From a373ebcb5a4cc0c7a99141bcf7942653facca330 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Wed, 26 Mar 2014 21:00:06 +0100 Subject: [PATCH] rtl8180: add ISR for rtl8187se rtl8187se has more queues and different ISR flags. This patch adds a separated ISR handler for rtl8187se Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8180/dev.c | 57 +++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 867ec07da414..242a4bc46b88 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -264,6 +264,55 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) } } +static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u32 reg; + unsigned long flags; + static int desc_err; + + spin_lock_irqsave(&priv->lock, flags); + /* Note: 32-bit interrupt status */ + reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE); + if (unlikely(reg == 0xFFFFFFFF)) { + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; + } + + rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg); + + if (reg & IMR_TIMEOUT1) + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (reg & (IMR_TBDOK | IMR_TBDER)) + rtl8180_handle_tx(dev, 4); + + if (reg & (IMR_TVODOK | IMR_TVODER)) + rtl8180_handle_tx(dev, 0); + + if (reg & (IMR_TVIDOK | IMR_TVIDER)) + rtl8180_handle_tx(dev, 1); + + if (reg & (IMR_TBEDOK | IMR_TBEDER)) + rtl8180_handle_tx(dev, 2); + + if (reg & (IMR_TBKDOK | IMR_TBKDER)) + rtl8180_handle_tx(dev, 3); + + if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK)) + rtl8180_handle_rx(dev); + /* The interface sometimes generates several RX DMA descriptor errors + * at startup. Do not report these. + */ + if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2) + if (net_ratelimit()) + wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n"); + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; +} + static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) { struct ieee80211_hw *dev = dev_id; @@ -685,8 +734,14 @@ static int rtl8180_start(struct ieee80211_hw *dev) if (ret) goto err_free_rings; - ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + ret = request_irq(priv->pdev->irq, rtl8187se_interrupt, IRQF_SHARED, KBUILD_MODNAME, dev); + } else { + ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } + if (ret) { wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); goto err_free_rings; -- 2.20.1