From a47aaa69de88913d1640c4bd28c67fad142c61a3 Mon Sep 17 00:00:00 2001 From: Raja Mani Date: Fri, 18 Mar 2016 11:44:21 +0200 Subject: [PATCH] dt: bindings: add new dt entry for pre calibration in qcom, ath10k.txt There two things done in this patch, 1) Existing device tree entry 'qcom,ath10k-calibration-data' carries not only calibration data, it carries board specific data too. So, make appropriate update in doc. 2) ipq4019 wifi needs new devie tree entry to carry calibration data alone (called pre cal data, it doesn't include any other info). Using 'qcom,ath10k-calibration-data' for ipq4019 would alter the purpose of it. Hence, add new device tree entry called 'qcom,ath10k-pre-calibration-data' to carry only pre calibration data. Signed-off-by: Raja Mani Acked-by: Rob Herring Signed-off-by: Kalle Valo --- .../bindings/net/wireless/qcom,ath10k.txt | 23 +++++++++++++------ 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 96aae6b4f736..74d7f0af209c 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -5,12 +5,18 @@ Required properties: * "qcom,ath10k" * "qcom,ipq4019-wifi" -PCI based devices uses compatible string "qcom,ath10k" and takes only -calibration data via "qcom,ath10k-calibration-data". Rest of the properties -are not applicable for PCI based devices. +PCI based devices uses compatible string "qcom,ath10k" and takes calibration +data along with board specific data via "qcom,ath10k-calibration-data". +Rest of the properties are not applicable for PCI based devices. AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc. +and also uses most of the properties defined in this doc (except +"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" +to carry pre calibration data. + +In general, entry "qcom,ath10k-pre-calibration-data" and +"qcom,ath10k-calibration-data" conflict with each other and only one +can be provided per device. Optional properties: - reg: Address and length of the register set for the device. @@ -35,8 +41,11 @@ Optional properties: - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. -- qcom,ath10k-calibration-data : calibration data as an array, the - length can vary between hw versions +- qcom,ath10k-calibration-data : calibration data + board specific data + as an array, the length can vary between + hw versions. +- qcom,ath10k-pre-calibration-data : pre calibration data as an array, + the length can vary between hw versions. Example (to supply the calibration data alone): @@ -105,5 +114,5 @@ wifi0: wifi@a000000 { "legacy"; qcom,msi_addr = <0x0b006040>; qcom,msi_base = <0x40>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; + qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; }; -- 2.20.1