From a1b1e1d5bdfe79e3d3b28387dd43bb16531be5a4 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 21 Mar 2017 11:04:02 +0100 Subject: [PATCH] mtd: nand: fsmc: finally remove fsmc_nand_platform_data Since the driver now only supports DT probing, it doesn't make a lot of sense to have a private data structure called platform_data, fill it in with information coming from the DT, and then copying this into the driver-specific structure fsmc_nand_data. So instead, we remove fsmc_nand_platform_data entirely, and have fsmc_nand_probe_config_dt() fill in the fsmc_nand_data structure directly. This requires calling fsmc_nand_probe_config_dt() after fsmc_nand_data has been allocated instead of before. Also, as an added bonus, we now propagate properly the return value of fsmc_nand_probe_config_dt() instead of returning -ENODEV on failure. The error message is also removed, since it no longer made any sense. Signed-off-by: Thomas Petazzoni Reviewed-by: Linus Walleij Signed-off-by: Boris Brezillon --- drivers/mtd/nand/fsmc_nand.c | 73 +++++++++++------------------------- 1 file changed, 21 insertions(+), 52 deletions(-) diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 63055d7dcfef..4c6e239dcee8 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -132,26 +132,6 @@ enum access_mode { USE_WORD_ACCESS, }; -/** - * fsmc_nand_platform_data - platform specific NAND controller config - * @nand_timings: timing setup for the physical NAND interface - * @partitions: partition table for the platform, use a default fallback - * if this is NULL - * @nr_partitions: the number of partitions in the previous entry - * @options: different options for the driver - * @width: bus width - * @bank: default bank - * platform-specific. If the controller only supports one bank - * this may be set to NULL - */ -struct fsmc_nand_platform_data { - struct fsmc_nand_timings *nand_timings; - unsigned int options; - unsigned int bank; - - enum access_mode mode; -}; - /** * struct fsmc_nand_data - structure for FSMC NAND device state * @@ -798,17 +778,18 @@ static bool filter(struct dma_chan *chan, void *slave) } static int fsmc_nand_probe_config_dt(struct platform_device *pdev, - struct device_node *np) + struct fsmc_nand_data *host, + struct nand_chip *nand) { - struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; u32 val; int ret; - pdata->options = 0; + nand->options = 0; if (!of_property_read_u32(np, "bank-width", &val)) { if (val == 2) { - pdata->options |= NAND_BUSWIDTH_16; + nand->options |= NAND_BUSWIDTH_16; } else if (val != 1) { dev_err(&pdev->dev, "invalid bank-width %u\n", val); return -EINVAL; @@ -816,27 +797,27 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, } if (of_get_property(np, "nand-skip-bbtscan", NULL)) - pdata->options |= NAND_SKIP_BBTSCAN; + nand->options |= NAND_SKIP_BBTSCAN; - pdata->nand_timings = devm_kzalloc(&pdev->dev, - sizeof(*pdata->nand_timings), GFP_KERNEL); - if (!pdata->nand_timings) + host->dev_timings = devm_kzalloc(&pdev->dev, + sizeof(*host->dev_timings), GFP_KERNEL); + if (!host->dev_timings) return -ENOMEM; - ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings, - sizeof(*pdata->nand_timings)); + ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings, + sizeof(*host->dev_timings)); if (ret) { dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n"); - pdata->nand_timings = NULL; + host->dev_timings = NULL; } /* Set default NAND bank to 0 */ - pdata->bank = 0; + host->bank = 0; if (!of_property_read_u32(np, "bank", &val)) { if (val > 3) { dev_err(&pdev->dev, "invalid bank %u\n", val); return -EINVAL; } - pdata->bank = val; + host->bank = val; } return 0; } @@ -847,8 +828,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, */ static int __init fsmc_nand_probe(struct platform_device *pdev) { - struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct device_node __maybe_unused *np = pdev->dev.of_node; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; @@ -858,22 +837,17 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) u32 pid; int i; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - pdev->dev.platform_data = pdata; - ret = fsmc_nand_probe_config_dt(pdev, np); - if (ret) { - dev_err(&pdev->dev, "no platform data\n"); - return -ENODEV; - } - /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; + nand = &host->nand; + + ret = fsmc_nand_probe_config_dt(pdev, host, nand); + if (ret) + return ret; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); host->data_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->data_va)) @@ -918,19 +892,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid), AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid)); - host->bank = pdata->bank; host->dev = &pdev->dev; - host->dev_timings = pdata->nand_timings; - host->mode = pdata->mode; if (host->mode == USE_DMA_ACCESS) init_completion(&host->dma_access_complete); /* Link all private pointers */ mtd = nand_to_mtd(&host->nand); - nand = &host->nand; nand_set_controller_data(nand, host); - nand_set_flash_node(nand, np); + nand_set_flash_node(nand, pdev->dev.of_node); mtd->dev.parent = &pdev->dev; nand->IO_ADDR_R = host->data_va; @@ -945,7 +915,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.mode = NAND_ECC_HW; nand->ecc.hwctl = fsmc_enable_hwecc; nand->ecc.size = 512; - nand->options = pdata->options; nand->badblockbits = 7; switch (host->mode) { -- 2.20.1