From a505bfb10a0fc6f4342a2521b899d61ff2461e72 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Jul 2015 16:35:26 +0100 Subject: [PATCH] regulator: pwm-regulator: Ensure headings aren't confused with properties We're using capitalisation and removing the '-' to mitigate confusion. Signed-off-by: Lee Jones Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index 892b36655b3d..23b47720b2e4 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -3,7 +3,7 @@ Bindings for the Generic PWM Regulator Currently supports 2 modes of operation: -voltage-table: When in this mode, a voltage table (See below) of +Voltage Table: When in this mode, a voltage table (See below) of predefined voltage <=> duty-cycle values must be provided via DT. Limitations are that the regulator can only operate at the voltages supplied in the table. @@ -13,7 +13,7 @@ voltage-table: When in this mode, a voltage table (See below) of the user if the assumptions made in continuous-voltage mode do not reign true. -continuous-voltage: This mode uses the regulator's maximum and minimum +Continuous Voltage: This mode uses the regulator's maximum and minimum supplied voltages specified in the regulator-{min,max}-microvolt properties to calculate appropriate duty-cycle values. This allows for a much -- 2.20.1