From a424f0de61638cbb5047e0a888c54da9cf471f90 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 24 Apr 2017 14:27:21 -0700 Subject: [PATCH] net: dsa: b53: Include IMP/CPU port in dumb forwarding mode Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need to make sure that the IMP/CPU port is included in the forwarding decision. Without this change, switching between non-management ports would work, but not between management ports and non-management ports thus breaking the default state in which DSA switch are brought up. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Reported-by: Eric Anholt Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_common.c | 10 ++++++++++ drivers/net/dsa/b53/b53_regs.h | 4 ++++ 2 files changed, 14 insertions(+) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 8cf4801994e8..ca7f3b005a29 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -326,6 +326,7 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, static void b53_set_forwarding(struct b53_device *dev, int enable) { + struct dsa_switch *ds = dev->ds; u8 mgmt; b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); @@ -336,6 +337,15 @@ static void b53_set_forwarding(struct b53_device *dev, int enable) mgmt &= ~SM_SW_FWD_EN; b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + + /* Include IMP port in dumb forwarding mode when no tagging protocol is + * set + */ + if (ds->ops->get_tag_protocol(ds) == DSA_TAG_PROTO_NONE) { + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); + mgmt |= B53_MII_DUMB_FWDG_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); + } } static void b53_enable_vlan(struct b53_device *dev, bool enable) diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index 9fd24c418fa4..f2a060e7a637 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -104,6 +104,10 @@ #define B53_UC_FWD_EN BIT(6) #define B53_MC_FWD_EN BIT(7) +/* Switch control (8 bit) */ +#define B53_SWITCH_CTRL 0x22 +#define B53_MII_DUMB_FWDG_EN BIT(6) + /* (16 bit) */ #define B53_UC_FLOOD_MASK 0x32 #define B53_MC_FLOOD_MASK 0x34 -- 2.20.1