From 9f7eb31af2968a194b29f67ec10776685a81afc9 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 13 May 2016 23:41:29 +0300 Subject: [PATCH] drm/i915: Unify SKL cdclk init paths MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Currently we initialize cdclk on SKL from two different places, depending on whether it's during driver init or resume. Let's unify it to happen from the same place always, and that place will be the display core init function. To do this we first run through the cdclk sanitation code, which will first verify that the PLL is programmed correctly, after which we can read out the current cdclk frequency, and once the cdclk is known we verify that the cdclk "decimal" frequency is programmed correctly. If any of these fail we will force a cdclk change, and to be safe we also force the PLL to be turned off and on again. If the sanitation step didn't notice anything amiss, we'll skip the cdclk programming which will prevent cdclk reprogramming when the displays might be active. We can also toss in a few WARNs about the register values into skl_update_dpll0() since we now know that the PLL state should always be sane when that function is called. Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-11-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak --- drivers/gpu/drm/i915/intel_display.c | 40 +++++++++++++++++++------ drivers/gpu/drm/i915/intel_dpll_mgr.c | 11 ++----- drivers/gpu/drm/i915/intel_drv.h | 1 - drivers/gpu/drm/i915/intel_runtime_pm.c | 5 +--- 4 files changed, 34 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b2adb01671be..58b8d759eaaa 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5497,8 +5497,15 @@ skl_dpll0_update(struct drm_i915_private *dev_priv) return; } + WARN_ON((val & LCPLL_PLL_LOCK) == 0); + val = I915_READ(DPLL_CTRL1); + WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | + DPLL_CTRL1_SSC(SKL_DPLL0) | + DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != + DPLL_CTRL1_OVERRIDE(SKL_DPLL0)); + switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): @@ -5668,6 +5675,8 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv, int cdclk, int vco) intel_update_cdclk(dev); } +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv); + void skl_uninit_cdclk(struct drm_i915_private *dev_priv) { /* disable DBUF power */ @@ -5684,10 +5693,19 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv) void skl_init_cdclk(struct drm_i915_private *dev_priv) { - /* DPLL0 not enabled (happens on early BIOS versions) */ - if (dev_priv->skl_vco_freq == 0) { - int cdclk, vco; + int cdclk, vco; + + skl_sanitize_cdclk(dev_priv); + if (dev_priv->cdclk_freq != 0 && dev_priv->skl_vco_freq != 0) { + /* + * Use the current vco as our initial + * guess as to what the preferred vco is. + */ + if (dev_priv->skl_preferred_vco_freq == 0) + skl_set_preferred_cdclk_vco(dev_priv, + dev_priv->skl_vco_freq); + } else { /* set CDCLK to the lowest frequency, Modeset follows */ vco = dev_priv->skl_preferred_vco_freq; if (vco == 0) @@ -5707,7 +5725,7 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv) DRM_ERROR("DBuf power enable timeout\n"); } -int skl_sanitize_cdclk(struct drm_i915_private *dev_priv) +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) { uint32_t cdctl, expected; @@ -5730,6 +5748,8 @@ int skl_sanitize_cdclk(struct drm_i915_private *dev_priv) DPLL_CTRL1_OVERRIDE(SKL_DPLL0)) goto sanitize; + intel_update_cdclk(dev_priv->dev); + /* DPLL okay; verify the cdclock * * Noticed in some instances that the freq selection is correct but @@ -5741,13 +5761,15 @@ int skl_sanitize_cdclk(struct drm_i915_private *dev_priv) skl_cdclk_decimal(dev_priv->cdclk_freq); if (cdctl == expected) /* All well; nothing to sanitize */ - return false; -sanitize: + return; - skl_init_cdclk(dev_priv); +sanitize: + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); - /* we did have to sanitize */ - return true; + /* force cdclk programming */ + dev_priv->cdclk_freq = 0; + /* force full PLL disable + enable */ + dev_priv->skl_vco_freq = -1; } /* Adjust CDclk dividers to allow high res or save power if possible */ diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 34ec149fde85..6b70e1eccb13 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1630,17 +1630,10 @@ static const struct intel_shared_dpll_funcs bxt_ddi_pll_funcs = { static void intel_ddi_pll_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t val = I915_READ(LCPLL_CTL); - if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) { - if (skl_sanitize_cdclk(dev_priv)) - DRM_DEBUG_KMS("Sanitized cdclk programmed by pre-os\n"); + if (INTEL_GEN(dev_priv) < 9) { + uint32_t val = I915_READ(LCPLL_CTL); - /* We'll want to keep using the current vco from now on */ - if (dev_priv->skl_vco_freq != 0) - skl_set_preferred_cdclk_vco(dev_priv, - dev_priv->skl_vco_freq); - } else if (!IS_BROXTON(dev_priv)) { /* * The LCPLL register should be turned on by the BIOS. For now * let's just check its state and print errors in case diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 2bee217e6ae5..3854b2ee1077 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1279,7 +1279,6 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv); void bxt_disable_dc9(struct drm_i915_private *dev_priv); void gen9_enable_dc5(struct drm_i915_private *dev_priv); void skl_init_cdclk(struct drm_i915_private *dev_priv); -int skl_sanitize_cdclk(struct drm_i915_private *dev_priv); void skl_uninit_cdclk(struct drm_i915_private *dev_priv); unsigned int skl_cdclk_get_vco(unsigned int freq); void skl_enable_dc6(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index b69b935516fb..fefe22c3c163 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -2200,12 +2200,9 @@ static void skl_display_core_init(struct drm_i915_private *dev_priv, mutex_unlock(&power_domains->lock); - if (!resume) - return; - skl_init_cdclk(dev_priv); - if (dev_priv->csr.dmc_payload) + if (resume && dev_priv->csr.dmc_payload) intel_csr_load_program(dev_priv); } -- 2.20.1