From a49976d14f780942dafafbbf16f891c27d385ea0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 8 Jun 2015 09:49:11 +0200 Subject: [PATCH] x86/asm/entry/32: Clean up entry_32.S Make the 32-bit syscall entry code a bit more readable: - use consistent assembly coding style similar to entry_64.S - remove old comments that are not true anymore - eliminate whitespace noise - use consistent vertical spacing - fix various comments No code changed: # arch/x86/entry/entry_32.o: text data bss dec hex filename 6025 0 0 6025 1789 entry_32.o.before 6025 0 0 6025 1789 entry_32.o.after md5: f3fa16b2b0dca804f052deb6b30ba6cb entry_32.o.before.asm f3fa16b2b0dca804f052deb6b30ba6cb entry_32.o.after.asm Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_32.S | 1141 ++++++++++++++++++------------------- 1 file changed, 570 insertions(+), 571 deletions(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index d59461032625..edd7aadfacfa 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -1,23 +1,12 @@ /* + * Copyright (C) 1991,1992 Linus Torvalds * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - * I changed all the .align's to 4 (16 byte alignment), as that's faster - * on a 486. + * entry_32.S contains the system-call and low-level fault and trap handling routines. * * Stack layout in 'syscall_exit': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be - * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace needs to have all registers on the stack. + * If the order here is changed, it needs to be + * updated in fork.c:copy_process(), signal.c:do_signal(), * ptrace.c and ptrace.h * * 0(%esp) - %ebx @@ -37,8 +26,6 @@ * 38(%esp) - %eflags * 3C(%esp) - %oldesp * 40(%esp) - %oldss - * - * "current" is in register %ebx during any slow entries. */ #include @@ -61,11 +48,11 @@ /* Avoid __ASSEMBLER__'ifying just for this. */ #include #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define __AUDIT_ARCH_LE 0x40000000 +#define __AUDIT_ARCH_LE 0x40000000 #ifndef CONFIG_AUDITSYSCALL -#define sysenter_audit syscall_trace_entry -#define sysexit_audit syscall_exit_work +# define sysenter_audit syscall_trace_entry +# define sysexit_audit syscall_exit_work #endif .section .entry.text, "ax" @@ -84,16 +71,16 @@ */ #ifdef CONFIG_PREEMPT -#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF +# define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF #else -#define preempt_stop(clobbers) -#define resume_kernel restore_all +# define preempt_stop(clobbers) +# define resume_kernel restore_all #endif .macro TRACE_IRQS_IRET #ifdef CONFIG_TRACE_IRQFLAGS - testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off? - jz 1f + testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off? + jz 1f TRACE_IRQS_ON 1: #endif @@ -112,10 +99,10 @@ /* unfortunately push/pop can't be no-op */ .macro PUSH_GS - pushl $0 + pushl $0 .endm .macro POP_GS pop=0 - addl $(4 + \pop), %esp + addl $(4 + \pop), %esp .endm .macro POP_GS_EX .endm @@ -135,119 +122,119 @@ #else /* CONFIG_X86_32_LAZY_GS */ .macro PUSH_GS - pushl %gs + pushl %gs .endm .macro POP_GS pop=0 -98: popl %gs +98: popl %gs .if \pop <> 0 add $\pop, %esp .endif .endm .macro POP_GS_EX .pushsection .fixup, "ax" -99: movl $0, (%esp) - jmp 98b +99: movl $0, (%esp) + jmp 98b .popsection - _ASM_EXTABLE(98b,99b) + _ASM_EXTABLE(98b, 99b) .endm .macro PTGS_TO_GS -98: mov PT_GS(%esp), %gs +98: mov PT_GS(%esp), %gs .endm .macro PTGS_TO_GS_EX .pushsection .fixup, "ax" -99: movl $0, PT_GS(%esp) - jmp 98b +99: movl $0, PT_GS(%esp) + jmp 98b .popsection - _ASM_EXTABLE(98b,99b) + _ASM_EXTABLE(98b, 99b) .endm .macro GS_TO_REG reg - movl %gs, \reg + movl %gs, \reg .endm .macro REG_TO_PTGS reg - movl \reg, PT_GS(%esp) + movl \reg, PT_GS(%esp) .endm .macro SET_KERNEL_GS reg - movl $(__KERNEL_STACK_CANARY), \reg - movl \reg, %gs + movl $(__KERNEL_STACK_CANARY), \reg + movl \reg, %gs .endm -#endif /* CONFIG_X86_32_LAZY_GS */ +#endif /* CONFIG_X86_32_LAZY_GS */ .macro SAVE_ALL cld PUSH_GS - pushl %fs - pushl %es - pushl %ds - pushl %eax - pushl %ebp - pushl %edi - pushl %esi - pushl %edx - pushl %ecx - pushl %ebx - movl $(__USER_DS), %edx - movl %edx, %ds - movl %edx, %es - movl $(__KERNEL_PERCPU), %edx - movl %edx, %fs + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx + movl $(__USER_DS), %edx + movl %edx, %ds + movl %edx, %es + movl $(__KERNEL_PERCPU), %edx + movl %edx, %fs SET_KERNEL_GS %edx .endm .macro RESTORE_INT_REGS - popl %ebx - popl %ecx - popl %edx - popl %esi - popl %edi - popl %ebp - popl %eax + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax .endm .macro RESTORE_REGS pop=0 RESTORE_INT_REGS -1: popl %ds -2: popl %es -3: popl %fs +1: popl %ds +2: popl %es +3: popl %fs POP_GS \pop .pushsection .fixup, "ax" -4: movl $0, (%esp) - jmp 1b -5: movl $0, (%esp) - jmp 2b -6: movl $0, (%esp) - jmp 3b +4: movl $0, (%esp) + jmp 1b +5: movl $0, (%esp) + jmp 2b +6: movl $0, (%esp) + jmp 3b .popsection - _ASM_EXTABLE(1b,4b) - _ASM_EXTABLE(2b,5b) - _ASM_EXTABLE(3b,6b) + _ASM_EXTABLE(1b, 4b) + _ASM_EXTABLE(2b, 5b) + _ASM_EXTABLE(3b, 6b) POP_GS_EX .endm ENTRY(ret_from_fork) - pushl %eax - call schedule_tail + pushl %eax + call schedule_tail GET_THREAD_INFO(%ebp) - popl %eax - pushl $0x0202 # Reset kernel eflags + popl %eax + pushl $0x0202 # Reset kernel eflags popfl - jmp syscall_exit + jmp syscall_exit END(ret_from_fork) ENTRY(ret_from_kernel_thread) - pushl %eax - call schedule_tail + pushl %eax + call schedule_tail GET_THREAD_INFO(%ebp) - popl %eax - pushl $0x0202 # Reset kernel eflags + popl %eax + pushl $0x0202 # Reset kernel eflags popfl - movl PT_EBP(%esp),%eax - call *PT_EBX(%esp) - movl $0,PT_EAX(%esp) - jmp syscall_exit + movl PT_EBP(%esp), %eax + call *PT_EBX(%esp) + movl $0, PT_EAX(%esp) + jmp syscall_exit ENDPROC(ret_from_kernel_thread) /* @@ -264,62 +251,65 @@ ret_from_exception: ret_from_intr: GET_THREAD_INFO(%ebp) #ifdef CONFIG_VM86 - movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS - movb PT_CS(%esp), %al - andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax + movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS + movb PT_CS(%esp), %al + andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax #else /* * We can be coming here from child spawned by kernel_thread(). */ - movl PT_CS(%esp), %eax - andl $SEGMENT_RPL_MASK, %eax + movl PT_CS(%esp), %eax + andl $SEGMENT_RPL_MASK, %eax #endif - cmpl $USER_RPL, %eax - jb resume_kernel # not returning to v8086 or userspace + cmpl $USER_RPL, %eax + jb resume_kernel # not returning to v8086 or userspace ENTRY(resume_userspace) LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done on - # int/exception return? - jne work_pending - jmp restore_all + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done on + # int/exception return? + jne work_pending + jmp restore_all END(ret_from_exception) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) DISABLE_INTERRUPTS(CLBR_ANY) need_resched: - cmpl $0,PER_CPU_VAR(__preempt_count) - jnz restore_all - testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ? - jz restore_all - call preempt_schedule_irq - jmp need_resched + cmpl $0, PER_CPU_VAR(__preempt_count) + jnz restore_all + testl $X86_EFLAGS_IF, PT_EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_all + call preempt_schedule_irq + jmp need_resched END(resume_kernel) #endif -/* SYSENTER_RETURN points to after the "sysenter" instruction in - the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ +/* + * SYSENTER_RETURN points to after the SYSENTER instruction + * in the vsyscall page. See vsyscall-sysentry.S, which defines + * the symbol. + */ - # sysenter call handler stub + # SYSENTER call handler stub ENTRY(entry_SYSENTER_32) - movl TSS_sysenter_sp0(%esp),%esp + movl TSS_sysenter_sp0(%esp), %esp sysenter_past_esp: /* * Interrupts are disabled here, but we can't trace it until * enough kernel state to call TRACE_IRQS_OFF can be called - but * we immediately enable interrupts at that point anyway. */ - pushl $__USER_DS - pushl %ebp + pushl $__USER_DS + pushl %ebp pushfl - orl $X86_EFLAGS_IF, (%esp) - pushl $__USER_CS + orl $X86_EFLAGS_IF, (%esp) + pushl $__USER_CS /* * Push current_thread_info()->sysenter_return to the stack. * A tiny bit of offset fixup is necessary: TI_sysenter_return @@ -328,9 +318,9 @@ sysenter_past_esp: * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack; * and THREAD_SIZE takes us to the bottom. */ - pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) + pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - pushl %eax + pushl %eax SAVE_ALL ENABLE_INTERRUPTS(CLBR_NONE) @@ -338,132 +328,134 @@ sysenter_past_esp: * Load the potential sixth argument from user stack. * Careful about security. */ - cmpl $__PAGE_OFFSET-3,%ebp - jae syscall_fault + cmpl $__PAGE_OFFSET-3, %ebp + jae syscall_fault ASM_STAC -1: movl (%ebp),%ebp +1: movl (%ebp), %ebp ASM_CLAC - movl %ebp,PT_EBP(%esp) - _ASM_EXTABLE(1b,syscall_fault) + movl %ebp, PT_EBP(%esp) + _ASM_EXTABLE(1b, syscall_fault) GET_THREAD_INFO(%ebp) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) - jnz sysenter_audit + testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp) + jnz sysenter_audit sysenter_do_call: - cmpl $(NR_syscalls), %eax - jae sysenter_badsys - call *sys_call_table(,%eax,4) + cmpl $(NR_syscalls), %eax + jae sysenter_badsys + call *sys_call_table(, %eax, 4) sysenter_after_call: - movl %eax,PT_EAX(%esp) + movl %eax, PT_EAX(%esp) LOCKDEP_SYS_EXIT DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $_TIF_ALLWORK_MASK, %ecx - jnz sysexit_audit + movl TI_flags(%ebp), %ecx + testl $_TIF_ALLWORK_MASK, %ecx + jnz sysexit_audit sysenter_exit: /* if something modifies registers it must also disable sysexit */ - movl PT_EIP(%esp), %edx - movl PT_OLDESP(%esp), %ecx - xorl %ebp,%ebp + movl PT_EIP(%esp), %edx + movl PT_OLDESP(%esp), %ecx + xorl %ebp, %ebp TRACE_IRQS_ON -1: mov PT_FS(%esp), %fs +1: mov PT_FS(%esp), %fs PTGS_TO_GS ENABLE_INTERRUPTS_SYSEXIT #ifdef CONFIG_AUDITSYSCALL sysenter_audit: - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) - jnz syscall_trace_entry - /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */ - movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */ - /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */ - pushl PT_ESI(%esp) /* a3: 5th arg */ - pushl PT_EDX+4(%esp) /* a2: 4th arg */ - call __audit_syscall_entry - popl %ecx /* get that remapped edx off the stack */ - popl %ecx /* get that remapped esi off the stack */ - movl PT_EAX(%esp),%eax /* reload syscall number */ - jmp sysenter_do_call + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), TI_flags(%ebp) + jnz syscall_trace_entry + /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */ + movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */ + /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */ + pushl PT_ESI(%esp) /* a3: 5th arg */ + pushl PT_EDX+4(%esp) /* a2: 4th arg */ + call __audit_syscall_entry + popl %ecx /* get that remapped edx off the stack */ + popl %ecx /* get that remapped esi off the stack */ + movl PT_EAX(%esp), %eax /* reload syscall number */ + jmp sysenter_do_call sysexit_audit: - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx - jnz syscall_exit_work + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx + jnz syscall_exit_work TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) - movl %eax,%edx /* second arg, syscall return value */ - cmpl $-MAX_ERRNO,%eax /* is it an error ? */ - setbe %al /* 1 if so, 0 if not */ - movzbl %al,%eax /* zero-extend that */ - call __audit_syscall_exit + movl %eax, %edx /* second arg, syscall return value */ + cmpl $-MAX_ERRNO, %eax /* is it an error ? */ + setbe %al /* 1 if so, 0 if not */ + movzbl %al, %eax /* zero-extend that */ + call __audit_syscall_exit DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx - jnz syscall_exit_work - movl PT_EAX(%esp),%eax /* reload syscall return value */ - jmp sysenter_exit + movl TI_flags(%ebp), %ecx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx + jnz syscall_exit_work + movl PT_EAX(%esp), %eax /* reload syscall return value */ + jmp sysenter_exit #endif -.pushsection .fixup,"ax" -2: movl $0,PT_FS(%esp) - jmp 1b +.pushsection .fixup, "ax" +2: movl $0, PT_FS(%esp) + jmp 1b .popsection - _ASM_EXTABLE(1b,2b) + _ASM_EXTABLE(1b, 2b) PTGS_TO_GS_EX ENDPROC(entry_SYSENTER_32) # system call handler stub ENTRY(entry_INT80_32) ASM_CLAC - pushl %eax # save orig_eax + pushl %eax # save orig_eax SAVE_ALL GET_THREAD_INFO(%ebp) - # system call tracing in operation / emulation - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) - jnz syscall_trace_entry - cmpl $(NR_syscalls), %eax - jae syscall_badsys + # system call tracing in operation / emulation + testl $_TIF_WORK_SYSCALL_ENTRY, TI_flags(%ebp) + jnz syscall_trace_entry + cmpl $(NR_syscalls), %eax + jae syscall_badsys syscall_call: - call *sys_call_table(,%eax,4) + call *sys_call_table(, %eax, 4) syscall_after_call: - movl %eax,PT_EAX(%esp) # store the return value + movl %eax, PT_EAX(%esp) # store the return value syscall_exit: LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - testl $_TIF_ALLWORK_MASK, %ecx # current->work - jnz syscall_exit_work + movl TI_flags(%ebp), %ecx + testl $_TIF_ALLWORK_MASK, %ecx # current->work + jnz syscall_exit_work restore_all: TRACE_IRQS_IRET restore_all_notrace: #ifdef CONFIG_X86_ESPFIX32 - movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS - # Warning: PT_OLDSS(%esp) contains the wrong/random values if we - # are returning to the kernel. - # See comments in process.c:copy_thread() for details. - movb PT_OLDSS(%esp), %ah - movb PT_CS(%esp), %al - andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax - cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax - je ldt_ss # returning to user-space with LDT SS + movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS + /* + * Warning: PT_OLDSS(%esp) contains the wrong/random values if we + * are returning to the kernel. + * See comments in process.c:copy_thread() for details. + */ + movb PT_OLDSS(%esp), %ah + movb PT_CS(%esp), %al + andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax + je ldt_ss # returning to user-space with LDT SS #endif restore_nocheck: - RESTORE_REGS 4 # skip orig_eax/error_code + RESTORE_REGS 4 # skip orig_eax/error_code irq_return: INTERRUPT_RETURN -.section .fixup,"ax" -ENTRY(iret_exc) - pushl $0 # no error code - pushl $do_iret_error - jmp error_code +.section .fixup, "ax" +ENTRY(iret_exc ) + pushl $0 # no error code + pushl $do_iret_error + jmp error_code .previous - _ASM_EXTABLE(irq_return,iret_exc) + _ASM_EXTABLE(irq_return, iret_exc) #ifdef CONFIG_X86_ESPFIX32 ldt_ss: @@ -476,8 +468,8 @@ ldt_ss: * is still available to implement the setting of the high * 16-bits in the INTERRUPT_RETURN paravirt-op. */ - cmpl $0, pv_info+PARAVIRT_enabled - jne restore_nocheck + cmpl $0, pv_info+PARAVIRT_enabled + jne restore_nocheck #endif /* @@ -492,21 +484,23 @@ ldt_ss: * a base address that matches for the difference. */ #define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8) - mov %esp, %edx /* load kernel esp */ - mov PT_OLDESP(%esp), %eax /* load userspace esp */ - mov %dx, %ax /* eax: new kernel esp */ - sub %eax, %edx /* offset (low word is 0) */ + mov %esp, %edx /* load kernel esp */ + mov PT_OLDESP(%esp), %eax /* load userspace esp */ + mov %dx, %ax /* eax: new kernel esp */ + sub %eax, %edx /* offset (low word is 0) */ shr $16, %edx - mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ - mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ - pushl $__ESPFIX_SS - pushl %eax /* new kernel esp */ - /* Disable interrupts, but do not irqtrace this section: we + mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ + mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ + pushl $__ESPFIX_SS + pushl %eax /* new kernel esp */ + /* + * Disable interrupts, but do not irqtrace this section: we * will soon execute iret and the tracer was already set to - * the irqstate after the iret */ + * the irqstate after the IRET: + */ DISABLE_INTERRUPTS(CLBR_EAX) - lss (%esp), %esp /* switch to espfix segment */ - jmp restore_nocheck + lss (%esp), %esp /* switch to espfix segment */ + jmp restore_nocheck #endif ENDPROC(entry_INT80_32) @@ -514,93 +508,93 @@ ENDPROC(entry_INT80_32) ALIGN work_pending: testb $_TIF_NEED_RESCHED, %cl - jz work_notifysig + jz work_notifysig work_resched: - call schedule + call schedule LOCKDEP_SYS_EXIT - DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt - # setting need_resched or sigpending - # between sampling and the iret + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret TRACE_IRQS_OFF - movl TI_flags(%ebp), %ecx - andl $_TIF_WORK_MASK, %ecx # is there any work to be done other - # than syscall tracing? - jz restore_all + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done other + # than syscall tracing? + jz restore_all testb $_TIF_NEED_RESCHED, %cl - jnz work_resched + jnz work_resched -work_notifysig: # deal with pending signals and - # notify-resume requests +work_notifysig: # deal with pending signals and + # notify-resume requests #ifdef CONFIG_VM86 - testl $X86_EFLAGS_VM, PT_EFLAGS(%esp) - movl %esp, %eax - jnz work_notifysig_v86 # returning to kernel-space or - # vm86-space + testl $X86_EFLAGS_VM, PT_EFLAGS(%esp) + movl %esp, %eax + jnz work_notifysig_v86 # returning to kernel-space or + # vm86-space 1: #else - movl %esp, %eax + movl %esp, %eax #endif TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - movb PT_CS(%esp), %bl + movb PT_CS(%esp), %bl andb $SEGMENT_RPL_MASK, %bl cmpb $USER_RPL, %bl - jb resume_kernel - xorl %edx, %edx - call do_notify_resume - jmp resume_userspace + jb resume_kernel + xorl %edx, %edx + call do_notify_resume + jmp resume_userspace #ifdef CONFIG_VM86 ALIGN work_notifysig_v86: - pushl %ecx # save ti_flags for do_notify_resume - call save_v86_state # %eax contains pt_regs pointer - popl %ecx - movl %eax, %esp - jmp 1b + pushl %ecx # save ti_flags for do_notify_resume + call save_v86_state # %eax contains pt_regs pointer + popl %ecx + movl %eax, %esp + jmp 1b #endif END(work_pending) # perform syscall exit tracing ALIGN syscall_trace_entry: - movl $-ENOSYS,PT_EAX(%esp) - movl %esp, %eax - call syscall_trace_enter + movl $-ENOSYS, PT_EAX(%esp) + movl %esp, %eax + call syscall_trace_enter /* What it returned is what we'll actually use. */ - cmpl $(NR_syscalls), %eax - jnae syscall_call - jmp syscall_exit + cmpl $(NR_syscalls), %eax + jnae syscall_call + jmp syscall_exit END(syscall_trace_entry) # perform syscall exit tracing ALIGN syscall_exit_work: - testl $_TIF_WORK_SYSCALL_EXIT, %ecx - jz work_pending + testl $_TIF_WORK_SYSCALL_EXIT, %ecx + jz work_pending TRACE_IRQS_ON - ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call - # schedule() instead - movl %esp, %eax - call syscall_trace_leave - jmp resume_userspace + ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call + # schedule() instead + movl %esp, %eax + call syscall_trace_leave + jmp resume_userspace END(syscall_exit_work) syscall_fault: ASM_CLAC GET_THREAD_INFO(%ebp) - movl $-EFAULT,PT_EAX(%esp) - jmp resume_userspace + movl $-EFAULT, PT_EAX(%esp) + jmp resume_userspace END(syscall_fault) syscall_badsys: - movl $-ENOSYS,%eax - jmp syscall_after_call + movl $-ENOSYS, %eax + jmp syscall_after_call END(syscall_badsys) sysenter_badsys: - movl $-ENOSYS,%eax - jmp sysenter_after_call + movl $-ENOSYS, %eax + jmp sysenter_after_call END(sysenter_badsys) .macro FIXUP_ESPFIX_STACK @@ -613,24 +607,24 @@ END(sysenter_badsys) */ #ifdef CONFIG_X86_ESPFIX32 /* fixup the stack */ - mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ - mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ + mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ + mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ shl $16, %eax - addl %esp, %eax /* the adjusted stack pointer */ - pushl $__KERNEL_DS - pushl %eax - lss (%esp), %esp /* switch to the normal stack segment */ + addl %esp, %eax /* the adjusted stack pointer */ + pushl $__KERNEL_DS + pushl %eax + lss (%esp), %esp /* switch to the normal stack segment */ #endif .endm .macro UNWIND_ESPFIX_STACK #ifdef CONFIG_X86_ESPFIX32 - movl %ss, %eax + movl %ss, %eax /* see if on espfix stack */ - cmpw $__ESPFIX_SS, %ax - jne 27f - movl $__KERNEL_DS, %eax - movl %eax, %ds - movl %eax, %es + cmpw $__ESPFIX_SS, %ax + jne 27f + movl $__KERNEL_DS, %eax + movl %eax, %ds + movl %eax, %es /* switch to normal stack */ FIXUP_ESPFIX_STACK 27: @@ -645,7 +639,7 @@ END(sysenter_badsys) ENTRY(irq_entries_start) vector=FIRST_EXTERNAL_VECTOR .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushl $(~vector+0x80) /* Note: always in signed byte range */ + pushl $(~vector+0x80) /* Note: always in signed byte range */ vector=vector+1 jmp common_interrupt .align 8 @@ -659,35 +653,34 @@ END(irq_entries_start) .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: ASM_CLAC - addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ + addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */ SAVE_ALL TRACE_IRQS_OFF - movl %esp,%eax - call do_IRQ - jmp ret_from_intr + movl %esp, %eax + call do_IRQ + jmp ret_from_intr ENDPROC(common_interrupt) #define BUILD_INTERRUPT3(name, nr, fn) \ ENTRY(name) \ ASM_CLAC; \ - pushl $~(nr); \ + pushl $~(nr); \ SAVE_ALL; \ TRACE_IRQS_OFF \ - movl %esp,%eax; \ - call fn; \ - jmp ret_from_intr; \ + movl %esp, %eax; \ + call fn; \ + jmp ret_from_intr; \ ENDPROC(name) #ifdef CONFIG_TRACING -#define TRACE_BUILD_INTERRUPT(name, nr) \ - BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name) +# define TRACE_BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name) #else -#define TRACE_BUILD_INTERRUPT(name, nr) +# define TRACE_BUILD_INTERRUPT(name, nr) #endif -#define BUILD_INTERRUPT(name, nr) \ - BUILD_INTERRUPT3(name, nr, smp_##name); \ +#define BUILD_INTERRUPT(name, nr) \ + BUILD_INTERRUPT3(name, nr, smp_##name); \ TRACE_BUILD_INTERRUPT(name, nr) /* The include is where all of the SMP etc. interrupts come from */ @@ -695,30 +688,30 @@ ENDPROC(name) ENTRY(coprocessor_error) ASM_CLAC - pushl $0 - pushl $do_coprocessor_error - jmp error_code + pushl $0 + pushl $do_coprocessor_error + jmp error_code END(coprocessor_error) ENTRY(simd_coprocessor_error) ASM_CLAC - pushl $0 + pushl $0 #ifdef CONFIG_X86_INVD_BUG /* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */ - ALTERNATIVE "pushl $do_general_protection", \ - "pushl $do_simd_coprocessor_error", \ + ALTERNATIVE "pushl $do_general_protection", \ + "pushl $do_simd_coprocessor_error", \ X86_FEATURE_XMM #else - pushl $do_simd_coprocessor_error + pushl $do_simd_coprocessor_error #endif - jmp error_code + jmp error_code END(simd_coprocessor_error) ENTRY(device_not_available) ASM_CLAC - pushl $-1 # mark this as an int - pushl $do_device_not_available - jmp error_code + pushl $-1 # mark this as an int + pushl $do_device_not_available + jmp error_code END(device_not_available) #ifdef CONFIG_PARAVIRT @@ -735,165 +728,171 @@ END(native_irq_enable_sysexit) ENTRY(overflow) ASM_CLAC - pushl $0 - pushl $do_overflow - jmp error_code + pushl $0 + pushl $do_overflow + jmp error_code END(overflow) ENTRY(bounds) ASM_CLAC - pushl $0 - pushl $do_bounds - jmp error_code + pushl $0 + pushl $do_bounds + jmp error_code END(bounds) ENTRY(invalid_op) ASM_CLAC - pushl $0 - pushl $do_invalid_op - jmp error_code + pushl $0 + pushl $do_invalid_op + jmp error_code END(invalid_op) ENTRY(coprocessor_segment_overrun) ASM_CLAC - pushl $0 - pushl $do_coprocessor_segment_overrun - jmp error_code + pushl $0 + pushl $do_coprocessor_segment_overrun + jmp error_code END(coprocessor_segment_overrun) ENTRY(invalid_TSS) ASM_CLAC - pushl $do_invalid_TSS - jmp error_code + pushl $do_invalid_TSS + jmp error_code END(invalid_TSS) ENTRY(segment_not_present) ASM_CLAC - pushl $do_segment_not_present - jmp error_code + pushl $do_segment_not_present + jmp error_code END(segment_not_present) ENTRY(stack_segment) ASM_CLAC - pushl $do_stack_segment - jmp error_code + pushl $do_stack_segment + jmp error_code END(stack_segment) ENTRY(alignment_check) ASM_CLAC - pushl $do_alignment_check - jmp error_code + pushl $do_alignment_check + jmp error_code END(alignment_check) ENTRY(divide_error) ASM_CLAC - pushl $0 # no error code - pushl $do_divide_error - jmp error_code + pushl $0 # no error code + pushl $do_divide_error + jmp error_code END(divide_error) #ifdef CONFIG_X86_MCE ENTRY(machine_check) ASM_CLAC - pushl $0 - pushl machine_check_vector - jmp error_code + pushl $0 + pushl machine_check_vector + jmp error_code END(machine_check) #endif ENTRY(spurious_interrupt_bug) ASM_CLAC - pushl $0 - pushl $do_spurious_interrupt_bug - jmp error_code + pushl $0 + pushl $do_spurious_interrupt_bug + jmp error_code END(spurious_interrupt_bug) #ifdef CONFIG_XEN -/* Xen doesn't set %esp to be precisely what the normal sysenter - entrypoint expects, so fix it up before using the normal path. */ +/* + * Xen doesn't set %esp to be precisely what the normal SYSENTER + * entry point expects, so fix it up before using the normal path. + */ ENTRY(xen_sysenter_target) - addl $5*4, %esp /* remove xen-provided frame */ - jmp sysenter_past_esp + addl $5*4, %esp /* remove xen-provided frame */ + jmp sysenter_past_esp ENTRY(xen_hypervisor_callback) - pushl $-1 /* orig_ax = -1 => not a system call */ + pushl $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL TRACE_IRQS_OFF - /* Check to see if we got the event in the critical - region in xen_iret_direct, after we've reenabled - events and checked for pending events. This simulates - iret instruction's behaviour where it delivers a - pending interrupt when enabling interrupts. */ - movl PT_EIP(%esp),%eax - cmpl $xen_iret_start_crit,%eax - jb 1f - cmpl $xen_iret_end_crit,%eax - jae 1f + /* + * Check to see if we got the event in the critical + * region in xen_iret_direct, after we've reenabled + * events and checked for pending events. This simulates + * iret instruction's behaviour where it delivers a + * pending interrupt when enabling interrupts: + */ + movl PT_EIP(%esp), %eax + cmpl $xen_iret_start_crit, %eax + jb 1f + cmpl $xen_iret_end_crit, %eax + jae 1f - jmp xen_iret_crit_fixup + jmp xen_iret_crit_fixup ENTRY(xen_do_upcall) -1: mov %esp, %eax - call xen_evtchn_do_upcall +1: mov %esp, %eax + call xen_evtchn_do_upcall #ifndef CONFIG_PREEMPT - call xen_maybe_preempt_hcall + call xen_maybe_preempt_hcall #endif - jmp ret_from_intr + jmp ret_from_intr ENDPROC(xen_hypervisor_callback) -# Hypervisor uses this for application faults while it executes. -# We get here for two reasons: -# 1. Fault while reloading DS, ES, FS or GS -# 2. Fault while executing IRET -# Category 1 we fix up by reattempting the load, and zeroing the segment -# register if the load fails. -# Category 2 we fix up by jumping to do_iret_error. We cannot use the -# normal Linux return path in this case because if we use the IRET hypercall -# to pop the stack frame we end up in an infinite loop of failsafe callbacks. -# We distinguish between categories by maintaining a status value in EAX. +/* + * Hypervisor uses this for application faults while it executes. + * We get here for two reasons: + * 1. Fault while reloading DS, ES, FS or GS + * 2. Fault while executing IRET + * Category 1 we fix up by reattempting the load, and zeroing the segment + * register if the load fails. + * Category 2 we fix up by jumping to do_iret_error. We cannot use the + * normal Linux return path in this case because if we use the IRET hypercall + * to pop the stack frame we end up in an infinite loop of failsafe callbacks. + * We distinguish between categories by maintaining a status value in EAX. + */ ENTRY(xen_failsafe_callback) - pushl %eax - movl $1,%eax -1: mov 4(%esp),%ds -2: mov 8(%esp),%es -3: mov 12(%esp),%fs -4: mov 16(%esp),%gs + pushl %eax + movl $1, %eax +1: mov 4(%esp), %ds +2: mov 8(%esp), %es +3: mov 12(%esp), %fs +4: mov 16(%esp), %gs /* EAX == 0 => Category 1 (Bad segment) EAX != 0 => Category 2 (Bad IRET) */ - testl %eax,%eax - popl %eax - lea 16(%esp),%esp - jz 5f - jmp iret_exc -5: pushl $-1 /* orig_ax = -1 => not a system call */ + testl %eax, %eax + popl %eax + lea 16(%esp), %esp + jz 5f + jmp iret_exc +5: pushl $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL - jmp ret_from_exception - -.section .fixup,"ax" -6: xorl %eax,%eax - movl %eax,4(%esp) - jmp 1b -7: xorl %eax,%eax - movl %eax,8(%esp) - jmp 2b -8: xorl %eax,%eax - movl %eax,12(%esp) - jmp 3b -9: xorl %eax,%eax - movl %eax,16(%esp) - jmp 4b + jmp ret_from_exception + +.section .fixup, "ax" +6: xorl %eax, %eax + movl %eax, 4(%esp) + jmp 1b +7: xorl %eax, %eax + movl %eax, 8(%esp) + jmp 2b +8: xorl %eax, %eax + movl %eax, 12(%esp) + jmp 3b +9: xorl %eax, %eax + movl %eax, 16(%esp) + jmp 4b .previous - _ASM_EXTABLE(1b,6b) - _ASM_EXTABLE(2b,7b) - _ASM_EXTABLE(3b,8b) - _ASM_EXTABLE(4b,9b) + _ASM_EXTABLE(1b, 6b) + _ASM_EXTABLE(2b, 7b) + _ASM_EXTABLE(3b, 8b) + _ASM_EXTABLE(4b, 9b) ENDPROC(xen_failsafe_callback) BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR, xen_evtchn_do_upcall) -#endif /* CONFIG_XEN */ +#endif /* CONFIG_XEN */ #if IS_ENABLED(CONFIG_HYPERV) @@ -910,28 +909,28 @@ ENTRY(mcount) END(mcount) ENTRY(ftrace_caller) - pushl %eax - pushl %ecx - pushl %edx - pushl $0 /* Pass NULL as regs pointer */ - movl 4*4(%esp), %eax - movl 0x4(%ebp), %edx - movl function_trace_op, %ecx - subl $MCOUNT_INSN_SIZE, %eax + pushl %eax + pushl %ecx + pushl %edx + pushl $0 /* Pass NULL as regs pointer */ + movl 4*4(%esp), %eax + movl 0x4(%ebp), %edx + movl function_trace_op, %ecx + subl $MCOUNT_INSN_SIZE, %eax .globl ftrace_call ftrace_call: - call ftrace_stub + call ftrace_stub - addl $4,%esp /* skip NULL pointer */ - popl %edx - popl %ecx - popl %eax + addl $4, %esp /* skip NULL pointer */ + popl %edx + popl %ecx + popl %eax ftrace_ret: #ifdef CONFIG_FUNCTION_GRAPH_TRACER .globl ftrace_graph_call ftrace_graph_call: - jmp ftrace_stub + jmp ftrace_stub #endif .globl ftrace_stub @@ -949,72 +948,72 @@ ENTRY(ftrace_regs_caller) * as the current return ip is. We move the return ip into the * ip location, and move flags into the return ip location. */ - pushl 4(%esp) /* save return ip into ip slot */ - - pushl $0 /* Load 0 into orig_ax */ - pushl %gs - pushl %fs - pushl %es - pushl %ds - pushl %eax - pushl %ebp - pushl %edi - pushl %esi - pushl %edx - pushl %ecx - pushl %ebx - - movl 13*4(%esp), %eax /* Get the saved flags */ - movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */ - /* clobbering return ip */ - movl $__KERNEL_CS,13*4(%esp) - - movl 12*4(%esp), %eax /* Load ip (1st parameter) */ - subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */ - movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */ - movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */ - pushl %esp /* Save pt_regs as 4th parameter */ + pushl 4(%esp) /* save return ip into ip slot */ + + pushl $0 /* Load 0 into orig_ax */ + pushl %gs + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx + + movl 13*4(%esp), %eax /* Get the saved flags */ + movl %eax, 14*4(%esp) /* Move saved flags into regs->flags location */ + /* clobbering return ip */ + movl $__KERNEL_CS, 13*4(%esp) + + movl 12*4(%esp), %eax /* Load ip (1st parameter) */ + subl $MCOUNT_INSN_SIZE, %eax /* Adjust ip */ + movl 0x4(%ebp), %edx /* Load parent ip (2nd parameter) */ + movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */ + pushl %esp /* Save pt_regs as 4th parameter */ GLOBAL(ftrace_regs_call) - call ftrace_stub - - addl $4, %esp /* Skip pt_regs */ - movl 14*4(%esp), %eax /* Move flags back into cs */ - movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */ - movl 12*4(%esp), %eax /* Get return ip from regs->ip */ - movl %eax, 14*4(%esp) /* Put return ip back for ret */ - - popl %ebx - popl %ecx - popl %edx - popl %esi - popl %edi - popl %ebp - popl %eax - popl %ds - popl %es - popl %fs - popl %gs - addl $8, %esp /* Skip orig_ax and ip */ - popf /* Pop flags at end (no addl to corrupt flags) */ - jmp ftrace_ret + call ftrace_stub + + addl $4, %esp /* Skip pt_regs */ + movl 14*4(%esp), %eax /* Move flags back into cs */ + movl %eax, 13*4(%esp) /* Needed to keep addl from modifying flags */ + movl 12*4(%esp), %eax /* Get return ip from regs->ip */ + movl %eax, 14*4(%esp) /* Put return ip back for ret */ + + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax + popl %ds + popl %es + popl %fs + popl %gs + addl $8, %esp /* Skip orig_ax and ip */ + popf /* Pop flags at end (no addl to corrupt flags) */ + jmp ftrace_ret popf - jmp ftrace_stub + jmp ftrace_stub #else /* ! CONFIG_DYNAMIC_FTRACE */ ENTRY(mcount) - cmpl $__PAGE_OFFSET, %esp - jb ftrace_stub /* Paging not enabled yet? */ + cmpl $__PAGE_OFFSET, %esp + jb ftrace_stub /* Paging not enabled yet? */ - cmpl $ftrace_stub, ftrace_trace_function - jnz trace + cmpl $ftrace_stub, ftrace_trace_function + jnz trace #ifdef CONFIG_FUNCTION_GRAPH_TRACER - cmpl $ftrace_stub, ftrace_graph_return - jnz ftrace_graph_caller + cmpl $ftrace_stub, ftrace_graph_return + jnz ftrace_graph_caller - cmpl $ftrace_graph_entry_stub, ftrace_graph_entry - jnz ftrace_graph_caller + cmpl $ftrace_graph_entry_stub, ftrace_graph_entry + jnz ftrace_graph_caller #endif .globl ftrace_stub ftrace_stub: @@ -1022,92 +1021,92 @@ ftrace_stub: /* taken from glibc */ trace: - pushl %eax - pushl %ecx - pushl %edx - movl 0xc(%esp), %eax - movl 0x4(%ebp), %edx - subl $MCOUNT_INSN_SIZE, %eax - - call *ftrace_trace_function - - popl %edx - popl %ecx - popl %eax - jmp ftrace_stub + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + subl $MCOUNT_INSN_SIZE, %eax + + call *ftrace_trace_function + + popl %edx + popl %ecx + popl %eax + jmp ftrace_stub END(mcount) #endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* CONFIG_FUNCTION_TRACER */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER ENTRY(ftrace_graph_caller) - pushl %eax - pushl %ecx - pushl %edx - movl 0xc(%esp), %eax - lea 0x4(%ebp), %edx - movl (%ebp), %ecx - subl $MCOUNT_INSN_SIZE, %eax - call prepare_ftrace_return - popl %edx - popl %ecx - popl %eax + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + lea 0x4(%ebp), %edx + movl (%ebp), %ecx + subl $MCOUNT_INSN_SIZE, %eax + call prepare_ftrace_return + popl %edx + popl %ecx + popl %eax ret END(ftrace_graph_caller) .globl return_to_handler return_to_handler: - pushl %eax - pushl %edx - movl %ebp, %eax - call ftrace_return_to_handler - movl %eax, %ecx - popl %edx - popl %eax - jmp *%ecx + pushl %eax + pushl %edx + movl %ebp, %eax + call ftrace_return_to_handler + movl %eax, %ecx + popl %edx + popl %eax + jmp *%ecx #endif #ifdef CONFIG_TRACING ENTRY(trace_page_fault) ASM_CLAC - pushl $trace_do_page_fault - jmp error_code + pushl $trace_do_page_fault + jmp error_code END(trace_page_fault) #endif ENTRY(page_fault) ASM_CLAC - pushl $do_page_fault + pushl $do_page_fault ALIGN error_code: /* the function address is in %gs's slot on the stack */ - pushl %fs - pushl %es - pushl %ds - pushl %eax - pushl %ebp - pushl %edi - pushl %esi - pushl %edx - pushl %ecx - pushl %ebx + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx cld - movl $(__KERNEL_PERCPU), %ecx - movl %ecx, %fs + movl $(__KERNEL_PERCPU), %ecx + movl %ecx, %fs UNWIND_ESPFIX_STACK GS_TO_REG %ecx - movl PT_GS(%esp), %edi # get the function address - movl PT_ORIG_EAX(%esp), %edx # get the error code - movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + movl PT_GS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart REG_TO_PTGS %ecx SET_KERNEL_GS %ecx - movl $(__USER_DS), %ecx - movl %ecx, %ds - movl %ecx, %es + movl $(__USER_DS), %ecx + movl %ecx, %ds + movl %ecx, %es TRACE_IRQS_OFF - movl %esp,%eax # pt_regs pointer - call *%edi - jmp ret_from_exception + movl %esp, %eax # pt_regs pointer + call *%edi + jmp ret_from_exception END(page_fault) /* @@ -1124,28 +1123,28 @@ END(page_fault) * the instruction that would have done it for sysenter. */ .macro FIX_STACK offset ok label - cmpw $__KERNEL_CS, 4(%esp) - jne \ok + cmpw $__KERNEL_CS, 4(%esp) + jne \ok \label: - movl TSS_sysenter_sp0 + \offset(%esp), %esp + movl TSS_sysenter_sp0 + \offset(%esp), %esp pushfl - pushl $__KERNEL_CS - pushl $sysenter_past_esp + pushl $__KERNEL_CS + pushl $sysenter_past_esp .endm ENTRY(debug) ASM_CLAC - cmpl $entry_SYSENTER_32,(%esp) - jne debug_stack_correct + cmpl $entry_SYSENTER_32, (%esp) + jne debug_stack_correct FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn debug_stack_correct: - pushl $-1 # mark this as an int + pushl $-1 # mark this as an int SAVE_ALL TRACE_IRQS_OFF - xorl %edx,%edx # error code 0 - movl %esp,%eax # pt_regs pointer - call do_debug - jmp ret_from_exception + xorl %edx, %edx # error code 0 + movl %esp, %eax # pt_regs pointer + call do_debug + jmp ret_from_exception END(debug) /* @@ -1159,91 +1158,91 @@ END(debug) ENTRY(nmi) ASM_CLAC #ifdef CONFIG_X86_ESPFIX32 - pushl %eax - movl %ss, %eax - cmpw $__ESPFIX_SS, %ax - popl %eax - je nmi_espfix_stack + pushl %eax + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + je nmi_espfix_stack #endif - cmpl $entry_SYSENTER_32,(%esp) - je nmi_stack_fixup - pushl %eax - movl %esp,%eax - /* Do not access memory above the end of our stack page, + cmpl $entry_SYSENTER_32, (%esp) + je nmi_stack_fixup + pushl %eax + movl %esp, %eax + /* + * Do not access memory above the end of our stack page, * it might not exist. */ - andl $(THREAD_SIZE-1),%eax - cmpl $(THREAD_SIZE-20),%eax - popl %eax - jae nmi_stack_correct - cmpl $entry_SYSENTER_32,12(%esp) - je nmi_debug_stack_check + andl $(THREAD_SIZE-1), %eax + cmpl $(THREAD_SIZE-20), %eax + popl %eax + jae nmi_stack_correct + cmpl $entry_SYSENTER_32, 12(%esp) + je nmi_debug_stack_check nmi_stack_correct: - pushl %eax + pushl %eax SAVE_ALL - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_nmi - jmp restore_all_notrace + xorl %edx, %edx # zero error code + movl %esp, %eax # pt_regs pointer + call do_nmi + jmp restore_all_notrace nmi_stack_fixup: FIX_STACK 12, nmi_stack_correct, 1 - jmp nmi_stack_correct + jmp nmi_stack_correct nmi_debug_stack_check: - cmpw $__KERNEL_CS,16(%esp) - jne nmi_stack_correct - cmpl $debug,(%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn,(%esp) - ja nmi_stack_correct + cmpw $__KERNEL_CS, 16(%esp) + jne nmi_stack_correct + cmpl $debug, (%esp) + jb nmi_stack_correct + cmpl $debug_esp_fix_insn, (%esp) + ja nmi_stack_correct FIX_STACK 24, nmi_stack_correct, 1 - jmp nmi_stack_correct + jmp nmi_stack_correct #ifdef CONFIG_X86_ESPFIX32 nmi_espfix_stack: /* * create the pointer to lss back */ - pushl %ss - pushl %esp - addl $4, (%esp) + pushl %ss + pushl %esp + addl $4, (%esp) /* copy the iret frame of 12 bytes */ .rept 3 - pushl 16(%esp) + pushl 16(%esp) .endr - pushl %eax + pushl %eax SAVE_ALL - FIXUP_ESPFIX_STACK # %eax == %esp - xorl %edx,%edx # zero error code - call do_nmi + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx, %edx # zero error code + call do_nmi RESTORE_REGS - lss 12+4(%esp), %esp # back to espfix stack - jmp irq_return + lss 12+4(%esp), %esp # back to espfix stack + jmp irq_return #endif END(nmi) ENTRY(int3) ASM_CLAC - pushl $-1 # mark this as an int + pushl $-1 # mark this as an int SAVE_ALL TRACE_IRQS_OFF - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_int3 - jmp ret_from_exception + xorl %edx, %edx # zero error code + movl %esp, %eax # pt_regs pointer + call do_int3 + jmp ret_from_exception END(int3) ENTRY(general_protection) - pushl $do_general_protection - jmp error_code + pushl $do_general_protection + jmp error_code END(general_protection) #ifdef CONFIG_KVM_GUEST ENTRY(async_page_fault) ASM_CLAC - pushl $do_async_page_fault - jmp error_code + pushl $do_async_page_fault + jmp error_code END(async_page_fault) #endif - -- 2.20.1