl1e_rx_checksum(struct atl1e_adapter *adapter, + struct sk_buff *skb, struct atl1e_recv_ret_status *prrs) +{ + u8 *packet = (u8 *)(prrs + 1); + struct iphdr *iph; + u16 head_len = ETH_HLEN; + u16 pkt_flags; + u16 err_flags; + + skb->ip_summed = CHECKSUM_NONE; + pkt_flags = prrs->pkt_flag; + err_flags = prrs->err_flag; + if (((pkt_flags & RRS_IS_IPV4) || (pkt_flags & RRS_IS_IPV6)) && + ((pkt_flags & RRS_IS_TCP) || (pkt_flags & RRS_IS_UDP))) { + if (pkt_flags & RRS_IS_IPV4) { + if (pkt_flags & RRS_IS_802_3) + head_len += 8; + iph = (struct iphdr *) (packet + head_len); + if (iph->frag_off != 0 && !(pkt_flags & RRS_IS_IP_DF)) + goto hw_xsum; + } + if (!(err_flags & (RRS_ERR_IP_CSUM | RRS_ERR_L4_CSUM))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + return; + } + } + +hw_xsum : + return; +} + +static struct atl1e_rx_page *atl1e_get_rx_page(struct atl1e_adapter *adapter, + u8 que) +{ + struct atl1e_rx_page_desc *rx_page_desc = + (struct atl1e_rx_page_desc *) adapter->rx_ring.rx_page_desc; + u8 rx_using = rx_page_desc[que].rx_using; + + return (struct atl1e_rx_page *)&(rx_page_desc[que].rx_page[rx_using]); +} + +static void atl1e_clean_rx_irq(struct atl1e_adapter *adapter, u8 que, + int *work_done, int work_to_do) +{ + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + struct atl1e_rx_ring *rx_ring = (struct atl1e_rx_ring *) + &adapter->rx_ring; + struct atl1e_rx_page_desc *rx_page_desc = + (struct atl1e_rx_page_desc *) rx_ring->rx_page_desc; + struct sk_buff *skb = NULL; + struct atl1e_rx_page *rx_page = atl1e_get_rx_page(adapter, que); + u32 packet_size, write_offset; + struct atl1e_recv_ret_status *prrs; + + write_offset = *(rx_page->write_offset_addr); + if (likely(rx_page->read_offset < write_offset)) { + do { + if (*work_done >= work_to_do) + break; + (*work_done)++; + /* get new packet's rrs */ + prrs = (struct atl1e_recv_ret_status *) (rx_page->addr + + rx_page->read_offset); + /* check sequence number */ + if (prrs->seq_num != rx_page_desc[que].rx_nxseq) { + dev_err(&pdev->dev, + "rx sequence number" + " error (rx=%d) (expect=%d)\n", + prrs->seq_num, + rx_page_desc[que].rx_nxseq); + rx_page_desc[que].rx_nxseq++; + /* just for debug use */ + AT_WRITE_REG(&adapter->hw, REG_DEBUG_DATA0, + (((u32)prrs->seq_num) << 16) | + rx_page_desc[que].rx_nxseq); + goto fatal_err; + } + rx_page_desc[que].rx_nxseq++; + + /* error packet */ + if (prrs->pkt_flag & RRS_IS_ERR_FRAME) { + if (prrs->err_flag & (RRS_ERR_BAD_CRC | + RRS_ERR_DRIBBLE | RRS_ERR_CODE | + RRS_ERR_TRUNC)) { + /* hardware error, discard this packet*/ + dev_err(&pdev->dev, + "rx packet desc error %x\n", + *((u32 *)prrs + 1)); + goto skip_pkt; + } + } + + packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) & + RRS_PKT_SIZE_MASK) - 4; /* CRC */ + skb = netdev_alloc_skb(netdev, + packet_size + NET_IP_ALIGN); + if (skb == NULL) { + dev_warn(&pdev->dev, "%s: Memory squeeze," + "deferring packet.\n", netdev->name); + goto skip_pkt; + } + skb_reserve(skb, NET_IP_ALIGN); + skb->dev = netdev; + memcpy(skb->data, (u8 *)(prrs + 1), packet_size); + skb_put(skb, packet_size); + skb->protocol = eth_type_trans(skb, netdev); + atl1e_rx_checksum(adapter, skb, prrs); + + if (unlikely(adapter->vlgrp && + (prrs->pkt_flag & RRS_IS_VLAN_TAG))) { + u16 vlan_tag = (prrs->vtag >> 4) | + ((prrs->vtag & 7) << 13) | + ((prrs->vtag & 8) << 9); + dev_dbg(&pdev->dev, + "RXD VLAN TAG=0x%04x\n", + prrs->vtag); + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + vlan_tag); + } else { + netif_receive_skb(skb); + } + + netdev->last_rx = jiffies; +skip_pkt: + /* skip current packet whether it's ok or not. */ + rx_page->read_offset += + (((u32)((prrs->word1 >> RRS_PKT_SIZE_SHIFT) & + RRS_PKT_SIZE_MASK) + + sizeof(struct atl1e_recv_ret_status) + 31) & + 0xFFFFFFE0); + + if (rx_page->read_offset >= rx_ring->page_size) { + /* mark this page clean */ + u16 reg_addr; + u8 rx_using; + + rx_page->read_offset = + *(rx_page->write_offset_addr) = 0; + rx_using = rx_page_desc[que].rx_using; + reg_addr = + atl1e_rx_page_vld_regs[que][rx_using]; + AT_WRITE_REGB(&adapter->hw, reg_addr, 1); + rx_page_desc[que].rx_using ^= 1; + rx_page = atl1e_get_rx_page(adapter, que); + } + write_offset = *(rx_page->write_offset_addr); + } while (rx_page->read_offset < write_offset); + } + + return; + +fatal_err: + if (!test_bit(__AT_DOWN, &adapter->flags)) + schedule_work(&adapter->reset_task); +} + +/* + * atl1e_clean - NAPI Rx polling callback + * @adapter: board private structure + */ +static int atl1e_clean(struct napi_struct *napi, int budget) +{ + struct atl1e_adapter *adapter = + container_of(napi, struct atl1e_adapter, napi); + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + u32 imr_data; + int work_done = 0; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; + + atl1e_clean_rx_irq(adapter, 0, &work_done, budget); + + /* If no Tx and not enough Rx work done, exit the polling mode */ + if (work_done < budget) { +quit_polling: + netif_rx_complete(netdev, napi); + imr_data = AT_READ_REG(&adapter->hw, REG_IMR); + AT_WRITE_REG(&adapter->hw, REG_IMR, imr_data | ISR_RX_EVENT); + /* test debug */ + if (test_bit(__AT_DOWN, &adapter->flags)) { + atomic_dec(&adapter->irq_sem); + dev_err(&pdev->dev, + "atl1e_clean is called when AT_DOWN\n"); + } + /* reenable RX intr */ + /*atl1e_irq_enable(adapter); */ + + } + return work_done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER + +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void atl1e_netpoll(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + atl1e_intr(adapter->pdev->irq, netdev); + enable_irq(adapter->pdev->irq); +} +#endif + +static inline u16 atl1e_tpd_avail(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; + u16 next_to_use = 0; + u16 next_to_clean = 0; + + next_to_clean = atomic_read(&tx_ring->next_to_clean); + next_to_use = tx_ring->next_to_use; + + return (u16)(next_to_clean > next_to_use) ? + (next_to_clean - next_to_use - 1) : + (tx_ring->count + next_to_clean - next_to_use - 1); +} + +/* + * get next usable tpd + * Note: should call atl1e_tdp_avail to make sure + * there is enough tpd to use + */ +static struct atl1e_tpd_desc *atl1e_get_tpd(struct atl1e_adapter *adapter) +{ + struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; + u16 next_to_use = 0; + + next_to_use = tx_ring->next_to_use; + if (++tx_ring->next_to_use == tx_ring->count) + tx_ring->next_to_use = 0; + + memset(&tx_ring->desc[next_to_use], 0, sizeof(struct atl1e_tpd_desc)); + return (struct atl1e_tpd_desc *)&tx_ring->desc[next_to_use]; +} + +static struct atl1e_tx_buffer * +atl1e_get_tx_buffer(struct atl1e_adapter *adapter, struct atl1e_tpd_desc *tpd) +{ + struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; + + return &tx_ring->tx_buffer[tpd - tx_ring->desc]; +} + +/* Calculate the transmit packet descript needed*/ +static u16 atl1e_cal_tdp_req(const struct sk_buff *skb) +{ + int i = 0; + u16 tpd_req = 1; + u16 fg_size = 0; + u16 proto_hdr_len = 0; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + fg_size = skb_shinfo(skb)->frags[i].size; + tpd_req += ((fg_size + MAX_TX_BUF_LEN - 1) >> MAX_TX_BUF_SHIFT); + } + + if (skb_is_gso(skb)) { + if (skb->protocol == ntohs(ETH_P_IP) || + (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6)) { + proto_hdr_len = skb_transport_offset(skb) + + tcp_hdrlen(skb); + if (proto_hdr_len < skb_headlen(skb)) { + tpd_req += ((skb_headlen(skb) - proto_hdr_len + + MAX_TX_BUF_LEN - 1) >> + MAX_TX_BUF_SHIFT); + } + } + + } + return tpd_req; +} + +static int atl1e_tso_csum(struct atl1e_adapter *adapter, + struct sk_buff *skb, struct atl1e_tpd_desc *tpd) +{ + struct pci_dev *pdev = adapter->pdev; + u8 hdr_len; + u32 real_len; + unsigned short offload_type; + int err; + + if (skb_is_gso(skb)) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return -1; + } + offload_type = skb_shinfo(skb)->gso_type; + + if (offload_type & SKB_GSO_TCPV4) { + real_len = (((unsigned char *)ip_hdr(skb) - skb->data) + + ntohs(ip_hdr(skb)->tot_len)); + + if (real_len < skb->len) + pskb_trim(skb, real_len); + + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + dev_warn(&pdev->dev, + "IPV4 tso with zero data??\n"); + goto check_sum; + } else { + ip_hdr(skb)->check = 0; + ip_hdr(skb)->tot_len = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic( + ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + tpd->word3 |= (ip_hdr(skb)->ihl & + TDP_V4_IPHL_MASK) << + TPD_V4_IPHL_SHIFT; + tpd->word3 |= ((tcp_hdrlen(skb) >> 2) & + TPD_TCPHDRLEN_MASK) << + TPD_TCPHDRLEN_SHIFT; + tpd->word3 |= ((skb_shinfo(skb)->gso_size) & + TPD_MSS_MASK) << TPD_MSS_SHIFT; + tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; + } + return 0; + } + + if (offload_type & SKB_GSO_TCPV6) { + real_len = (((unsigned char *)ipv6_hdr(skb) - skb->data) + + ntohs(ipv6_hdr(skb)->payload_len)); + if (real_len < skb->len) + pskb_trim(skb, real_len); + + /* check payload == 0 byte ? */ + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + dev_warn(&pdev->dev, + "IPV6 tso with zero data??\n"); + goto check_sum; + } else { + tcp_hdr(skb)->check = ~csum_ipv6_magic( + &ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + tpd->word3 |= 1 << TPD_IP_VERSION_SHIFT; + hdr_len >>= 1; + tpd->word3 |= (hdr_len & TPD_V6_IPHLLO_MASK) << + TPD_V6_IPHLLO_SHIFT; + tpd->word3 |= ((hdr_len >> 3) & + TPD_V6_IPHLHI_MASK) << + TPD_V6_IPHLHI_SHIFT; + tpd->word3 |= (tcp_hdrlen(skb) >> 2 & + TPD_TCPHDRLEN_MASK) << + TPD_TCPHDRLEN_SHIFT; + tpd->word3 |= ((skb_shinfo(skb)->gso_size) & + TPD_MSS_MASK) << TPD_MSS_SHIFT; + tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT; + } + } + return 0; + } + +check_sum: + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + u8 css, cso; + + cso = skb_transport_offset(skb); + if (unlikely(cso & 0x1)) { + dev_err(&adapter->pdev->dev, + "pay load offset should not ant event number\n"); + return -1; + } else { + css = cso + skb->csum_offset; + tpd->word3 |= (cso & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + tpd->word3 |= (css & TPD_CCSUMOFFSET_MASK) << + TPD_CCSUMOFFSET_SHIFT; + tpd->word3 |= 1 << TPD_CC_SEGMENT_EN_SHIFT; + } + } + + return 0; +} + +static void atl1e_tx_map(struct atl1e_adapter *adapter, + struct sk_buff *skb, struct atl1e_tpd_desc *tpd) +{ + struct atl1e_tpd_desc *use_tpd = NULL; + struct atl1e_tx_buffer *tx_buffer = NULL; + u16 buf_len = skb->len - skb->data_len; + u16 map_len = 0; + u16 mapped_len = 0; + u16 hdr_len = 0; + u16 nr_frags; + u16 f; + int segment; + + nr_frags = skb_shinfo(skb)->nr_frags; + segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK; + if (segment) { + /* TSO */ + map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + use_tpd = tpd; + + tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); + tx_buffer->length = map_len; + tx_buffer->dma = pci_map_single(adapter->pdev, + skb->data, hdr_len, PCI_DMA_TODEVICE); + mapped_len += map_len; + use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); + use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | + ((cpu_to_le32(tx_buffer->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); + } + + while (mapped_len < buf_len) { + /* mapped_len == 0, means we should use the first tpd, + which is given by caller */ + if (mapped_len == 0) { + use_tpd = tpd; + } else { + use_tpd = atl1e_get_tpd(adapter); + memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc)); + } + tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); + tx_buffer->skb = NULL; + + tx_buffer->length = map_len = + ((buf_len - mapped_len) >= MAX_TX_BUF_LEN) ? + MAX_TX_BUF_LEN : (buf_len - mapped_len); + tx_buffer->dma = + pci_map_single(adapter->pdev, skb->data + mapped_len, + map_len, PCI_DMA_TODEVICE); + mapped_len += map_len; + use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); + use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | + ((cpu_to_le32(tx_buffer->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + u16 i; + u16 seg_num; + + frag = &skb_shinfo(skb)->frags[f]; + buf_len = frag->size; + + seg_num = (buf_len + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN; + for (i = 0; i < seg_num; i++) { + use_tpd = atl1e_get_tpd(adapter); + memcpy(use_tpd, tpd, sizeof(struct atl1e_tpd_desc)); + + tx_buffer = atl1e_get_tx_buffer(adapter, use_tpd); + if (tx_buffer->skb) + BUG(); + + tx_buffer->skb = NULL; + tx_buffer->length = + (buf_len > MAX_TX_BUF_LEN) ? + MAX_TX_BUF_LEN : buf_len; + buf_len -= tx_buffer->length; + + tx_buffer->dma = + pci_map_page(adapter->pdev, frag->page, + frag->page_offset + + (i * MAX_TX_BUF_LEN), + tx_buffer->length, + PCI_DMA_TODEVICE); + use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma); + use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) | + ((cpu_to_le32(tx_buffer->length) & + TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT); + } + } + + if ((tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK) + /* note this one is a tcp header */ + tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT; + /* The last tpd */ + + use_tpd->word3 |= 1 << TPD_EOP_SHIFT; + /* The last buffer info contain the skb address, + so it will be free after unmap */ + tx_buffer->skb = skb; +} + +static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count, + struct atl1e_tpd_desc *tpd) +{ + struct atl1e_tx_ring *tx_ring = &adapter->tx_ring; + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + AT_WRITE_REG(&adapter->hw, REG_MB_TPD_PROD_IDX, tx_ring->next_to_use); +} + +static int atl1e_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + u16 tpd_req = 1; + struct atl1e_tpd_desc *tpd; + + if (test_bit(__AT_DOWN, &adapter->flags)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (unlikely(skb->len <= 0)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + tpd_req = atl1e_cal_tdp_req(skb); + if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) + return NETDEV_TX_LOCKED; + + if (atl1e_tpd_avail(adapter) < tpd_req) { + /* no enough descriptor, just stop queue */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_BUSY; + } + + tpd = atl1e_get_tpd(adapter); + + if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) { + u16 vlan_tag = vlan_tx_tag_get(skb); + u16 atl1e_vlan_tag; + + tpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; + AT_VLAN_TAG_TO_TPD_TAG(vlan_tag, atl1e_vlan_tag); + tpd->word2 |= (atl1e_vlan_tag & TPD_VLANTAG_MASK) << + TPD_VLAN_SHIFT; + } + + if (skb->protocol == ntohs(ETH_P_8021Q)) + tpd->word3 |= 1 << TPD_VL_TAGGED_SHIFT; + + if (skb_network_offset(skb) != ETH_HLEN) + tpd->word3 |= 1 << TPD_ETHTYPE_SHIFT; /* 802.3 frame */ + + /* do TSO and check sum */ + if (atl1e_tso_csum(adapter, skb, tpd) != 0) { + spin_unlock_irqrestore(&adapter->tx_lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + atl1e_tx_map(adapter, skb, tpd); + atl1e_tx_queue(adapter, tpd_req, tpd); + + netdev->trans_start = jiffies; + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_OK; +} + +static void atl1e_free_irq(struct atl1e_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); +} + +static int atl1e_request_irq(struct atl1e_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + int flags = 0; + int err = 0; + + adapter->have_msi = true; + err = pci_enable_msi(adapter->pdev); + if (err) { + dev_dbg(&pdev->dev, + "Unable to allocate MSI interrupt Error: %d\n", err); + adapter->have_msi = false; + } else + netdev->irq = pdev->irq; + + + if (!adapter->have_msi) + flags |= IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &atl1e_intr, flags, + netdev->name, netdev); + if (err) { + dev_dbg(&pdev->dev, + "Unable to allocate interrupt Error: %d\n", err); + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); + return err; + } + dev_dbg(&pdev->dev, "atl1e_request_irq OK\n"); + return err; +} + +int atl1e_up(struct atl1e_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err = 0; + u32 val; + + /* hardware has been reset, we need to reload some things */ + err = atl1e_init_hw(&adapter->hw); + if (err) { + err = -EIO; + return err; + } + atl1e_init_ring_ptrs(adapter); + atl1e_set_multi(netdev); + atl1e_restore_vlan(adapter); + + if (atl1e_configure(adapter)) { + err = -EIO; + goto err_up; + } + + clear_bit(__AT_DOWN, &adapter->flags); + napi_enable(&adapter->napi); + atl1e_irq_enable(adapter); + val = AT_READ_REG(&adapter->hw, REG_MASTER_CTRL); + AT_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, + val | MASTER_CTRL_MANUAL_INT); + +err_up: + return err; +} + +void atl1e_down(struct atl1e_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__AT_DOWN, &adapter->flags); + +#ifdef NETIF_F_LLTX + netif_stop_queue(netdev); +#else + netif_tx_disable(netdev); +#endif + + /* reset MAC to disable all RX/TX */ + atl1e_reset_hw(&adapter->hw); + msleep(1); + + napi_disable(&adapter->napi); + atl1e_del_timer(adapter); + atl1e_irq_disable(adapter); + + netif_carrier_off(netdev); + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + atl1e_clean_tx_ring(adapter); + atl1e_clean_rx_ring(adapter); +} + +/* + * atl1e_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1e_open(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + int err; + + /* disallow open during test */ + if (test_bit(__AT_TESTING, &adapter->flags)) + return -EBUSY; + + /* allocate rx/tx dma buffer & descriptors */ + atl1e_init_ring_resources(adapter); + err = atl1e_setup_ring_resources(adapter); + if (unlikely(err)) + return err; + + err = atl1e_request_irq(adapter); + if (unlikely(err)) + goto err_req_irq; + + err = atl1e_up(adapter); + if (unlikely(err)) + goto err_up; + + return 0; + +err_up: + atl1e_free_irq(adapter); +err_req_irq: + atl1e_free_ring_resources(adapter); + atl1e_reset_hw(&adapter->hw); + + return err; +} + +/* + * atl1e_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1e_close(struct net_device *netdev) +{ + struct atl1e_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1e_down(adapter); + atl1e_free_irq(adapter); + atl1e_free_ring_resources(adapter); + + return 0; +} + +#ifdef CONFIG_PM +static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev_priv(netdev); + struct atl1e_hw *hw = &adapter->hw; + u32 ctrl = 0; + u32 mac_ctrl_data = 0; + u32 wol_ctrl_data = 0; + u16 mii_advertise_data = 0; + u16 mii_bmsr_data = 0; + u16 mii_intr_status_data = 0; + u32 wufc = adapter->wol; + u32 i; +#ifdef CONFIG_PM + int retval = 0; +#endif + + if (netif_running(netdev)) { + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1e_down(adapter); + } + netif_device_detach(netdev); + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + if (wufc) { + /* get link status */ + atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + + mii_advertise_data = MII_AR_10T_HD_CAPS; + + if ((atl1e_write_phy_reg(hw, MII_AT001_CR, 0) != 0) || + (atl1e_write_phy_reg(hw, + MII_ADVERTISE, mii_advertise_data) != 0) || + (atl1e_phy_commit(hw)) != 0) { + dev_dbg(&pdev->dev, "set phy register failed\n"); + goto wol_dis; + } + + hw->phy_configured = false; /* re-init PHY when resume */ + + /* turn on magic packet wol */ + if (wufc & AT_WUFC_MAG) + wol_ctrl_data |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + + if (wufc & AT_WUFC_LNKC) { + /* if orignal link status is link, just wait for retrive link */ + if (mii_bmsr_data & BMSR_LSTATUS) { + for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { + msleep(100); + atl1e_read_phy_reg(hw, MII_BMSR, + (u16 *)&mii_bmsr_data); + if (mii_bmsr_data & BMSR_LSTATUS) + break; + } + + if ((mii_bmsr_data & BMSR_LSTATUS) == 0) + dev_dbg(&pdev->dev, + "%s: Link may change" + "when suspend\n", + atl1e_driver_name); + } + wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; + /* only link up can wake up */ + if (atl1e_write_phy_reg(hw, MII_INT_CTRL, 0x400) != 0) { + dev_dbg(&pdev->dev, "%s: read write phy " + "register failed.\n", + atl1e_driver_name); + goto wol_dis; + } + } + /* clear phy interrupt */ + atl1e_read_phy_reg(hw, MII_INT_STATUS, &mii_intr_status_data); + /* Config MAC Ctrl register */ + mac_ctrl_data = MAC_CTRL_RX_EN; + /* set to 10/100M halt duplex */ + mac_ctrl_data |= MAC_CTRL_SPEED_10_100 << MAC_CTRL_SPEED_SHIFT; + mac_ctrl_data |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + + /* magic packet maybe Broadcast&multicast&Unicast frame */ + if (wufc & AT_WUFC_MAG) + mac_ctrl_data |= MAC_CTRL_BC_EN; + + dev_dbg(&pdev->dev, + "%s: suspend MAC=0x%x\n", + atl1e_driver_name, mac_ctrl_data); + + AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + /* pcie patch */ + ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto suspend_exit; + } +wol_dis: + + /* WOL disabled */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + + /* pcie patch */ + ctrl = AT_READ_REG(hw, REG_PCIE_PHYMISC); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + + atl1e_force_ps(hw); + hw->phy_configured = false; /* re-init PHY when resume */ + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + +suspend_exit: + + if (netif_running(netdev)) + atl1e_free_irq(adapter); + + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int atl1e_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev_priv(netdev); + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "ATL1e: Cannot enable PCI" + " device from suspend\n"); + return err; + } + + pci_set_master(pdev); + + AT_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */ + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); + + if (netif_running(netdev)) + err = atl1e_request_irq(adapter); + if (err) + return err; + + atl1e_reset_hw(&adapter->hw); + + if (netif_running(netdev)) + atl1e_up(adapter); + + netif_device_attach(netdev); + + return 0; +} +#endif + +static void atl1e_shutdown(struct pci_dev *pdev) +{ + atl1e_suspend(pdev, PMSG_SUSPEND); +} + +static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) +{ + SET_NETDEV_DEV(netdev, &pdev->dev); + pci_set_drvdata(pdev, netdev); + + netdev->irq = pdev->irq; + netdev->open = &atl1e_open; + netdev->stop = &atl1e_close; + netdev->hard_start_xmit = &atl1e_xmit_frame; + netdev->get_stats = &atl1e_get_stats; + netdev->set_multicast_list = &atl1e_set_multi; + netdev->set_mac_address = &atl1e_set_mac_addr; + netdev->change_mtu = &atl1e_change_mtu; + netdev->do_ioctl = &atl1e_ioctl; + netdev->tx_timeout = &atl1e_tx_timeout; + netdev->watchdog_timeo = AT_TX_WATCHDOG; + netdev->vlan_rx_register = atl1e_vlan_rx_register; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = atl1e_netpoll; +#endif + atl1e_set_ethtool_ops(netdev); + + netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->features |= NETIF_F_LLTX; + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + + return 0; +} + +/* + * atl1e_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1e_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1e_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int __devinit atl1e_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1e_adapter *adapter = NULL; + static int cards_found; + + int err = 0; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + return err; + } + + /* + * The atl1e chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) || + (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) { + dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); + goto err_dma; + } + + err = pci_request_regions(pdev, atl1e_driver_name); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + goto err_pci_reg; + } + + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1e_adapter)); + if (netdev == NULL) { + err = -ENOMEM; + dev_err(&pdev->dev, "etherdev alloc failed\n"); + goto err_alloc_etherdev; + } + + err = atl1e_init_netdev(netdev, pdev); + if (err) { + dev_err(&pdev->dev, "init netdevice failed\n"); + goto err_init_netdev; + } + adapter = netdev_priv(netdev); + adapter->bd_number = cards_found; + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.adapter = adapter; + adapter->hw.hw_addr = pci_iomap(pdev, BAR_0, 0); + if (!adapter->hw.hw_addr) { + err = -EIO; + dev_err(&pdev->dev, "cannot map device registers\n"); + goto err_ioremap; + } + netdev->base_addr = (unsigned long)adapter->hw.hw_addr; + + /* init mii data */ + adapter->mii.dev = netdev; + adapter->mii.mdio_read = atl1e_mdio_read; + adapter->mii.mdio_write = atl1e_mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK; + + netif_napi_add(netdev, &adapter->napi, atl1e_clean, 64); + + init_timer(&adapter->phy_config_timer); + adapter->phy_config_timer.function = &atl1e_phy_config; + adapter->phy_config_timer.data = (unsigned long) adapter; + + /* get user settings */ + atl1e_check_options(adapter); + /* + * Mark all PCI regions associated with PCI device + * pdev as being reserved by owner atl1e_driver_name + * Enables bus-mastering on the device and calls + * pcibios_set_master to do the needed arch specific settings + */ + atl1e_setup_pcicmd(pdev); + /* setup the private structure */ + err = atl1e_sw_init(adapter); + if (err) { + dev_err(&pdev->dev, "net device private data init failed\n"); + goto err_sw_init; + } + + /* Init GPHY as early as possible due to power saving issue */ + spin_lock(&adapter->mdio_lock); + atl1e_phy_init(&adapter->hw); + spin_unlock(&adapter->mdio_lock); + /* reset the controller to + * put the device in a known good starting state */ + err = atl1e_reset_hw(&adapter->hw); + if (err) { + err = -EIO; + goto err_reset; + } + + if (atl1e_read_mac_addr(&adapter->hw) != 0) { + err = -EIO; + dev_err(&pdev->dev, "get mac address failed\n"); + goto err_eeprom; + } + + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); + dev_dbg(&pdev->dev, "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n", + adapter->hw.mac_addr[0], adapter->hw.mac_addr[1], + adapter->hw.mac_addr[2], adapter->hw.mac_addr[3], + adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]); + + INIT_WORK(&adapter->reset_task, atl1e_reset_task); + INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task); + err = register_netdev(netdev); + if (err) { + dev_err(&pdev->dev, "register netdevice failed\n"); + goto err_register; + } + + /* assume we have no link for now */ + netif_stop_queue(netdev); + netif_carrier_off(netdev); + + cards_found++; + + return 0; + +err_reset: +err_register: +err_sw_init: +err_eeprom: + iounmap(adapter->hw.hw_addr); +err_init_netdev: +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/* + * atl1e_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1e_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void __devexit atl1e_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev_priv(netdev); + + /* + * flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled + */ + set_bit(__AT_DOWN, &adapter->flags); + + atl1e_del_timer(adapter); + atl1e_cancel_work(adapter); + + unregister_netdev(netdev); + atl1e_free_ring_resources(adapter); + atl1e_force_ps(&adapter->hw); + iounmap(adapter->hw.hw_addr); + pci_release_regions(pdev); + free_netdev(netdev); + pci_disable_device(pdev); +} + +/* + * atl1e_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t +atl1e_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev->priv; + + netif_device_detach(netdev); + + if (netif_running(netdev)) + atl1e_down(adapter); + + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/* + * atl1e_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the e1000_resume routine. + */ +static pci_ers_result_t atl1e_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev->priv; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "ATL1e: Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + atl1e_reset_hw(&adapter->hw); + + return PCI_ERS_RESULT_RECOVERED; +} + +/* + * atl1e_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the atl1e_resume routine. + */ +static void atl1e_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1e_adapter *adapter = netdev->priv; + + if (netif_running(netdev)) { + if (atl1e_up(adapter)) { + dev_err(&pdev->dev, + "ATL1e: can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); +} + +static struct pci_error_handlers atl1e_err_handler = { + .error_detected = atl1e_io_error_detected, + .slot_reset = atl1e_io_slot_reset, + .resume = atl1e_io_resume, +}; + +static struct pci_driver atl1e_driver = { + .name = atl1e_driver_name, + .id_table = atl1e_pci_tbl, + .probe = atl1e_probe, + .remove = __devexit_p(atl1e_remove), + /* Power Managment Hooks */ +#ifdef CONFIG_PM + .suspend = atl1e_suspend, + .resume = atl1e_resume, +#endif + .shutdown = atl1e_shutdown, + .err_handler = &atl1e_err_handler +}; + +/* + * atl1e_init_module - Driver Registration Routine + * + * atl1e_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl1e_init_module(void) +{ + return pci_register_driver(&atl1e_driver); +} + +/* + * atl1e_exit_module - Driver Exit Cleanup Routine + * + * atl1e_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl1e_exit_module(void) +{ + pci_unregister_driver(&atl1e_driver); +} + +module_init(atl1e_init_module); +module_exit(atl1e_exit_module); diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/atl1e/atl1e_param.c new file mode 100644 index 000000000000..f72abb34b0cd --- /dev/null +++ b/drivers/net/atl1e/atl1e_param.c @@ -0,0 +1,263 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include + +#include "atl1e.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define ATL1E_MAX_NIC 32 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ +#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET } + +#define ATL1E_PARAM(x, desc) \ + static int __devinitdata x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \ + static int num_##x; \ + module_param_array_named(x, x, int, &num_##x, 0); \ + MODULE_PARM_DESC(x, desc); + +/* Transmit Memory count + * + * Valid Range: 64-2048 + * + * Default Value: 128 + */ +#define ATL1E_MIN_TX_DESC_CNT 32 +#define ATL1E_MAX_TX_DESC_CNT 1020 +#define ATL1E_DEFAULT_TX_DESC_CNT 128 +ATL1E_PARAM(tx_desc_cnt, "Transmit description count"); + +/* Receive Memory Block Count + * + * Valid Range: 16-512 + * + * Default Value: 128 + */ +#define ATL1E_MIN_RX_MEM_SIZE 8 /* 8KB */ +#define ATL1E_MAX_RX_MEM_SIZE 1024 /* 1MB */ +#define ATL1E_DEFAULT_RX_MEM_SIZE 256 /* 128KB */ +ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)"); + +/* User Specified MediaType Override + * + * Valid Range: 0-5 + * - 0 - auto-negotiate at all supported speeds + * - 1 - only link at 100Mbps Full Duplex + * - 2 - only link at 100Mbps Half Duplex + * - 3 - only link at 10Mbps Full Duplex + * - 4 - only link at 10Mbps Half Duplex + * Default Value: 0 + */ + +ATL1E_PARAM(media_type, "MediaType Select"); + +/* Interrupt Moderate Timer in units of 2 us + * + * Valid Range: 10-65535 + * + * Default Value: 45000(90ms) + */ +#define INT_MOD_DEFAULT_CNT 100 /* 200us */ +#define INT_MOD_MAX_CNT 65000 +#define INT_MOD_MIN_CNT 50 +ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer"); + +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL + +#define FLASH_VENDOR_DEFAULT 0 +#define FLASH_VENDOR_MIN 0 +#define FLASH_VENDOR_MAX 2 + +struct atl1e_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl1e_opt_list { int i; char *str; } *p; + } l; + } arg; +}; + +static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct pci_dev *pdev) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + dev_info(&pdev->dev, "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + dev_info(&pdev->dev, "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + dev_info(&pdev->dev, "%s set to %i\n", opt->name, *value); + return 0; + } + break; + case list_option:{ + int i; + struct atl1e_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + dev_info(&pdev->dev, "%s\n", + ent->str); + return 0; + } + } + break; + } + default: + BUG(); + } + + dev_info(&pdev->dev, "Invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/* + * atl1e_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +void __devinit atl1e_check_options(struct atl1e_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int bd = adapter->bd_number; + if (bd >= ATL1E_MAX_NIC) { + dev_notice(&pdev->dev, "no configuration for board #%i\n", bd); + dev_notice(&pdev->dev, "Using defaults for all values\n"); + } + + { /* Transmit Ring Size */ + struct atl1e_option opt = { + .type = range_option, + .name = "Transmit Ddescription Count", + .err = "using default of " + __MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT), + .def = ATL1E_DEFAULT_TX_DESC_CNT, + .arg = { .r = { .min = ATL1E_MIN_TX_DESC_CNT, + .max = ATL1E_MAX_TX_DESC_CNT} } + }; + int val; + if (num_tx_desc_cnt > bd) { + val = tx_desc_cnt[bd]; + atl1e_validate_option(&val, &opt, pdev); + adapter->tx_ring.count = (u16) val & 0xFFFC; + } else + adapter->tx_ring.count = (u16)opt.def; + } + + { /* Receive Memory Block Count */ + struct atl1e_option opt = { + .type = range_option, + .name = "Memory size of rx buffer(KB)", + .err = "using default of " + __MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE), + .def = ATL1E_DEFAULT_RX_MEM_SIZE, + .arg = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE, + .max = ATL1E_MAX_RX_MEM_SIZE} } + }; + int val; + if (num_rx_mem_size > bd) { + val = rx_mem_size[bd]; + atl1e_validate_option(&val, &opt, pdev); + adapter->rx_ring.page_size = (u32)val * 1024; + } else { + adapter->rx_ring.page_size = (u32)opt.def * 1024; + } + } + + { /* Interrupt Moderate Timer */ + struct atl1e_option opt = { + .type = range_option, + .name = "Interrupt Moderate Timer", + .err = "using default of " + __MODULE_STRING(INT_MOD_DEFAULT_CNT), + .def = INT_MOD_DEFAULT_CNT, + .arg = { .r = { .min = INT_MOD_MIN_CNT, + .max = INT_MOD_MAX_CNT} } + } ; + int val; + if (num_int_mod_timer > bd) { + val = int_mod_timer[bd]; + atl1e_validate_option(&val, &opt, pdev); + adapter->hw.imt = (u16) val; + } else + adapter->hw.imt = (u16)(opt.def); + } + + { /* MediaType */ + struct atl1e_option opt = { + .type = range_option, + .name = "Speed/Duplex Selection", + .err = "using default of " + __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR), + .def = MEDIA_TYPE_AUTO_SENSOR, + .arg = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR, + .max = MEDIA_TYPE_10M_HALF} } + } ; + int val; + if (num_media_type > bd) { + val = media_type[bd]; + atl1e_validate_option(&val, &opt, pdev); + adapter->hw.media_type = (u16) val; + } else + adapter->hw.media_type = (u16)(opt.def); + + } +} -- 2.20.1