From a6044e23b784544fe567db75dbf9c4f684bd6d5b Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 20 Dec 2010 11:34:20 -0800 Subject: [PATCH] drm/i915: support overclocking on Sandy Bridge In some configuration, the PCU may allow us to overclock the GPU. Check for this case and adjust the max frequency as appropriate. Also initialize the min/max frequencies to default values as indicated by hardware. Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 677eca65a4bc..1bc816f3934b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3240,6 +3240,7 @@ #define GEN6_PCODE_MAILBOX 0x138124 #define GEN6_PCODE_READY (1<<31) +#define GEN6_READ_OC_PARAMS 0xc #define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x9 #define GEN6_PCODE_DATA 0x138128 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bc829bbc14c8..efa88551cbe4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6147,6 +6147,10 @@ void intel_init_emon(struct drm_device *dev) void gen6_enable_rps(struct drm_i915_private *dev_priv) { + u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); + u32 pcu_mbox; + int cur_freq, min_freq, max_freq; int i; /* Here begins a magic sequence of register writes to enable @@ -6218,6 +6222,29 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) 500)) DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); + min_freq = (rp_state_cap & 0xff0000) >> 16; + max_freq = rp_state_cap & 0xff; + cur_freq = (gt_perf_status & 0xff00) >> 8; + + /* Check for overclock support */ + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) + DRM_ERROR("timeout waiting for pcode mailbox to become idle\n"); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS); + pcu_mbox = I915_READ(GEN6_PCODE_DATA); + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) + DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); + if (pcu_mbox & (1<<31)) { /* OC supported */ + max_freq = pcu_mbox & 0xff; + DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 100); + } + + /* In units of 100MHz */ + dev_priv->max_delay = max_freq; + dev_priv->min_delay = min_freq; + dev_priv->cur_delay = cur_freq; + /* requires MSI enabled */ I915_WRITE(GEN6_PMIER, GEN6_PM_MBOX_EVENT | -- 2.20.1