From a3cc465d95c32bfb529f69dee7841ecd67525561 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 24 Jul 2014 16:37:43 +0800 Subject: [PATCH] r8152: fix the checking of the usb speed When the usb speed of the RTL8152 is not high speed, the USB_DEV_STAT[2:1] should be equal to [0 1]. That is, the STAT_SPEED_FULL should be equal to 2. There is a easy way to check the usb speed by the speed field of the struct usb_device. Use it to replace the original metheod. Signed-off-by: Hayes Wang Spotted-by: Andrey Utkin Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 7bad2d316637..3eab74c7c554 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -282,7 +282,7 @@ /* USB_DEV_STAT */ #define STAT_SPEED_MASK 0x0006 #define STAT_SPEED_HIGH 0x0000 -#define STAT_SPEED_FULL 0x0001 +#define STAT_SPEED_FULL 0x0002 /* USB_TX_AGG */ #define TX_AGG_MAX_THRESHOLD 0x03 @@ -2292,9 +2292,8 @@ static void r8152b_exit_oob(struct r8152 *tp) /* rx share fifo credit full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); - ocp_data &= STAT_SPEED_MASK; - if (ocp_data == STAT_SPEED_FULL) { + if (tp->udev->speed == USB_SPEED_FULL || + tp->udev->speed == USB_SPEED_LOW) { /* rx share fifo credit near full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_FULL); -- 2.20.1