From a2894e3f8ed691b4873c8122e66902fbf0e78e0b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Feb 2011 10:15:19 -0200 Subject: [PATCH] [media] tuner-core: Improve function documentation This driver is complex, and used by everyone. Better to have it properly documented. No functional changes are done in this patch. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 139 ++++++++++++++++++++++++++----- 1 file changed, 116 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 5e1437c358f8..2c7fe18cedeb 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1,7 +1,17 @@ /* - * * i2c tv tuner chip device driver * core core, i.e. kernel interfaces, registering and so on + * + * Copyright(c) by Ralph Metzler, Gerd Knorr, Gunther Mayer + * + * Copyright(c) 2005-2011 by Mauro Carvalho Chehab + * - Added support for a separate Radio tuner + * - Major rework and cleanups at the code + * + * This driver supports many devices and the idea is to let the driver + * detect which device is present. So rather than listing all supported + * devices here, we pretend to support a single, fake device type that will + * handle both radio and analog TV tuning. */ #include @@ -67,6 +77,7 @@ module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); */ static LIST_HEAD(tuner_list); +static const struct v4l2_subdev_ops tuner_ops; /* * Debug macros @@ -124,6 +135,13 @@ struct tuner { const char *name; }; +/* + * Function prototypes + */ + +static void set_tv_freq(struct i2c_client *c, unsigned int freq); +static void set_radio_freq(struct i2c_client *c, unsigned int freq); + /* * tuner attach/detach logic */ @@ -233,13 +251,24 @@ static struct analog_demod_ops tuner_analog_ops = { }; /* - * Functions that are common to both TV and radio + * Functions to select between radio and TV and tuner probe functions */ -static void set_tv_freq(struct i2c_client *c, unsigned int freq); -static void set_radio_freq(struct i2c_client *c, unsigned int freq); -static const struct v4l2_subdev_ops tuner_ops; - +/** + * set_type - Sets the tuner type for a given device + * + * @c: i2c_client descriptoy + * @type: type of the tuner (e. g. tuner number) + * @new_mode_mask: Indicates if tuner supports TV and/or Radio + * @new_config: an optional parameter ranging from 0-255 used by + a few tuners to adjust an internal parameter, + like LNA mode + * @tuner_callback: an optional function to be called when switching + * to analog mode + * + * This function applys the tuner config to tuner specified + * by tun_setup structure. It contains several per-tuner initialization "magic" + */ static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, int (*tuner_callback) (void *dev, int component, int cmd, int arg)) @@ -452,6 +481,15 @@ static int tuner_s_type_addr(struct v4l2_subdev *sd, return 0; } +/** + * tuner_s_config - Sets tuner configuration + * + * @sd: subdev descriptor + * @cfg: tuner configuration + * + * Calls tuner set_config() private function to set some tuner-internal + * parameters + */ static int tuner_s_config(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *cfg) { @@ -470,10 +508,20 @@ static int tuner_s_config(struct v4l2_subdev *sd, return 0; } -/* Search for existing radio and/or TV tuners on the given I2C adapter. - Note that when this function is called from tuner_probe you can be - certain no other devices will be added/deleted at the same time, I2C - core protects against that. */ +/** + * tuner_lookup - Seek for tuner adapters + * + * @adap: i2c_adapter struct + * @radio: pointer to be filled if the adapter is radio + * @tv: pointer to be filled if the adapter is TV + * + * Search for existing radio and/or TV tuners on the given I2C adapter, + * discarding demod-only adapters (tda9887). + * + * Note that when this function is called from tuner_probe you can be + * certain no other devices will be added/deleted at the same time, I2C + * core protects against that. + */ static void tuner_lookup(struct i2c_adapter *adap, struct tuner **radio, struct tuner **tv) { @@ -502,8 +550,20 @@ static void tuner_lookup(struct i2c_adapter *adap, } } -/* During client attach, set_type is called by adapter's attach_inform callback. - set_type must then be completed by tuner_probe. +/** + *tuner_probe - Probes the existing tuners on an I2C bus + * + * @client: i2c_client descriptor + * @id: not used + * + * This routine probes for tuners at the expected I2C addresses. On most + * cases, if a device answers to a given I2C address, it assumes that the + * device is a tuner. On a few cases, however, an additional logic is needed + * to double check if the device is really a tuner, or to identify the tuner + * type, like on tea5767/5761 devices. + * + * During client attach, set_type is called by adapter's attach_inform callback. + * set_type must then be completed by tuner_probe. */ static int tuner_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -618,6 +678,12 @@ register_client: return 0; } +/** + * tuner_remove - detaches a tuner + * + * @client: i2c_client descriptor + */ + static int tuner_remove(struct i2c_client *client) { struct tuner *t = to_tuner(i2c_get_clientdata(client)); @@ -635,7 +701,12 @@ static int tuner_remove(struct i2c_client *client) * Functions that are specific for TV mode */ -/* Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz */ +/** + * set_tv_freq - Set tuner frequency, freq in Units of 62.5 kHz = 1/16MHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ static void set_tv_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = to_tuner(i2c_get_clientdata(c)); @@ -675,7 +746,19 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) analog_ops->set_params(&t->fe, ¶ms); } -/* get more precise norm info from insmod option */ +/** + * tuner_fixup_std - force a given video standard variant + * + * @t: tuner internal struct + * + * A few devices or drivers have problem to detect some standard variations. + * On other operational systems, the drivers generally have a per-country + * code, and some logic to apply per-country hacks. V4L2 API doesn't provide + * such hacks. Instead, it relies on a proper video standard selection from + * the userspace application. However, as some apps are buggy, not allowing + * to distinguish all video standard variations, a modprobe parameter can + * be used to force a video standard match. + */ static int tuner_fixup_std(struct tuner *t) { if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { @@ -797,6 +880,12 @@ static int tuner_fixup_std(struct tuner *t) * Functions that are specific for Radio mode */ +/** + * set_radio_freq - Set tuner frequency, freq in Units of 62.5 Hz = 1/16kHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ static void set_radio_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = to_tuner(i2c_get_clientdata(c)); @@ -972,7 +1061,9 @@ static int tuner_s_power(struct v4l2_subdev *sd, int on) return 0; } -/* ---------------------------------------------------------------------- */ +/* + * Function to splicitly change mode to radio. Probably not needed anymore + */ static int tuner_s_radio(struct v4l2_subdev *sd) { @@ -984,9 +1075,10 @@ static int tuner_s_radio(struct v4l2_subdev *sd) return 0; } -/* --- v4l ioctls --- */ -/* take care: bttv does userspace copying, we'll get a - kernel pointer here... */ +/* + * Tuner callbacks to handle userspace ioctl's + */ + static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tuner *t = to_tuner(sd); @@ -1137,7 +1229,9 @@ static int tuner_command(struct i2c_client *client, unsigned cmd, void *arg) return -ENOIOCTLCMD; } -/* ----------------------------------------------------------------------- */ +/* + * Callback structs + */ static const struct v4l2_subdev_core_ops tuner_core_ops = { .log_status = tuner_log_status, @@ -1160,11 +1254,10 @@ static const struct v4l2_subdev_ops tuner_ops = { .tuner = &tuner_tuner_ops, }; -/* ----------------------------------------------------------------------- */ +/* + * I2C structs and module init functions + */ -/* This driver supports many devices and the idea is to let the driver - detect which device is present. So rather than listing all supported - devices here, we pretend to support a single, fake device type. */ static const struct i2c_device_id tuner_id[] = { { "tuner", }, /* autodetect */ { } -- 2.20.1