From 9b652900dc6663743b70fea44f9f8d9957c01452 Mon Sep 17 00:00:00 2001 From: Danny Wood Date: Sun, 30 Sep 2018 09:16:06 +0100 Subject: [PATCH] universal7580: Add gralloc header Change-Id: Id10d2f3e871cf6984894ab160db2acf3640e898e --- include/hardware/gralloc.h | 427 +++++++++++++++++++++++++++++++++++++ 1 file changed, 427 insertions(+) create mode 100644 include/hardware/gralloc.h diff --git a/include/hardware/gralloc.h b/include/hardware/gralloc.h new file mode 100644 index 0000000..7c30fbd --- /dev/null +++ b/include/hardware/gralloc.h @@ -0,0 +1,427 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +#ifndef ANDROID_GRALLOC_INTERFACE_H +#define ANDROID_GRALLOC_INTERFACE_H + +#include +#include + +#include +#include +#include + +#include + +#include +#include + +__BEGIN_DECLS + +/** + * Module versioning information for the Gralloc hardware module, based on + * gralloc_module_t.common.module_api_version. + * + * Version History: + * + * GRALLOC_MODULE_API_VERSION_0_1: + * Initial Gralloc hardware module API. + * + * GRALLOC_MODULE_API_VERSION_0_2: + * Add support for flexible YCbCr format with (*lock_ycbcr)() method. + * + * GRALLOC_MODULE_API_VERSION_0_3: + * Add support for fence passing to/from lock/unlock. + */ + +#define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1) +#define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2) +#define GRALLOC_MODULE_API_VERSION_0_3 HARDWARE_MODULE_API_VERSION(0, 3) + +#define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1) + +/** + * The id of this module + */ +#define GRALLOC_HARDWARE_MODULE_ID "gralloc" + +/** + * Name of the graphics device to open + */ + +#define GRALLOC_HARDWARE_GPU0 "gpu0" + +enum { + /* buffer is never read in software */ + GRALLOC_USAGE_SW_READ_NEVER = 0x00000000U, + /* buffer is rarely read in software */ + GRALLOC_USAGE_SW_READ_RARELY = 0x00000002U, + /* buffer is often read in software */ + GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003U, + /* mask for the software read values */ + GRALLOC_USAGE_SW_READ_MASK = 0x0000000FU, + + /* buffer is never written in software */ + GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000U, + /* buffer is rarely written in software */ + GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020U, + /* buffer is often written in software */ + GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030U, + /* mask for the software write values */ + GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0U, + + /* buffer will be used as an OpenGL ES texture */ + GRALLOC_USAGE_HW_TEXTURE = 0x00000100U, + /* buffer will be used as an OpenGL ES render target */ + GRALLOC_USAGE_HW_RENDER = 0x00000200U, + /* buffer will be used by the 2D hardware blitter */ + GRALLOC_USAGE_HW_2D = 0x00000400U, + /* buffer will be used by the HWComposer HAL module */ + GRALLOC_USAGE_HW_COMPOSER = 0x00000800U, + /* buffer will be used with the framebuffer device */ + GRALLOC_USAGE_HW_FB = 0x00001000U, + + /* buffer should be displayed full-screen on an external display when + * possible */ + GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000U, + + /* Must have a hardware-protected path to external display sink for + * this buffer. If a hardware-protected path is not available, then + * either don't composite only this buffer (preferred) to the + * external sink, or (less desirable) do not route the entire + * composition to the external sink. */ + GRALLOC_USAGE_PROTECTED = 0x00004000U, + + /* buffer may be used as a cursor */ + GRALLOC_USAGE_CURSOR = 0x00008000U, + + /* buffer will be used with the HW video encoder */ + GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000U, + /* buffer will be written by the HW camera pipeline */ + GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000U, + /* buffer will be read by the HW camera pipeline */ + GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000U, + /* buffer will be used as part of zero-shutter-lag queue */ + GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000U, + /* mask for the camera access values */ + GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000, + /* buffer will be used by the HW IPs when sysmmu is off */ + GRALLOC_USAGE_PHYSICALLY_LINEAR = 0x01000000U, + /* mask for the software usage bit-mask */ + GRALLOC_USAGE_HW_MASK = 0x00079F00U, + + /* buffer will be used as a RenderScript Allocation */ + GRALLOC_USAGE_RENDERSCRIPT = 0x00100000U, + + /* Set by the consumer to indicate to the producer that they may attach a + * buffer that they did not detach from the BufferQueue. Will be filtered + * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to + * handle this flag. */ + GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000U, + + /* Mask of all flags which could be passed to a gralloc module for buffer + * allocation. Any flags not in this mask do not need to be handled by + * gralloc modules. */ + GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS), + + /* implementation-specific private usage flags */ + GRALLOC_USAGE_PRIVATE_0 = 0x10000000U, + GRALLOC_USAGE_PRIVATE_1 = 0x20000000U, + GRALLOC_USAGE_PRIVATE_2 = 0x40000000U, + GRALLOC_USAGE_PRIVATE_3 = 0x80000000U, + GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000U, + + GRALLOC_USAGE_INTERNAL_ONLY = 0x10000000, + GRALLOC_USAGE_EXTERNAL_FLEXIBLE = 0x20000000, + GRALLOC_USAGE_EXTERNAL_BLOCK = 0x40000000, + GRALLOC_USAGE_EXTERNAL_ONLY = 0x80000000, + GRALLOC_USAGE_EXTERNAL_VIRTUALFB = 0x00400000, + GRALLOC_USAGE_PRIVATE_NONSECURE = 0x02000000, + GRALLOC_USAGE_GPU_BUFFER = 0x00800000, +}; + +/*****************************************************************************/ + +/** + * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM + * and the fields of this data structure must begin with hw_module_t + * followed by module specific information. + */ +typedef struct gralloc_module_t { + struct hw_module_t common; + + /* + * (*registerBuffer)() must be called before a buffer_handle_t that has not + * been created with (*alloc_device_t::alloc)() can be used. + * + * This is intended to be used with buffer_handle_t's that have been + * received in this process through IPC. + * + * This function checks that the handle is indeed a valid one and prepares + * it for use with (*lock)() and (*unlock)(). + * + * It is not necessary to call (*registerBuffer)() on a handle created + * with (*alloc_device_t::alloc)(). + * + * returns an error if this buffer_handle_t is not valid. + */ + int (*registerBuffer)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + /* + * (*unregisterBuffer)() is called once this handle is no longer needed in + * this process. After this call, it is an error to call (*lock)(), + * (*unlock)(), or (*registerBuffer)(). + * + * This function doesn't close or free the handle itself; this is done + * by other means, usually through libcutils's native_handle_close() and + * native_handle_free(). + * + * It is an error to call (*unregisterBuffer)() on a buffer that wasn't + * explicitly registered first. + */ + int (*unregisterBuffer)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + /* + * The (*lock)() method is called before a buffer is accessed for the + * specified usage. This call may block, for instance if the h/w needs + * to finish rendering or if CPU caches need to be synchronized. + * + * The caller promises to modify only pixels in the area specified + * by (l,t,w,h). + * + * The content of the buffer outside of the specified area is NOT modified + * by this call. + * + * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address + * of the buffer in virtual memory. + * + * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail + * and return -EINVAL. These buffers must be locked with (*lock_ycbcr)() + * instead. + * + * THREADING CONSIDERATIONS: + * + * It is legal for several different threads to lock a buffer from + * read access, none of the threads are blocked. + * + * However, locking a buffer simultaneously for write or read/write is + * undefined, but: + * - shall not result in termination of the process + * - shall not block the caller + * It is acceptable to return an error or to leave the buffer's content + * into an indeterminate state. + * + * If the buffer was created with a usage mask incompatible with the + * requested usage flags here, -EINVAL is returned. + * + */ + + int (*lock)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + void** vaddr); + + /* + * The (*unlock)() method must be called after all changes to the buffer + * are completed. + */ + + int (*unlock)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + /* reserved for future use */ + int (*perform)(struct gralloc_module_t const* module, + int operation, ... ); + + /* + * The (*lock_ycbcr)() method is like the (*lock)() method, with the + * difference that it fills a struct ycbcr with a description of the buffer + * layout, and zeroes out the reserved fields. + * + * If the buffer format is not compatible with a flexible YUV format (e.g. + * the buffer layout cannot be represented with the ycbcr struct), it + * will return -EINVAL. + * + * This method must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888 + * if supported by the device, as well as with any other format that is + * requested by the multimedia codecs when they are configured with a + * flexible-YUV-compatible color-format with android native buffers. + * + * Note that this method may also be called on buffers of other formats, + * including non-YUV formats. + * + * Added in GRALLOC_MODULE_API_VERSION_0_2. + */ + + int (*lock_ycbcr)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + struct android_ycbcr *ycbcr); + + /* + * The (*lockAsync)() method is like the (*lock)() method except + * that the buffer's sync fence object is passed into the lock + * call instead of requiring the caller to wait for completion. + * + * The gralloc implementation takes ownership of the fenceFd and + * is responsible for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*lockAsync)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + void** vaddr, int fenceFd); + + /* + * The (*unlockAsync)() method is like the (*unlock)() method + * except that a buffer sync fence object is returned from the + * lock call, representing the completion of any pending work + * performed by the gralloc implementation. + * + * The caller takes ownership of the fenceFd and is responsible + * for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*unlockAsync)(struct gralloc_module_t const* module, + buffer_handle_t handle, int* fenceFd); + + /* + * The (*lockAsync_ycbcr)() method is like the (*lock_ycbcr)() + * method except that the buffer's sync fence object is passed + * into the lock call instead of requiring the caller to wait for + * completion. + * + * The gralloc implementation takes ownership of the fenceFd and + * is responsible for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*lockAsync_ycbcr)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + struct android_ycbcr *ycbcr, int fenceFd); + + /* reserved for future use */ + void* reserved_proc[3]; +} gralloc_module_t; + +/*****************************************************************************/ + +/** + * Every device data structure must begin with hw_device_t + * followed by module specific public methods and attributes. + */ + +typedef struct alloc_device_t { + struct hw_device_t common; + + /* + * (*alloc)() Allocates a buffer in graphic memory with the requested + * parameters and returns a buffer_handle_t and the stride in pixels to + * allow the implementation to satisfy hardware constraints on the width + * of a pixmap (eg: it may have to be multiple of 8 pixels). + * The CALLER TAKES OWNERSHIP of the buffer_handle_t. + * + * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be + * 0, since the actual strides are available from the android_ycbcr + * structure. + * + * Returns 0 on success or -errno on error. + */ + + int (*alloc)(struct alloc_device_t* dev, + int w, int h, int format, int usage, + buffer_handle_t* handle, int* stride); + + /* + * (*free)() Frees a previously allocated buffer. + * Behavior is undefined if the buffer is still mapped in any process, + * but shall not result in termination of the program or security breaches + * (allowing a process to get access to another process' buffers). + * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes + * invalid after the call. + * + * Returns 0 on success or -errno on error. + */ + int (*free)(struct alloc_device_t* dev, + buffer_handle_t handle); + + /* This hook is OPTIONAL. + * + * If non NULL it will be caused by SurfaceFlinger on dumpsys + */ + void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len); + + void* reserved_proc[7]; +} alloc_device_t; + + +/** convenience API for opening and closing a supported device */ + +static inline int gralloc_open(const struct hw_module_t* module, + struct alloc_device_t** device) { + return module->methods->open(module, +#ifdef __cplusplus + GRALLOC_HARDWARE_GPU0, reinterpret_cast(device)); +#else + GRALLOC_HARDWARE_GPU0, TO_HW_DEVICE_T_OPEN(device)); +#endif +} + +static inline int gralloc_close(struct alloc_device_t* device) { + return device->common.close(&device->common); +} + +/** + * map_usage_to_memtrack should be called after allocating a gralloc buffer. + * + * @param usage - it is the flag used when alloc function is called. + * + * This function maps the gralloc usage flags to appropriate memtrack bucket. + * GrallocHAL implementers and users should make an additional ION_IOCTL_TAG + * call using the memtrack tag returned by this function. This will help the + * in-kernel memtack to categorize the memory allocated by different processes + * according to their usage. + * + */ +static inline const char* map_usage_to_memtrack(uint32_t usage) { + usage &= GRALLOC_USAGE_ALLOC_MASK; + + if ((usage & GRALLOC_USAGE_HW_CAMERA_WRITE) != 0) { + return "camera"; + } else if ((usage & GRALLOC_USAGE_HW_VIDEO_ENCODER) != 0 || + (usage & GRALLOC_USAGE_EXTERNAL_DISP) != 0) { + return "video"; + } else if ((usage & GRALLOC_USAGE_HW_RENDER) != 0 || + (usage & GRALLOC_USAGE_HW_TEXTURE) != 0) { + return "gl"; + } else if ((usage & GRALLOC_USAGE_HW_CAMERA_READ) != 0) { + return "camera"; + } else if ((usage & GRALLOC_USAGE_SW_READ_MASK) != 0 || + (usage & GRALLOC_USAGE_SW_WRITE_MASK) != 0) { + return "cpu"; + } + return "graphics"; +} + +__END_DECLS + +#endif // ANDROID_GRALLOC_INTERFACE_H -- 2.20.1