From a1def45365594dd16be0d8cc52b0d5a6a79d6ae6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 6 Apr 2016 17:32:38 +0300 Subject: [PATCH] ARM: dts: am57xx-beagle-x15: remove extcon_usb1 USB1 controller is hardwired to be used as Host only port so we don't need to check ID pin state and can get rid of extcon_usb1. This also reduces USB1 controller's and so eSATA power's dependency with EXTCON. This fixes eSATA port with multi_v7_defconfig. Cc: Franklin S Cooper Jr. Cc: Vagrant Cascadian Signed-off-by: Roger Quadros Tested-by: Franklin S Cooper Jr. [tony@atomide.com: updated to describe what it fixes] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 0a5fc5d02ce2..4168eb9dd369 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -99,13 +99,6 @@ #cooling-cells = <2>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb1_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -349,12 +342,6 @@ >; }; - extcon_usb1_pins: extcon_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -706,10 +693,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; -- 2.20.1