From a052b52f4b6b77503af2647dc0c7415939d8232a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 17 Oct 2006 10:24:23 -0700 Subject: [PATCH] sky2: accept multicast pause frames When using flow control, the PHY needs to accept multicast pause frames. Without this fix, these frames were getting discarded by the PHY before doing any flow control. Signed-off-by: Stephen Hemminger --- drivers/net/sky2.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c1933835178..67ecd66f26d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2850,6 +2850,14 @@ static int sky2_set_mac_address(struct net_device *dev, void *p) return 0; } +static void inline sky2_add_filter(u8 filter[8], const u8 *addr) +{ + u32 bit; + + bit = ether_crc(ETH_ALEN, addr) & 63; + filter[bit >> 3] |= 1 << (bit & 7); +} + static void sky2_set_multicast(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); @@ -2858,7 +2866,10 @@ static void sky2_set_multicast(struct net_device *dev) struct dev_mc_list *list = dev->mc_list; u16 reg; u8 filter[8]; + int rx_pause; + static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 }; + rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH); memset(filter, 0, sizeof(filter)); reg = gma_read16(hw, port, GM_RX_CTRL); @@ -2866,18 +2877,19 @@ static void sky2_set_multicast(struct net_device *dev) if (dev->flags & IFF_PROMISC) /* promiscuous */ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); - else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */ + else if (dev->flags & IFF_ALLMULTI) memset(filter, 0xff, sizeof(filter)); - else if (dev->mc_count == 0) /* no multicast */ + else if (dev->mc_count == 0 && !rx_pause) reg &= ~GM_RXCR_MCF_ENA; else { int i; reg |= GM_RXCR_MCF_ENA; - for (i = 0; list && i < dev->mc_count; i++, list = list->next) { - u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; - filter[bit / 8] |= 1 << (bit % 8); - } + if (rx_pause) + sky2_add_filter(filter, pause_mc_addr); + + for (i = 0; list && i < dev->mc_count; i++, list = list->next) + sky2_add_filter(filter, list->dmi_addr); } gma_write16(hw, port, GM_MC_ADDR_H1, -- 2.20.1