From a0db28b898266265c1cc2ff84f041a561a265504 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 7 Feb 2010 06:23:53 +0000 Subject: [PATCH] sky2: resume clocks Change the resume path to use pci write config for a couple of reasons: 1. pci_write_config_dword() allows for more error checking of PCI health after resume. 2. better to toggle this register on all chip types, since that is what vendor driver does. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 744362272e2d..1593ed49e8fe 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4859,10 +4859,11 @@ static int sky2_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D0, 0); /* Re-enable all clocks */ - if (hw->chip_id == CHIP_ID_YUKON_EX || - hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_FE_P) - sky2_pci_write32(hw, PCI_DEV_REG3, 0); + err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0); + if (err) { + dev_err(&pdev->dev, "PCI write config failed\n"); + goto out; + } sky2_reset(hw); sky2_write32(hw, B0_IMSK, Y2_IS_BASE); -- 2.20.1