From a6a3f14035fe94c0925fea62f3d3a7a1ab44c1f1 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 8 Sep 2007 21:31:56 -0300 Subject: [PATCH] V4L/DVB (6199): cx23885: Changes to allow demodulators on each transport bus cx23885: Changes to allow demodulators on each transport bus. Signed-off-by: Steven Toth Reviewed-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 53 +++- drivers/media/video/cx23885/cx23885-core.c | 324 +++++++++----------- drivers/media/video/cx23885/cx23885-dvb.c | 4 +- drivers/media/video/cx23885/cx23885-reg.h | 16 +- drivers/media/video/cx23885/cx23885.h | 5 +- 5 files changed, 207 insertions(+), 195 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index cdda11ddf14..b9012acabb2 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -111,7 +111,7 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { .name = "DViCO FusionHDTV5 Express", - .portc = CX23885_MPEG_DVB, + .portb = CX23885_MPEG_DVB, }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -197,8 +197,43 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } +void cx23885_gpio_setup(struct cx23885_dev *dev) +{ + switch(dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* GPIO-0 cx24227 demodulator reset */ + cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + // FIXME: Analog requires the tuner is brought out of reset + break; + } +} + +int cx23885_ir_init(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* FIXME: Implement me */ + break; + } + + return 0; +} + void cx23885_card_setup(struct cx23885_dev *dev) { + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; + static u8 eeprom[256]; if (dev->i2c_bus[0].i2c_rc == 0) { @@ -215,6 +250,22 @@ void cx23885_card_setup(struct cx23885_dev *dev) hauppauge_eeprom(dev, eeprom+0x80); break; } + + switch (dev->board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + default: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + } + } /* ------------------------------------------------------------------ */ diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index bcba1926347..51879961e3e 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -604,24 +604,7 @@ void cx23885_reset(struct cx23885_dev *dev) cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH08 ], 128, 0); cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH09 ], 128, 0); - switch(dev->board) { - case CX23885_BOARD_HAUPPAUGE_HVR1250: - /* GPIO-0 cx24227 demodulator reset */ - dprintk( 1, "%s() Configuring HVR1250 GPIO's\n", __FUNCTION__); - cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ - break; - case CX23885_BOARD_HAUPPAUGE_HVR1800: - /* GPIO-0 656_CLK */ - /* GPIO-1 656_D0 */ - /* GPIO-2 8295A Reset */ - /* GPIO-3-10 cx23417 data0-7 */ - /* GPIO-11-14 cx23417 addr0-3 */ - /* GPIO-15-18 cx23417 READY, CS, RD, WR */ - /* GPIO-19 IR_RX */ - dprintk( 1, "%s() Configuring HVR1800 GPIO's\n", __FUNCTION__); - // FIXME: Analog requires the tuner is brought out of reset - break; - } + cx23885_gpio_setup(dev); } @@ -656,17 +639,68 @@ static void cx23885_timeout(unsigned long data); int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value); -static int cx23885_ir_init(struct cx23885_dev *dev) +static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno) { - dprintk(1, "%s()\n", __FUNCTION__); - - switch (dev->board) { - case CX23885_BOARD_HAUPPAUGE_HVR1250: - case CX23885_BOARD_HAUPPAUGE_HVR1800: - dprintk(1, "%s() FIXME - Implement IR support\n", __FUNCTION__); + dprintk(1, "%s(portno=%d)\n", __FUNCTION__, portno); + + /* Transport bus init dma queue - Common settings */ + port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ + port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */ + + spin_lock_init(&port->slock); + port->dev = dev; + port->nr = portno; + + INIT_LIST_HEAD(&port->mpegq.active); + INIT_LIST_HEAD(&port->mpegq.queued); + port->mpegq.timeout.function = cx23885_timeout; + port->mpegq.timeout.data = (unsigned long)port; + init_timer(&port->mpegq.timeout); + + switch(portno) { + case 1: + port->reg_gpcnt = VID_B_GPCNT; + port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; + port->reg_dma_ctl = VID_B_DMA_CTL; + port->reg_lngth = VID_B_LNGTH; + port->reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; + port->reg_gen_ctrl = VID_B_GEN_CTL; + port->reg_bd_pkt_status = VID_B_BD_PKT_STATUS; + port->reg_sop_status = VID_B_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_B_VLD_MISC; + port->reg_ts_clk_en = VID_B_TS_CLK_EN; + port->reg_src_sel = VID_B_SRC_SEL; + port->reg_ts_int_msk = VID_B_INT_MSK; + port->reg_ts_int_stat = VID_B_INT_STAT; + port->sram_chno = SRAM_CH03; /* VID_B */ + port->pci_irqmask = 0x02; /* VID_B bit1 */ + break; + case 2: + port->reg_gpcnt = VID_C_GPCNT; + port->reg_gpcnt_ctl = VID_C_GPCNT_CTL; + port->reg_dma_ctl = VID_C_DMA_CTL; + port->reg_lngth = VID_C_LNGTH; + port->reg_hw_sop_ctrl = VID_C_HW_SOP_CTL; + port->reg_gen_ctrl = VID_C_GEN_CTL; + port->reg_bd_pkt_status = VID_C_BD_PKT_STATUS; + port->reg_sop_status = VID_C_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_C_VLD_MISC; + port->reg_ts_clk_en = VID_C_TS_CLK_EN; + port->reg_src_sel = 0; + port->reg_ts_int_msk = VID_C_INT_MSK; + port->reg_ts_int_stat = VID_C_INT_STAT; + port->sram_chno = SRAM_CH06; /* VID_C */ + port->pci_irqmask = 0x04; /* VID_C bit2 */ break; + default: + BUG(); } + cx23885_risc_stopper(dev->pci, &port->mpegq.stopper, + port->reg_dma_ctl, port->dma_ctl_val, 0x00); + return 0; } @@ -746,16 +780,11 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->i2c_bus[2].reg_wdata = I2C3_WDATA; dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */ - /* Transport bus init dma queue */ - spin_lock_init(&dev->ts2.slock); - dev->ts2.dev = dev; - dev->ts2.nr = 2; + if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + cx23885_init_tsport(dev, &dev->ts1, 1); - INIT_LIST_HEAD(&dev->ts2.mpegq.active); - INIT_LIST_HEAD(&dev->ts2.mpegq.queued); - dev->ts2.mpegq.timeout.function = cx23885_timeout; - dev->ts2.mpegq.timeout.data = (unsigned long)&dev->ts2; - init_timer(&dev->ts2.mpegq.timeout); + if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + cx23885_init_tsport(dev, &dev->ts2, 2); if (get_resources(dev) < 0) { printk(KERN_ERR "CORE %s No more PCIe resources for " @@ -788,71 +817,21 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_i2c_register(&dev->i2c_bus[1]); cx23885_i2c_register(&dev->i2c_bus[2]); cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); - cx23885_card_setup(dev); cx23885_ir_init(dev); - switch (dev->board) { - case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: - dev->ts2.reg_gpcnt = VID_B_GPCNT; - dev->ts2.reg_gpcnt_ctl = VID_B_GPCNT_CTL; - dev->ts2.reg_dma_ctl = VID_B_DMA_CTL; - dev->ts2.reg_lngth = VID_B_LNGTH; - dev->ts2.reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; - dev->ts2.reg_gen_ctrl = VID_B_GEN_CTL; - dev->ts2.reg_bd_pkt_status = VID_B_BD_PKT_STATUS; - dev->ts2.reg_sop_status = VID_B_SOP_STATUS; - dev->ts2.reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; - dev->ts2.reg_vld_misc = VID_B_VLD_MISC; - dev->ts2.reg_ts_clk_en = VID_B_TS_CLK_EN; - dev->ts2.reg_ts_int_msk = VID_B_INT_MSK; - dev->ts2.reg_src_sel = VID_B_SRC_SEL; - - // FIXME: Make this board specific - dev->ts2.pci_irqmask = 0x02; /* TS Port 2 bit */ - dev->ts2.dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ - dev->ts2.ts_int_msk_val = 0x1111; /* TS port bits for RISC */ - dev->ts2.gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ - dev->ts2.ts_clk_en_val = 0x1; /* Enable TS_CLK */ - dev->ts2.src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; - - // Drive this from cards.c (portb/c) and move it outside of this switch - dev->ts2.sram_chno = SRAM_CH03; - break; - default: - dev->ts2.reg_gpcnt = VID_C_GPCNT; - dev->ts2.reg_gpcnt_ctl = VID_C_GPCNT_CTL; - dev->ts2.reg_dma_ctl = VID_C_DMA_CTL; - dev->ts2.reg_lngth = VID_C_LNGTH; - dev->ts2.reg_hw_sop_ctrl = VID_C_HW_SOP_CTL; - dev->ts2.reg_gen_ctrl = VID_C_GEN_CTL; - dev->ts2.reg_bd_pkt_status = VID_C_BD_PKT_STATUS; - dev->ts2.reg_sop_status = VID_C_SOP_STATUS; - dev->ts2.reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT; - dev->ts2.reg_vld_misc = VID_C_VLD_MISC; - dev->ts2.reg_ts_clk_en = VID_C_TS_CLK_EN; - dev->ts2.reg_ts_int_msk = VID_C_INT_MSK; - dev->ts2.reg_src_sel = 0; - - // FIXME: Make this board specific - dev->ts2.pci_irqmask = 0x04; /* TS Port 2 bit */ - dev->ts2.dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ - dev->ts2.ts_int_msk_val = 0x1111; /* TS port bits for RISC */ - dev->ts2.gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ - dev->ts2.ts_clk_en_val = 0x1; /* Enable TS_CLK */ - dev->ts2.src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; - - // Drive this from cards.c (portb/c) and move it outside of this switch - dev->ts2.sram_chno = SRAM_CH06; + if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + if (cx23885_dvb_register(&dev->ts1) < 0) { + printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", + __FUNCTION__); + } } - cx23885_risc_stopper(dev->pci, &dev->ts2.mpegq.stopper, - dev->ts2.reg_dma_ctl, dev->ts2.dma_ctl_val, 0x00); - - // FIXME: This should only be called if ts2 is being used, driven by cards.c - if (cx23885_dvb_register(&dev->ts2) < 0) { - printk(KERN_ERR "%s() Failed to register dvb adapters\n", - __FUNCTION__); + if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + if (cx23885_dvb_register(&dev->ts2) < 0) { + printk(KERN_ERR "%s() Failed to register dvb adapters on VID_C\n", + __FUNCTION__); + } } return 0; @@ -870,7 +849,12 @@ void cx23885_dev_unregister(struct cx23885_dev *dev) if (!atomic_dec_and_test(&dev->refcount)) return; - cx23885_dvb_unregister(&dev->ts2); + if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts1); + + if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts2); + cx23885_i2c_unregister(&dev->i2c_bus[2]); cx23885_i2c_unregister(&dev->i2c_bus[1]); cx23885_i2c_unregister(&dev->i2c_bus[0]); @@ -1289,14 +1273,66 @@ static void cx23885_timeout(unsigned long data) do_cancel_buffers(port, "timeout", 1); } +static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) +{ + struct cx23885_dev *dev = port->dev; + int handled = 0; + u32 count; + + if ( (status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_BAD_PKT) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) + { + if (status & VID_BC_MSK_OPC_ERR) + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", VID_BC_MSK_OPC_ERR); + if (status & VID_BC_MSK_BAD_PKT) + dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", VID_BC_MSK_BAD_PKT); + if (status & VID_BC_MSK_SYNC) + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", VID_BC_MSK_SYNC); + if (status & VID_BC_MSK_OF) + dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", VID_BC_MSK_OF); + + printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); + + } else if (status & VID_BC_MSK_RISCI1) { + + dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1); + + spin_lock(&port->slock); + count = cx_read(port->reg_gpcnt); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + + } else if (status & VID_BC_MSK_RISCI2) { + + dprintk(7, " (RISCI2 0x%08x)\n", VID_BC_MSK_RISCI2); + + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + static irqreturn_t cx23885_irq(int irq, void *dev_id) { struct cx23885_dev *dev = dev_id; - struct cx23885_tsport *port = &dev->ts2; + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; u32 pci_status, pci_mask; u32 ts1_status, ts1_mask; u32 ts2_status, ts2_mask; - int count = 0, handled = 0; + int ts1_count = 0, ts2_count = 0, handled = 0; pci_status = cx_read(PCI_INT_STAT); pci_mask = cx_read(PCI_INT_MSK); @@ -1308,10 +1344,11 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) if ( (pci_status == 0) && (ts2_status == 0) && (ts1_status == 0) ) goto out; - count = cx_read(port->reg_gpcnt); + ts1_count = cx_read(ts1->reg_gpcnt); + ts2_count = cx_read(ts2->reg_gpcnt); dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", pci_status, pci_mask ); - dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", ts1_status, ts1_mask, count ); - dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, count ); + dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", ts1_status, ts1_mask, ts1_count ); + dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, ts2_count ); if ( (pci_status & PCI_MSK_RISC_RD) || (pci_status & PCI_MSK_RISC_WR) || @@ -1348,90 +1385,11 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) } - if ( (ts1_status & VID_B_MSK_OPC_ERR) || - (ts1_status & VID_B_MSK_BAD_PKT) || - (ts1_status & VID_B_MSK_SYNC) || - (ts1_status & VID_B_MSK_OF)) - { - if (ts1_status & VID_B_MSK_OPC_ERR) - dprintk(7, " (VID_B_MSK_OPC_ERR 0x%08x)\n", VID_B_MSK_OPC_ERR); - if (ts1_status & VID_B_MSK_BAD_PKT) - dprintk(7, " (VID_B_MSK_BAD_PKT 0x%08x)\n", VID_B_MSK_BAD_PKT); - if (ts1_status & VID_B_MSK_SYNC) - dprintk(7, " (VID_B_MSK_SYNC 0x%08x)\n", VID_B_MSK_SYNC); - if (ts1_status & VID_B_MSK_OF) - dprintk(7, " (VID_B_MSK_OF 0x%08x)\n", VID_B_MSK_OF); + if (ts1_status) + handled += cx23885_irq_ts(ts1, ts1_status); - printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); - - cx_clear(port->reg_dma_ctl, port->dma_ctl_val); - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); - - } else if (ts1_status & VID_B_MSK_RISCI1) { - - dprintk(7, " (RISCI1 0x%08x)\n", VID_B_MSK_RISCI1); - - spin_lock(&port->slock); - count = cx_read(port->reg_gpcnt); - cx23885_wakeup(port, &port->mpegq, count); - spin_unlock(&port->slock); - - } else if (ts1_status & VID_B_MSK_RISCI2) { - - dprintk(7, " (RISCI2 0x%08x)\n", VID_B_MSK_RISCI2); - - spin_lock(&port->slock); - cx23885_restart_queue(port, &port->mpegq); - spin_unlock(&port->slock); - - } - if (ts1_status) { - cx_write(VID_B_INT_STAT, ts1_status); - handled = 1; - } - - if ( (ts2_status & VID_C_MSK_OPC_ERR) || - (ts2_status & VID_C_MSK_BAD_PKT) || - (ts2_status & VID_C_MSK_SYNC) || - (ts2_status & VID_C_MSK_OF)) - { - if (ts2_status & VID_C_MSK_OPC_ERR) - dprintk(7, " (VID_C_MSK_OPC_ERR 0x%08x)\n", VID_C_MSK_OPC_ERR); - if (ts2_status & VID_C_MSK_BAD_PKT) - dprintk(7, " (VID_C_MSK_BAD_PKT 0x%08x)\n", VID_C_MSK_BAD_PKT); - if (ts2_status & VID_C_MSK_SYNC) - dprintk(7, " (VID_C_MSK_SYNC 0x%08x)\n", VID_C_MSK_SYNC); - if (ts2_status & VID_C_MSK_OF) - dprintk(7, " (VID_C_MSK_OF 0x%08x)\n", VID_C_MSK_OF); - - printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); - - cx_clear(port->reg_dma_ctl, port->dma_ctl_val); - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); - - } else if (ts2_status & VID_C_MSK_RISCI1) { - - dprintk(7, " (RISCI1 0x%08x)\n", VID_C_MSK_RISCI1); - - spin_lock(&port->slock); - count = cx_read(port->reg_gpcnt); - cx23885_wakeup(port, &port->mpegq, count); - spin_unlock(&port->slock); - - } else if (ts2_status & VID_C_MSK_RISCI2) { - - dprintk(7, " (RISCI2 0x%08x)\n", VID_C_MSK_RISCI2); - - spin_lock(&port->slock); - cx23885_restart_queue(port, &port->mpegq); - spin_unlock(&port->slock); - - } - - if (ts2_status) { - cx_write(VID_C_INT_STAT, ts2_status); - handled = 1; - } + if (ts2_status) + handled += cx23885_irq_ts(ts2, ts2_status); if (handled) cx_write(PCI_INT_STAT, pci_status); diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0ace919195d..e0dc1495b8c 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -160,6 +160,7 @@ static int dvb_register(struct cx23885_tsport *port) } /* Put the analog decoder in standby to keep it quiet */ + /* Assumption here: analog decoder is only on i2c bus 0 */ cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); /* register everything */ @@ -180,8 +181,6 @@ int cx23885_dvb_register(struct cx23885_tsport *port) dev->pci_slot); err = -ENODEV; - if (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) - goto fail_core; /* dvb stuff */ printk("%s: cx23885 based dvb card\n", dev->name); @@ -192,7 +191,6 @@ int cx23885_dvb_register(struct cx23885_tsport *port) if (err != 0) printk("%s() dvb_register failed err = %d\n", __FUNCTION__, err); - fail_core: return err; } diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index 3f1afbeea77..162169f9091 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -250,14 +250,16 @@ Channel manager Data Structure entry = 20 DWORD #define VID_C_MSK_OF (1 << 8) #define VID_C_MSK_RISCI2 (1 << 4) #define VID_C_MSK_RISCI1 1 -#define VID_C_INT_MSK 0x00040040 -#define VID_C_MSK_BAD_PKT (1 << 20) -#define VID_C_MSK_OPC_ERR (1 << 16) -#define VID_C_MSK_SYNC (1 << 12) -#define VID_C_MSK_OF (1 << 8) -#define VID_C_MSK_RISCI2 (1 << 4) -#define VID_C_MSK_RISCI1 1 +/* A superset for testing purposes */ +#define VID_BC_MSK_BAD_PKT (1 << 20) +#define VID_BC_MSK_OPC_ERR (1 << 16) +#define VID_BC_MSK_SYNC (1 << 12) +#define VID_BC_MSK_OF (1 << 8) +#define VID_BC_MSK_RISCI2 (1 << 4) +#define VID_BC_MSK_RISCI1 1 + +#define VID_C_INT_MSK 0x00040040 #define VID_C_INT_STAT 0x00040044 #define VID_C_INT_MSTAT 0x00040048 #define VID_C_INT_SSTAT 0x0004004C diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 4933274b1e3..45c47cd6070 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -168,6 +168,7 @@ struct cx23885_tsport { u32 reg_vld_misc; u32 reg_ts_clk_en; u32 reg_ts_int_msk; + u32 reg_ts_int_stat; u32 reg_src_sel; /* Default register vals */ @@ -201,7 +202,7 @@ struct cx23885_dev { unsigned int board; char name[32]; - struct cx23885_tsport ts2; + struct cx23885_tsport ts1, ts2; /* sram configuration */ struct sram_channel *sram_channels; @@ -269,6 +270,8 @@ extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; extern void cx23885_card_list(struct cx23885_dev *dev); +extern int cx23885_ir_init(struct cx23885_dev *dev); +extern void cx23885_gpio_setup(struct cx23885_dev *dev); extern void cx23885_card_setup(struct cx23885_dev *dev); extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev); -- 2.20.1