From 9ab330bf4dfd677a19d03359af9bc0e168a2c4b2 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 11 May 2016 17:36:44 +0300 Subject: [PATCH] usb: dwc3: omap: Don't set POWERPRESENT TRM [1] recommends that POWERPRESENT bit must not be set and left at it's default value of 0. [1] OMAP542x TRM - http://www.ti.com/lit/pdf/swpu249 Section 23.11.4.5.1 Mailbox VBUS/ID Management "Because PIPE powerpresent has a different meaning in host and in device mode, and because of the redundancy with the UTMI signals, the controller ORes together the appropriate PIPE and UTMI inputs to create its internal VBUS status. For that reason, it is recommended to leave field USBOTGSS_UTMI_OTG_STATUS[9] POWERPRESENT at its default value (=0), and only to fill in the USB2 VBUS status fields in the same register." Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-omap.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index bde69fc3fe77..046bb379120e 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -234,8 +234,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID | USBOTGSS_UTMI_OTG_CTRL_SESSEND); - val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -244,8 +243,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND; val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT; + | USBOTGSS_UTMI_OTG_CTRL_SESSVALID; dwc3_omap_write_utmi_ctrl(omap, val); break; @@ -256,8 +254,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, case OMAP_DWC3_VBUS_OFF: val = dwc3_omap_read_utmi_ctrl(omap); val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID - | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID - | USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT); + | USBOTGSS_UTMI_OTG_CTRL_VBUSVALID); val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND | USBOTGSS_UTMI_OTG_CTRL_IDDIG; dwc3_omap_write_utmi_ctrl(omap, val); -- 2.20.1