From a027087a6b4c7d985b872cac3e19ce023670792e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 16 Apr 2009 19:56:38 -0500 Subject: [PATCH] rtl8187: Implement TX/RX blink for LED The following patch implements some control over the LED on RTL8187B and RTL8187L devices. Triggers are registered for TX and RX. Whenever the trigger event occurs, the LED is turned off for 1/20 second, then turned back on. Note: For those RTL8187X devices that are built into the computer and have a LED that is expected to be controlled with a radio switch, this patch will not operate that LED. That will take a separate patch to be prepared later. Signed-off-by: Larry Finger Signed-off-by: Herton Ronaldo Krzesinski Tested-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 7 + drivers/net/wireless/rtl818x/Makefile | 2 +- drivers/net/wireless/rtl818x/rtl8187.h | 7 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 18 +- drivers/net/wireless/rtl818x/rtl8187_leds.c | 218 ++++++++++++++++++++ drivers/net/wireless/rtl818x/rtl8187_leds.h | 57 +++++ 6 files changed, 305 insertions(+), 4 deletions(-) create mode 100644 drivers/net/wireless/rtl818x/rtl8187_leds.c create mode 100644 drivers/net/wireless/rtl818x/rtl8187_leds.h diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ad99470ae92d..11c248180982 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -433,6 +433,13 @@ config RTL8187 Thanks to Realtek for their support! +# If possible, automatically enable LEDs for RTL8187. + +config RTL8187_LEDS + bool + depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187) + default y + config ADM8211 tristate "ADMtek ADM8211 support" depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile index c113b3e69046..37e3d4db0c40 100644 --- a/drivers/net/wireless/rtl818x/Makefile +++ b/drivers/net/wireless/rtl818x/Makefile @@ -1,5 +1,5 @@ rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o -rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o +rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o obj-$(CONFIG_RTL8180) += rtl8180.o obj-$(CONFIG_RTL8187) += rtl8187.o diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 9718f61809cf..622196dc078e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -16,6 +16,7 @@ #define RTL8187_H #include "rtl818x.h" +#include "rtl8187_leds.h" #define RTL8187_EEPROM_TXPWR_BASE 0x05 #define RTL8187_EEPROM_MAC_ADDR 0x07 @@ -102,6 +103,12 @@ struct rtl8187_priv { struct usb_anchor anchored; struct delayed_work work; struct ieee80211_hw *dev; +#ifdef CONFIG_RTL8187_LEDS + struct rtl8187_led led_tx; + struct rtl8187_led led_rx; + struct delayed_work led_on; + struct delayed_work led_off; +#endif u16 txpwr_base; u8 asic_rev; u8 is_rtl8187b; diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index d6d4001812a7..ac558da92aac 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -29,6 +29,9 @@ #include "rtl8187.h" #include "rtl8187_rtl8225.h" +#ifdef CONFIG_RTL8187_LEDS +#include "rtl8187_leds.h" +#endif MODULE_AUTHOR("Michael Wu "); MODULE_AUTHOR("Andrea Merello "); @@ -734,10 +737,10 @@ static const u8 rtl8187b_reg_table[][3] = { {0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0}, - {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x91, 0x03, 0}, + {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2}, - {0x4C, 0x00, 2}, {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, - {0x8E, 0x08, 0}, {0x8F, 0x00, 0} + {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0}, + {0x8F, 0x00, 0} }; static int rtl8187b_init_hw(struct ieee80211_hw *dev) @@ -1501,6 +1504,12 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, wiphy_name(dev->wiphy), dev->wiphy->perm_addr, chip_name, priv->asic_rev, priv->rf->name); +#ifdef CONFIG_RTL8187_LEDS + eeprom_93cx6_read(&eeprom, 0x3F, ®); + reg &= 0xFF; + rtl8187_leds_init(dev, reg); +#endif + return 0; err_free_dev: @@ -1518,6 +1527,9 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) if (!dev) return; +#ifdef CONFIG_RTL8187_LEDS + rtl8187_leds_exit(dev); +#endif ieee80211_unregister_hw(dev); priv = dev->priv; diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c new file mode 100644 index 000000000000..b44253592243 --- /dev/null +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -0,0 +1,218 @@ +/* + * Linux LED driver for RTL8187 + * + * Copyright 2009 Larry Finger + * + * Based on the LED handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Thanks to Realtek for their support! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifdef CONFIG_RTL8187_LEDS + +#include +#include +#include + +#include "rtl8187.h" +#include "rtl8187_leds.h" + +static void led_turn_on(struct work_struct *work) +{ + /* As this routine does read/write operations on the hardware, it must + * be run from a work queue. + */ + u8 reg; + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + led_on.work); + struct rtl8187_led *led = &priv->led_tx; + + /* Don't change the LED, when the device is down. */ + if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) + return ; + + /* Skip if the LED is not registered. */ + if (!led->dev) + return; + mutex_lock(&priv->conf_mutex); + switch (led->ledpin) { + case LED_PIN_GPIO0: + rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00); + break; + case LED_PIN_LED0: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_LED1: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_HW: + default: + break; + } + mutex_unlock(&priv->conf_mutex); +} + +static void led_turn_off(struct work_struct *work) +{ + /* As this routine does read/write operations on the hardware, it must + * be run from a work queue. + */ + u8 reg; + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + led_off.work); + struct rtl8187_led *led = &priv->led_tx; + + /* Don't change the LED, when the device is down. */ + if (priv->mode == NL80211_IFTYPE_UNSPECIFIED) + return ; + + /* Skip if the LED is not registered. */ + if (!led->dev) + return; + mutex_lock(&priv->conf_mutex); + switch (led->ledpin) { + case LED_PIN_GPIO0: + rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01); + break; + case LED_PIN_LED0: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_LED1: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_HW: + default: + break; + } + mutex_unlock(&priv->conf_mutex); +} + +/* Callback from the LED subsystem. */ +static void rtl8187_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led, + led_dev); + struct ieee80211_hw *hw = led->dev; + struct rtl8187_priv *priv = hw->priv; + + if (brightness == LED_OFF) { + queue_delayed_work(hw->workqueue, &priv->led_off, 0); + /* The LED is off for 1/20 sec so that it just blinks. */ + queue_delayed_work(hw->workqueue, &priv->led_on, HZ / 20); + } else + queue_delayed_work(hw->workqueue, &priv->led_on, 0); +} + +static int rtl8187_register_led(struct ieee80211_hw *dev, + struct rtl8187_led *led, const char *name, + const char *default_trigger, u8 ledpin) +{ + int err; + struct rtl8187_priv *priv = dev->priv; + + if (led->dev) + return -EEXIST; + if (!default_trigger) + return -EINVAL; + led->dev = dev; + led->ledpin = ledpin; + strncpy(led->name, name, sizeof(led->name)); + + led->led_dev.name = led->name; + led->led_dev.default_trigger = default_trigger; + led->led_dev.brightness_set = rtl8187_led_brightness_set; + + err = led_classdev_register(&priv->udev->dev, &led->led_dev); + if (err) { + printk(KERN_INFO "LEDs: Failed to register %s\n", name); + led->dev = NULL; + return err; + } + return 0; +} + +static void rtl8187_unregister_led(struct rtl8187_led *led) +{ + led_classdev_unregister(&led->led_dev); + led->dev = NULL; +} + +void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid) +{ + struct rtl8187_priv *priv = dev->priv; + char name[RTL8187_LED_MAX_NAME_LEN + 1]; + u8 ledpin; + int err; + + /* According to the vendor driver, the LED operation depends on the + * customer ID encoded in the EEPROM + */ + printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid); + switch (custid) { + case EEPROM_CID_RSVD0: + case EEPROM_CID_RSVD1: + case EEPROM_CID_SERCOMM_PS: + case EEPROM_CID_QMI: + case EEPROM_CID_DELL: + case EEPROM_CID_TOSHIBA: + ledpin = LED_PIN_GPIO0; + break; + case EEPROM_CID_ALPHA0: + ledpin = LED_PIN_LED0; + break; + case EEPROM_CID_HW: + ledpin = LED_PIN_HW; + break; + default: + ledpin = LED_PIN_GPIO0; + } + + INIT_DELAYED_WORK(&priv->led_on, led_turn_on); + INIT_DELAYED_WORK(&priv->led_off, led_turn_off); + + snprintf(name, sizeof(name), + "rtl8187-%s::tx", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_tx, name, + ieee80211_get_tx_led_name(dev), ledpin); + if (err) + goto error; + snprintf(name, sizeof(name), + "rtl8187-%s::rx", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_rx, name, + ieee80211_get_rx_led_name(dev), ledpin); + if (!err) { + queue_delayed_work(dev->workqueue, &priv->led_on, 0); + return; + } + /* registration of RX LED failed - unregister TX */ + rtl8187_unregister_led(&priv->led_tx); +error: + /* If registration of either failed, cancel delayed work */ + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); +} + +void rtl8187_leds_exit(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + + rtl8187_unregister_led(&priv->led_tx); + /* turn the LED off before exiting */ + queue_delayed_work(dev->workqueue, &priv->led_off, 0); + cancel_delayed_work_sync(&priv->led_off); + rtl8187_unregister_led(&priv->led_rx); +} +#endif /* def CONFIG_RTL8187_LED */ + diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187_leds.h new file mode 100644 index 000000000000..a0332027aead --- /dev/null +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.h @@ -0,0 +1,57 @@ +/* + * Definitions for RTL8187 leds + * + * Copyright 2009 Larry Finger + * + * Based on the LED handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef RTL8187_LED_H +#define RTL8187_LED_H + +#ifdef CONFIG_RTL8187_LEDS + +#define RTL8187_LED_MAX_NAME_LEN 21 + +#include +#include + +enum { + LED_PIN_LED0, + LED_PIN_LED1, + LED_PIN_GPIO0, + LED_PIN_HW +}; + +enum { + EEPROM_CID_RSVD0 = 0x00, + EEPROM_CID_RSVD1 = 0xFF, + EEPROM_CID_ALPHA0 = 0x01, + EEPROM_CID_SERCOMM_PS = 0x02, + EEPROM_CID_HW = 0x03, + EEPROM_CID_TOSHIBA = 0x04, + EEPROM_CID_QMI = 0x07, + EEPROM_CID_DELL = 0x08 +}; + +struct rtl8187_led { + struct ieee80211_hw *dev; + /* The LED class device */ + struct led_classdev led_dev; + /* The pin/method used to control the led */ + u8 ledpin; + /* The unique name string for this LED device. */ + char name[RTL8187_LED_MAX_NAME_LEN + 1]; +}; + +void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code); +void rtl8187_leds_exit(struct ieee80211_hw *dev); + +#endif /* def CONFIG_RTL8187_LED */ + +#endif /* RTL8187_LED_H */ -- 2.20.1