From 9f6bd88dafe9eac86fc90b6c0731ebfb470b5489 Mon Sep 17 00:00:00 2001 From: Xenia Ragiadakou Date: Wed, 22 May 2013 18:22:39 +0300 Subject: [PATCH] rtl8192u: fix whitespace after '(' and before ')' in r8192U_core.c This patch removes whitespace after '(' and before ')' following the kernel coding style. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/r8192U_core.c | 86 +++++++++++++------------- 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 4cb97927d5fa..1a40f1d77082 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -136,7 +136,7 @@ static int channels = 0x3fff; -module_param(ifname, charp, S_IRUGO|S_IWUSR ); +module_param(ifname, charp, S_IRUGO|S_IWUSR); //module_param(hwseqnum,int, S_IRUGO|S_IWUSR); module_param(hwwep,int, S_IRUGO|S_IWUSR); module_param(channels,int, S_IRUGO|S_IWUSR); @@ -264,12 +264,12 @@ void CamResetAllEntry(struct net_device *dev) void write_cam(struct net_device *dev, u8 addr, u32 data) { write_nic_dword(dev, WCAMI, data); - write_nic_dword(dev, RWCAM, BIT31|BIT16|(addr&0xff) ); + write_nic_dword(dev, RWCAM, BIT31|BIT16|(addr&0xff)); } u32 read_cam(struct net_device *dev, u8 addr) { - write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff) ); + write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff)); return read_nic_dword(dev, 0xa8); } @@ -757,7 +757,7 @@ void rtl8192_dump_reg(struct net_device *dev) for (n = 0; n <= max;) { - printk( "\nD: %2x> ", n); + printk("\nD: %2x> ", n); for (i = 0; i < 16 && n <= max; i++,n++) printk("%2x ",read_nic_byte(dev,n)); } @@ -936,7 +936,7 @@ void rtl8192_set_rxconf(struct net_device *dev) rxconf = rxconf | RCR_APWRMGT; } - if ( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) + if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) rxconf = rxconf | RCR_ACRC32; @@ -1655,7 +1655,7 @@ void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate) } inline u8 rtl8192_IsWirelessBMode(u16 rate) { - if ( ((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220) ) + if (((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220)) return 1; else return 0; } @@ -1673,9 +1673,9 @@ u16 ComputeTxTime( u16 N_DBPS; u16 Ceiling; - if ( rtl8192_IsWirelessBMode(DataRate) ) + if (rtl8192_IsWirelessBMode(DataRate)) { - if ( bManagementFrame || !bShortPreamble || DataRate == 10 ) + if (bManagementFrame || !bShortPreamble || DataRate == 10) { // long preamble FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10))); } @@ -1683,7 +1683,7 @@ u16 ComputeTxTime( { // Short preamble FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10))); } - if ( ( FrameLength*8 % (DataRate/10) ) != 0 ) //Get the Ceilling + if ((FrameLength*8 % (DataRate/10)) != 0) //Get the Ceilling FrameTime ++; } else { //802.11g DSSS-OFDM PLCP length field calculation. N_DBPS = N_DBPSOfRate(DataRate); @@ -1950,7 +1950,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) * without interleaves * !!! For debug purpose */ - if ( pend > MAX_TX_URB){ + if (pend > MAX_TX_URB){ printk("To discard skb packet!\n"); dev_kfree_skb_any(skb); return -1; @@ -2630,7 +2630,7 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) } } #ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we should wait for FPGA - ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting ); + ActUpdateChannelAccessSetting(pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting); #endif priv->ieee80211->mode = wireless_mode; @@ -3574,7 +3574,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev) } else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) && ((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) || - (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M)) ) + (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M))) { if (rx_chk_cnt < 2) { @@ -3672,7 +3672,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) rfState = priv->ieee80211->eRFPowerState; TxResetType = TxCheckStuck(dev); - if ( rfState != eRfOff || + if (rfState != eRfOff || /*ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&*/ (priv->ieee80211->iw_mode != IW_MODE_ADHOC)) { @@ -3704,7 +3704,7 @@ int rtl8192_close(struct net_device *dev); void -CamRestoreAllEntry( struct net_device *dev) +CamRestoreAllEntry(struct net_device *dev) { u8 EntryId = 0; struct r8192_priv *priv = ieee80211_priv(dev); @@ -4007,7 +4007,7 @@ void rtl819x_update_rxcounts( SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum); priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod; priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod; - for ( i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){ + for (i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++){ *TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i]; *TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i]; } @@ -4031,8 +4031,8 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) {//to get busy traffic condition if (ieee->state == IEEE80211_LINKED) { - if ( ieee->LinkDetectInfo.NumRxOkInPeriod > 666 || - ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) { + if (ieee->LinkDetectInfo.NumRxOkInPeriod > 666 || + ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) { bBusyTraffic = true; } ieee->LinkDetectInfo.NumRxOkInPeriod = 0; @@ -4076,7 +4076,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) //DbgPrint("Start to check silent reset\n"); } // RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType); - if ( (priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET && + if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET && (priv->bForcedSilentReset || (!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo { @@ -4364,13 +4364,13 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) if (ieee->group_key_type) { - setKey( dev, - ipw->u.crypt.idx, - ipw->u.crypt.idx, //KeyIndex - ieee->group_key_type, //KeyType - broadcast_addr, //MacAddr - 0, //DefaultKey - key); //KeyContent + setKey(dev, + ipw->u.crypt.idx, + ipw->u.crypt.idx, //KeyIndex + ieee->group_key_type, //KeyType + broadcast_addr, //MacAddr + 0, //DefaultKey + key); //KeyContent } } } @@ -4379,7 +4379,7 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) printk("@@ wrq->u pointer = "); for (i = 0; i < wrq->u.data.length; i++){ if (i%10 == 0) printk("\n"); - printk( "%8x|", ((u32 *)wrq->u.data.pointer)[i] ); + printk("%8x|", ((u32 *)wrq->u.data.pointer)[i]); } printk("\n"); #endif /*JOHN_HWSEC_DEBUG*/ @@ -4482,7 +4482,7 @@ void UpdateRxPktTimeStamp8190 (struct net_device *dev, struct ieee80211_rx_stats //by amy 080606 -long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index. +long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index. { long signal_power; // in dBm. @@ -4586,17 +4586,17 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) { priv->stats.rx_rssi_percentage[rfpath] = - ( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) + + ((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) + (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor); priv->stats.rx_rssi_percentage[rfpath] = priv->stats.rx_rssi_percentage[rfpath] + 1; } else { priv->stats.rx_rssi_percentage[rfpath] = - ( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) + + ((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) + (pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor); } - RT_TRACE(COMP_DBG,"priv->stats.rx_rssi_percentage[rfPath] = %d \n" ,priv->stats.rx_rssi_percentage[rfpath] ); + RT_TRACE(COMP_DBG,"priv->stats.rx_rssi_percentage[rfPath] = %d \n" ,priv->stats.rx_rssi_percentage[rfpath]); } } @@ -4645,14 +4645,14 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) { priv->undecorated_smoothed_pwdb = - ( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) + + (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) + (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor); priv->undecorated_smoothed_pwdb = priv->undecorated_smoothed_pwdb + 1; } else { priv->undecorated_smoothed_pwdb = - ( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) + + (((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) + (pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor); } @@ -4699,7 +4699,7 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream]; } priv->stats.rx_evm_percentage[nspatial_stream] = - ( (priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) + + ((priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) + (pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor); } } @@ -5006,7 +5006,7 @@ static void rtl8192_query_rxphystatus( // //Fixed by Jacken from Bryant 2008-03-20 //Original value is 106 - rx_pwr_all = (((pofdm_buf->pwdb_all ) >> 1 )& 0x7f) -106; + rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1)& 0x7f) -106; pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all); pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all; @@ -5108,7 +5108,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, /* Check if the received packet is acceptable. */ bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) && - (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) + (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS)? hdr->addr2 : hdr->addr3)) && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr)); @@ -5911,13 +5911,13 @@ void EnableHWSecurityConfig8192(struct net_device *dev) } -void setKey( struct net_device *dev, - u8 EntryNo, - u8 KeyIndex, - u16 KeyType, - u8 *MacAddr, - u8 DefaultKey, - u32 *KeyContent ) +void setKey(struct net_device *dev, + u8 EntryNo, + u8 KeyIndex, + u16 KeyType, + u8 *MacAddr, + u8 DefaultKey, + u32 *KeyContent) { u32 TargetCommand = 0; u32 TargetContent = 0; @@ -5959,7 +5959,7 @@ void setKey( struct net_device *dev, else { //Key Material if (KeyContent != NULL){ - write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)) ); + write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2))); write_nic_dword(dev, RWCAM, TargetCommand); } } -- 2.20.1