From 9b744942290c168287013f0a19ff7392f65c8107 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 16 May 2014 16:14:03 +0200 Subject: [PATCH] net: phy: decouple PHY id and PHY address in fixed PHY driver Until now, the fixed_phy_add() function was taking as argument 'phy_id', which was used both as the PHY address on the fake fixed MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and MII_PHYSID2 registers. However, those two informations are completely unrelated. This patch decouples them. The PHY id of fixed PHYs is hardcoded to be 0x0. Ideally, a really reserved value would be nicer, but there doesn't seem to be an easy of making sure a dummy value can be assigned to the Linux kernel for such usage. The PHY address remains passed by the caller of phy_fixed_add(). Signed-off-by: Thomas Petazzoni Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/fixed.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index ba55adfc7aae..e41546da105e 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -31,7 +31,7 @@ struct fixed_mdio_bus { }; struct fixed_phy { - int id; + int addr; u16 regs[MII_REGS_NUM]; struct phy_device *phydev; struct fixed_phy_status status; @@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct fixed_phy *fp) if (fp->status.asym_pause) lpa |= LPA_PAUSE_ASYM; - fp->regs[MII_PHYSID1] = fp->id >> 16; - fp->regs[MII_PHYSID2] = fp->id; + fp->regs[MII_PHYSID1] = 0; + fp->regs[MII_PHYSID2] = 0; fp->regs[MII_BMSR] = bmsr; fp->regs[MII_BMCR] = bmcr; @@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct fixed_phy *fp) return 0; } -static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) +static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) { struct fixed_mdio_bus *fmb = bus->priv; struct fixed_phy *fp; @@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) return -1; list_for_each_entry(fp, &fmb->phys, node) { - if (fp->id == phy_id) { + if (fp->addr == phy_addr) { /* Issue callback if user registered it. */ if (fp->link_update) { fp->link_update(fp->phydev->attached_dev, @@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num) return 0xFFFF; } -static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num, +static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num, u16 val) { return 0; @@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev, return -EINVAL; list_for_each_entry(fp, &fmb->phys, node) { - if (fp->id == phydev->phy_id) { + if (fp->addr == phydev->addr) { fp->link_update = link_update; fp->phydev = phydev; return 0; @@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev, } EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); -int fixed_phy_add(unsigned int irq, int phy_id, +int fixed_phy_add(unsigned int irq, int phy_addr, struct fixed_phy_status *status) { int ret; @@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int phy_id, memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM); - fmb->irqs[phy_id] = irq; + fmb->irqs[phy_addr] = irq; - fp->id = phy_id; + fp->addr = phy_addr; fp->status = *status; ret = fixed_phy_update_regs(fp); -- 2.20.1