From 9c745995ae5c4ff787f34a359de908facc11ee00 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 23 Apr 2012 15:06:09 +0200 Subject: [PATCH] usb-xhci: Handle COMP_TX_ERR for isoc tds While testing unplugging an UVC HD webcam with usb-redirection (so through usbdevfs), my userspace usb-redir code was getting a value of -1 in iso_frame_desc[n].status, which according to Documentation/usb/error-codes.txt is not a valid value. The source of this -1 is the default case in xhci-ring.c:process_isoc_td() adding a kprintf there showed the value of trb_comp_code to be COMP_TX_ERR in this case, so this patch adds handling for that completion code to process_isoc_td(). This was observed and tested with the following xhci controller: 1033:0194 NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) Note: I also wonder if setting frame->status to -1 (-EPERM) is the best we can do, but since I cannot come up with anything better I've left that as is. This patch should be backported to kernels as old as 2.6.36, which contain the commit 04e51901dd44f40a5a385ced897f6bca87d5f40a "USB: xHCI: Isochronous transfer implementation". Signed-off-by: Hans de Goede Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cb1de111daee..d40194c8ca60 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1804,6 +1804,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + case COMP_TX_ERR: frame->status = -EPROTO; skip_td = true; break; -- 2.20.1