From 9c5320c8ea8b8423edca2c40cd559f1ce9496dab Mon Sep 17 00:00:00 2001 From: Jacob Shin Date: Thu, 4 Apr 2013 16:19:04 +0000 Subject: [PATCH] cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor Future AMD processors, starting with Family 16h, can provide software with feedback on how the workload may respond to frequency change -- memory-bound workloads will not benefit from higher frequency, where as compute-bound workloads will. This patch enables this "frequency sensitivity feedback" to aid the ondemand governor to make better frequency change decisions by hooking into the powersave bias. Signed-off-by: Jacob Shin Acked-by: Thomas Renninger Acked-by: Borislav Petkov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/governors.txt | 21 ++++ arch/x86/include/asm/cpufeature.h | 1 + arch/x86/kernel/cpu/scattered.c | 3 +- drivers/cpufreq/Kconfig.x86 | 17 +++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/amd_freq_sensitivity.c | 148 +++++++++++++++++++++++++ 6 files changed, 190 insertions(+), 1 deletion(-) create mode 100644 drivers/cpufreq/amd_freq_sensitivity.c diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 4dfed30b7fda..66f9cc310686 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -167,6 +167,27 @@ of load evaluation and helping the CPU stay at its top speed when truly busy, rather than shifting back and forth in speed. This tunable has no effect on behavior at lower speeds/lower CPU loads. +powersave_bias: this parameter takes a value between 0 to 1000. It +defines the percentage (times 10) value of the target frequency that +will be shaved off of the target. For example, when set to 100 -- 10%, +when ondemand governor would have targeted 1000 MHz, it will target +1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0 +(disabled) by default. +When AMD frequency sensitivity powersave bias driver -- +drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter +defines the workload frequency sensitivity threshold in which a lower +frequency is chosen instead of ondemand governor's original target. +The frequency sensitivity is a hardware reported (on AMD Family 16h +Processors and above) value between 0 to 100% that tells software how +the performance of the workload running on a CPU will change when +frequency changes. A workload with sensitivity of 0% (memory/IO-bound) +will not perform any better on higher core frequency, whereas a +workload with sensitivity of 100% (CPU-bound) will perform better +higher the frequency. When the driver is loaded, this is set to 400 +by default -- for CPUs running workloads with sensitivity value below +40%, a lower frequency is chosen. Unloading the driver or writing 0 +will disable this feature. + 2.5 Conservative ---------------- diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 93fe929d1cee..9e22520a97ee 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -182,6 +182,7 @@ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ #define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ +#define X86_FEATURE_PROC_FEEDBACK (7*32+ 9) /* AMD ProcFeedbackInterface */ /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c index ee8e9abc859f..d92b5dad15dd 100644 --- a/arch/x86/kernel/cpu/scattered.c +++ b/arch/x86/kernel/cpu/scattered.c @@ -39,8 +39,9 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) { X86_FEATURE_APERFMPERF, CR_ECX, 0, 0x00000006, 0 }, { X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 }, { X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 }, - { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 }, { X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 }, + { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 }, + { X86_FEATURE_PROC_FEEDBACK, CR_EDX,11, 0x80000007, 0 }, { X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 }, { X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 }, { X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 }, diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index d7dc0ed6adb0..2b8a8c374548 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -129,6 +129,23 @@ config X86_POWERNOW_K8 For details, take a look at . +config X86_AMD_FREQ_SENSITIVITY + tristate "AMD frequency sensitivity feedback powersave bias" + depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + This adds AMD-specific powersave bias function to the ondemand + governor, which allows it to make more power-conscious frequency + change decisions based on feedback from hardware (availble on AMD + Family 16h and above). + + Hardware feedback tells software how "sensitive" to frequency changes + the CPUs' workloads are. CPU-bound workloads will be more sensitive + -- they will perform better as frequency increases. Memory/IO-bound + workloads will be less sensitive -- they will not necessarily perform + better as frequency increases. + + If in doubt, say N. + config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" depends on X86_32 && PCI diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 17417c7ee135..a264dd302c34 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o +obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o ################################################################################## # ARM SoC drivers diff --git a/drivers/cpufreq/amd_freq_sensitivity.c b/drivers/cpufreq/amd_freq_sensitivity.c new file mode 100644 index 000000000000..f6b79ab0070b --- /dev/null +++ b/drivers/cpufreq/amd_freq_sensitivity.c @@ -0,0 +1,148 @@ +/* + * amd_freq_sensitivity.c: AMD frequency sensitivity feedback powersave bias + * for the ondemand governor. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * + * Author: Jacob Shin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "cpufreq_governor.h" + +#define MSR_AMD64_FREQ_SENSITIVITY_ACTUAL 0xc0010080 +#define MSR_AMD64_FREQ_SENSITIVITY_REFERENCE 0xc0010081 +#define CLASS_CODE_SHIFT 56 +#define POWERSAVE_BIAS_MAX 1000 +#define POWERSAVE_BIAS_DEF 400 + +struct cpu_data_t { + u64 actual; + u64 reference; + unsigned int freq_prev; +}; + +static DEFINE_PER_CPU(struct cpu_data_t, cpu_data); + +static unsigned int amd_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, + unsigned int relation) +{ + int sensitivity; + long d_actual, d_reference; + struct msr actual, reference; + struct cpu_data_t *data = &per_cpu(cpu_data, policy->cpu); + struct dbs_data *od_data = policy->governor_data; + struct od_dbs_tuners *od_tuners = od_data->tuners; + struct od_cpu_dbs_info_s *od_info = + od_data->cdata->get_cpu_dbs_info_s(policy->cpu); + + if (!od_info->freq_table) + return freq_next; + + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, + &actual.l, &actual.h); + rdmsr_on_cpu(policy->cpu, MSR_AMD64_FREQ_SENSITIVITY_REFERENCE, + &reference.l, &reference.h); + actual.h &= 0x00ffffff; + reference.h &= 0x00ffffff; + + /* counter wrapped around, so stay on current frequency */ + if (actual.q < data->actual || reference.q < data->reference) { + freq_next = policy->cur; + goto out; + } + + d_actual = actual.q - data->actual; + d_reference = reference.q - data->reference; + + /* divide by 0, so stay on current frequency as well */ + if (d_reference == 0) { + freq_next = policy->cur; + goto out; + } + + sensitivity = POWERSAVE_BIAS_MAX - + (POWERSAVE_BIAS_MAX * (d_reference - d_actual) / d_reference); + + clamp(sensitivity, 0, POWERSAVE_BIAS_MAX); + + /* this workload is not CPU bound, so choose a lower freq */ + if (sensitivity < od_tuners->powersave_bias) { + if (data->freq_prev == policy->cur) + freq_next = policy->cur; + + if (freq_next > policy->cur) + freq_next = policy->cur; + else if (freq_next < policy->cur) + freq_next = policy->min; + else { + unsigned int index; + + cpufreq_frequency_table_target(policy, + od_info->freq_table, policy->cur - 1, + CPUFREQ_RELATION_H, &index); + freq_next = od_info->freq_table[index].frequency; + } + + data->freq_prev = freq_next; + } else + data->freq_prev = 0; + +out: + data->actual = actual.q; + data->reference = reference.q; + return freq_next; +} + +static int __init amd_freq_sensitivity_init(void) +{ + u64 val; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return -ENODEV; + + if (!static_cpu_has(X86_FEATURE_PROC_FEEDBACK)) + return -ENODEV; + + if (rdmsrl_safe(MSR_AMD64_FREQ_SENSITIVITY_ACTUAL, &val)) + return -ENODEV; + + if (!(val >> CLASS_CODE_SHIFT)) + return -ENODEV; + + od_register_powersave_bias_handler(amd_powersave_bias_target, + POWERSAVE_BIAS_DEF); + return 0; +} +late_initcall(amd_freq_sensitivity_init); + +static void __exit amd_freq_sensitivity_exit(void) +{ + od_unregister_powersave_bias_handler(); +} +module_exit(amd_freq_sensitivity_exit); + +static const struct x86_cpu_id amd_freq_sensitivity_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_PROC_FEEDBACK), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, amd_freq_sensitivity_ids); + +MODULE_AUTHOR("Jacob Shin "); +MODULE_DESCRIPTION("AMD frequency sensitivity feedback powersave bias for " + "the ondemand governor."); +MODULE_LICENSE("GPL"); -- 2.20.1