From a50d1fd4525162732b45db7a372e868933746a4e Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 24 Sep 2012 14:04:24 +0530 Subject: [PATCH] ath9k_hw: fix BT sleep state on chip wakeup Whenever both WLAN and BT in/out sleep mode, sometimes WLAN is not able to take back the shared LNA control after resumes from sleep mode. The idea is that for WLAN to check if BT owns LNA control and BT is in sleep mode when WLAN just resumes from sleep mode. If the condition is true, do a BTCOEX_RC_WARM_RESET for WLAN to take back the control of shared LNA. Now the issue is the BT sleep value read from MCI register is overlooked by assigning u32 into u8. Hence the above condition never be met so that WLAN used to report beacon losses and frequent connection drops. Signed-off-by: Rajkumar Manoharan Tested-by: Paul Stewart Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_mci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 8d8df4b2c386..8dbb60b53f1a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1289,7 +1289,7 @@ void ar9003_mci_set_power_awake(struct ath_hw *ah) } REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18))); lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3; - bt_sleep = REG_READ(ah, AR_MCI_RX_STATUS) & AR_MCI_RX_REMOTE_SLEEP; + bt_sleep = MS(REG_READ(ah, AR_MCI_RX_STATUS), AR_MCI_RX_REMOTE_SLEEP); REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2); REG_WRITE(ah, AR_DIAG_SW, diag_sw); -- 2.20.1