From 99db6000cf6bf662cf48c63c2fa3df7d99e0da69 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 16:04:53 +0200 Subject: [PATCH] Staging: rt3070: remove dead RALINK_ATE code Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- .../staging/rt3070/common/2870_rtmp_init.c | 19 +- drivers/staging/rt3070/common/action.c | 5 - drivers/staging/rt3070/common/ba_action.c | 6 - drivers/staging/rt3070/common/cmm_sync.c | 6 - drivers/staging/rt3070/common/mlme.c | 83 - drivers/staging/rt3070/common/rtmp_init.c | 43 - drivers/staging/rt3070/common/rtusb_bulk.c | 23 - drivers/staging/rt3070/common/rtusb_io.c | 49 - drivers/staging/rt3070/oid.h | 9 - drivers/staging/rt3070/rt2870.h | 4 - drivers/staging/rt3070/rt_ate.c | 6418 ----------------- drivers/staging/rt3070/rt_ate.h | 262 - drivers/staging/rt3070/rt_config.h | 4 - drivers/staging/rt3070/rt_main_dev.c | 9 - drivers/staging/rt3070/rtmp.h | 102 - drivers/staging/rt3070/rtmp_def.h | 18 - drivers/staging/rt3070/sta/connect.c | 26 - drivers/staging/rt3070/sta/rtmp_data.c | 24 - drivers/staging/rt3070/sta/sync.c | 16 - drivers/staging/rt3070/sta_ioctl.c | 165 - 20 files changed, 1 insertion(+), 7290 deletions(-) delete mode 100644 drivers/staging/rt3070/rt_ate.c delete mode 100644 drivers/staging/rt3070/rt_ate.h diff --git a/drivers/staging/rt3070/common/2870_rtmp_init.c b/drivers/staging/rt3070/common/2870_rtmp_init.c index 953ef541def2..9795638f33cf 100644 --- a/drivers/staging/rt3070/common/2870_rtmp_init.c +++ b/drivers/staging/rt3070/common/2870_rtmp_init.c @@ -503,10 +503,6 @@ NDIS_STATUS RTMPAllocTxRxRingMemory( NdisAllocateSpinLock(&pAd->TxContextQueueLock[num]); } -#ifdef RALINK_ATE - NdisAllocateSpinLock(&pAd->GenericLock); -#endif // RALINK_ATE // - // NdisAllocateSpinLock(&pAd->MemLock); // Not used in RT28XX // NdisAllocateSpinLock(&pAd->MacTabLock); // init it in UserCfgInit() @@ -672,9 +668,7 @@ VOID RTMPFreeTxRxRingMemory( NdisFreeSpinLock(&pAd->MLMEBulkOutLock); NdisFreeSpinLock(&pAd->CmdQLock); -#ifdef RALINK_ATE - NdisFreeSpinLock(&pAd->GenericLock); -#endif // RALINK_ATE // + // Clear all pending bulk-out request flags. RTUSB_CLEAR_BULK_FLAG(pAd, 0xffffffff); @@ -1182,17 +1176,6 @@ static void rx_done_tasklet(unsigned long data) ASSERT((pRxContext->InUse == pRxContext->IRPPending)); -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - // If the driver is in ATE mode and Rx frame is set into here. - if (pAd->ContinBulkIn == TRUE) - { - RTUSBBulkReceive(pAd); - } - } - else -#endif // RALINK_ATE // RTUSBBulkReceive(pAd); return; diff --git a/drivers/staging/rt3070/common/action.c b/drivers/staging/rt3070/common/action.c index b8ae53633661..1597d7aa72de 100644 --- a/drivers/staging/rt3070/common/action.c +++ b/drivers/staging/rt3070/common/action.c @@ -881,11 +881,6 @@ VOID ORIBATimerTimeout( // USHORT Sequence; UCHAR TID; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - total = pAd->MacTab.Size * NUM_OF_TID; for (i = 1; ((i 0)) ; i++) diff --git a/drivers/staging/rt3070/common/ba_action.c b/drivers/staging/rt3070/common/ba_action.c index 2ad68cb73858..b312495b8d43 100644 --- a/drivers/staging/rt3070/common/ba_action.c +++ b/drivers/staging/rt3070/common/ba_action.c @@ -1081,12 +1081,6 @@ VOID BAOriSessionSetupTimeout( } #endif // CONFIG_STA_SUPPORT // -#ifdef RALINK_ATE - // Nothing to do in ATE mode. - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - pEntry = &pAd->MacTab.Content[pBAEntry->Wcid]; if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY)) diff --git a/drivers/staging/rt3070/common/cmm_sync.c b/drivers/staging/rt3070/common/cmm_sync.c index 2be7c77a384e..60a8f021d83b 100644 --- a/drivers/staging/rt3070/common/cmm_sync.c +++ b/drivers/staging/rt3070/common/cmm_sync.c @@ -397,12 +397,6 @@ VOID ScanNextChannel( } #endif // CONFIG_STA_SUPPORT // -#ifdef RALINK_ATE - // Nothing to do in ATE mode. - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - if (pAd->MlmeAux.Channel == 0) { if ((pAd->CommonCfg.BBPCurrentBW == BW_40) diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c index 0189bab013cf..f5c386b500a7 100644 --- a/drivers/staging/rt3070/common/mlme.c +++ b/drivers/staging/rt3070/common/mlme.c @@ -590,14 +590,6 @@ VOID MlmeHandler( break; } -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n")); - break; - } -#endif // RALINK_ATE // - //From message type, determine which state machine I should drive if (MlmeDequeue(&pAd->Mlme.Queue, &Elem)) { @@ -844,18 +836,6 @@ VOID MlmePeriodicExec( RT28XX_MLME_PRE_SANITY_CHECK(pAd); -#ifdef RALINK_ATE - /* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */ - if (ATE_ON(pAd)) - { - if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1)) - { - pAd->Mlme.PeriodicRound ++; - return; - } - } -#endif // RALINK_ATE // - #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { @@ -913,30 +893,6 @@ VOID MlmePeriodicExec( { pAd->Mlme.OneSecPeriodicRound ++; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - /* request from Baron : move this routine from later to here */ - /* for showing Rx error count in ATE RXFRAME */ - NICUpdateRawCounters(pAd); - if (pAd->ate.bRxFer == 1) - { - pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec; - ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt); - pAd->ate.RxCntPerSec = 0; - - if (pAd->ate.RxAntennaSel == 0) - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n", - pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2); - else - ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0); - } - MlmeResetRalinkCounters(pAd); - return; - } -#endif // RALINK_ATE // - - if (rx_Total) { @@ -1052,17 +1008,6 @@ VOID STAMlmePeriodicExec( ULONG TxTotalCnt; int i; -// -// We return here in ATE mode, because the statistics -// that ATE needs are not collected via this routine. -// -#ifdef RALINK_ATE - // It is supposed that we will never reach here in ATE mode. - ASSERT(!(ATE_ON(pAd))); - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - #ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) #endif // WPA_SUPPLICANT_SUPPORT // @@ -2024,13 +1969,6 @@ VOID MlmeDynamicTxRateSwitching( ULONG TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0; MAC_TABLE_ENTRY *pEntry; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - // // walk through MAC table, see if need to change AP's TX rate toward each entry // @@ -4870,12 +4808,6 @@ BOOLEAN MlmeEnqueueForRecv( INT MsgType; MLME_QUEUE *Queue = (MLME_QUEUE *)&pAd->Mlme.Queue; -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if(ATE_ON(pAd)) - return FALSE; -#endif // RALINK_ATE // - // Do nothing if the driver is starting halt state. // This might happen when timer already been fired before cancel timer with mlmehalt if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) @@ -5550,11 +5482,6 @@ VOID AsicUpdateProtect( UCHAR i; UINT32 MacReg = 0; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - #ifdef DOT11_N_SUPPORT if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8)) { @@ -8411,11 +8338,6 @@ VOID AsicEvaluateRxAnt( { UCHAR BBPR3 = 0; -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF | @@ -8530,11 +8452,6 @@ VOID AsicRxAntEvalTimeout( CHAR larger = -127, rssi0, rssi1, rssi2; #endif // CONFIG_STA_SUPPORT // -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF | diff --git a/drivers/staging/rt3070/common/rtmp_init.c b/drivers/staging/rt3070/common/rtmp_init.c index 298fce8aa712..2fb802f92192 100644 --- a/drivers/staging/rt3070/common/rtmp_init.c +++ b/drivers/staging/rt3070/common/rtmp_init.c @@ -2478,12 +2478,6 @@ VOID NICUpdateFifoStaCounters( CHAR reTry; UCHAR succMCS; -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - do { RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word); @@ -3512,36 +3506,6 @@ VOID UserCfgInit( //RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE); //RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV); -#ifdef RALINK_ATE - NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO)); - pAd->ate.Mode = ATE_STOP; - pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */ - pAd->ate.TxLength = 1024; - pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns - pAd->ate.TxWI.PHYMODE = MODE_CCK; - pAd->ate.TxWI.MCS = 3; - pAd->ate.TxWI.BW = BW_20; - pAd->ate.Channel = 1; - pAd->ate.QID = QID_AC_BE; - pAd->ate.Addr1[0] = 0x00; - pAd->ate.Addr1[1] = 0x11; - pAd->ate.Addr1[2] = 0x22; - pAd->ate.Addr1[3] = 0xAA; - pAd->ate.Addr1[4] = 0xBB; - pAd->ate.Addr1[5] = 0xCC; - NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - pAd->ate.bRxFer = 0; - pAd->ate.bQATxStart = FALSE; - pAd->ate.bQARxStart = FALSE; -#ifdef RALINK_28xx_QA - //pAd->ate.Repeat = 0; - pAd->ate.TxStatus = 0; - pAd->ate.AtePid = 0; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - - pAd->CommonCfg.bWiFiTest = FALSE; @@ -3820,13 +3784,6 @@ VOID RTMPSetLED( UCHAR HighByte = 0; UCHAR LowByte; -// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware. -// So LED mode is not supported when ATE is running. -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - LowByte = pAd->LedCntl.field.LedMode&0x7f; switch (Status) { diff --git a/drivers/staging/rt3070/common/rtusb_bulk.c b/drivers/staging/rt3070/common/rtusb_bulk.c index be736342c95d..f0279af1f1ed 100644 --- a/drivers/staging/rt3070/common/rtusb_bulk.c +++ b/drivers/staging/rt3070/common/rtusb_bulk.c @@ -1039,9 +1039,6 @@ VOID RTUSBKickBulkOut( { // BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged. if (!RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX) -#ifdef RALINK_ATE - && !(ATE_ON(pAd)) -#endif // RALINK_ATE // ) { // 2. PS-Poll frame is next @@ -1119,18 +1116,6 @@ VOID RTUSBKickBulkOut( } } -#ifdef RALINK_ATE - /* If the mode is in ATE mode. */ - else if((ATE_ON(pAd)) && - !RTMP_TEST_FLAG(pAd ,fRTMP_ADAPTER_NEED_STOP_TX))// PETER : watch out ! - { - if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE)) - { - ATE_RTUSBBulkOutDataPacket(pAd, 0); - } - } -#endif // RALINK_ATE // - } /* @@ -1295,14 +1280,6 @@ VOID RTUSBCancelPendingBulkOutIRP( RTMPusecDelay(200); } -#ifdef RALINK_ATE - pHTTXContext->bCopySavePad = 0; - pHTTXContext->CurWritePosition = 0; - pHTTXContext->CurWriteRealPos = 0; - pHTTXContext->bCurWriting = FALSE; - pHTTXContext->NextBulkOutPosition = 0; - pHTTXContext->ENextBulkOutPosition = 0; -#endif // RALINK_ATE // pAd->BulkOutPending[Idx] = FALSE; } diff --git a/drivers/staging/rt3070/common/rtusb_io.c b/drivers/staging/rt3070/common/rtusb_io.c index a6a52e3445f9..01153b7d59ef 100644 --- a/drivers/staging/rt3070/common/rtusb_io.c +++ b/drivers/staging/rt3070/common/rtusb_io.c @@ -1217,13 +1217,6 @@ VOID CMDHandler( #ifdef CONFIG_STA_SUPPORT UINT32 data; #endif // CONFIG_STA_SUPPORT // -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // #ifdef CONFIG_STA_SUPPORT @@ -1284,9 +1277,6 @@ VOID CMDHandler( PHT_TX_CONTEXT pHTTXContext; // RTMP_TX_RING *pTxRing; unsigned long IrqFlags; -#ifdef RALINK_ATE - PTX_CONTEXT pNullContext = &(pAd->NullContext); -#endif // RALINK_ATE // DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid)); // All transfers must be aborted or cancelled before attempting to reset the pipe. //RTUSBCancelPendingBulkOutIRP(pAd); @@ -1349,32 +1339,6 @@ VOID CMDHandler( //NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags); /*-----------------------------------------------------------------------------------------------*/ -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - pNullContext->IRPPending = TRUE; - // - // If driver is still in ATE TXFRAME mode, - // keep on transmitting ATE frames. - // - DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->ate.Mode == %d\npAd->ContinBulkOut == %d\npAd->BulkOutRemained == %d\n", pAd->ate.Mode, pAd->ContinBulkOut, atomic_read(&pAd->BulkOutRemained))); - if((pAd->ate.Mode == ATE_TXFRAME) && ((pAd->ContinBulkOut == TRUE) || (atomic_read(&pAd->BulkOutRemained) > 0))) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("After CMDTHREAD_RESET_BULK_OUT, continue to bulk out frames !\n")); - - // Init Tx context descriptor - RTUSBInitTxDesc(pAd, pNullContext, 0/* pAd->bulkResetPipeid */, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete); - - if((ret = RTUSB_SUBMIT_URB(pNullContext->pUrb))!=0) - { - DBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret)); - } - - pAd->BulkOutReq++; - } - } - else -#endif // RALINK_ATE // /*-----------------------------------------------------------------------------------------------*/ { RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, pHTTXContext->BulkOutSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete); @@ -1487,19 +1451,6 @@ VOID CMDHandler( { UINT32 MACValue; /*-----------------------------------------------------------------------------------------------*/ -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) - { - DBGPRINT_RAW(RT_DEBUG_ERROR, ("ATE : BulkIn IRP Pending!!!\n")); - ATE_RTUSBCancelPendingBulkInIRP(pAd); - RTMPusecDelay(100000); - pAd->PendingRx = 0; - } - } - else -#endif // RALINK_ATE // /*-----------------------------------------------------------------------------------------------*/ { //while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) diff --git a/drivers/staging/rt3070/oid.h b/drivers/staging/rt3070/oid.h index c999d6548946..63437a929dd9 100644 --- a/drivers/staging/rt3070/oid.h +++ b/drivers/staging/rt3070/oid.h @@ -84,9 +84,6 @@ #define OID_GEN_MACHINE_NAME 0x0001021A -#ifdef RALINK_ATE -#define RT_QUERY_ATE_TXDONE_COUNT 0x0401 -#endif // RALINK_ATE // #define RT_QUERY_SIGNAL_CONTEXT 0x0402 #define RT_SET_IAPP_PID 0x0404 #define RT_SET_APD_PID 0x0405 @@ -667,12 +664,6 @@ typedef struct _NDIS_802_11_CAPABILITY #define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07) #endif -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA -#define RTPRIV_IOCTL_ATE (SIOCIWFIRSTPRIV + 0x08) -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - #define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09) #define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A) #define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C) diff --git a/drivers/staging/rt3070/rt2870.h b/drivers/staging/rt3070/rt2870.h index 6a7d2f01a613..79030c6066b5 100644 --- a/drivers/staging/rt3070/rt2870.h +++ b/drivers/staging/rt3070/rt2870.h @@ -69,10 +69,6 @@ #define fRTUSB_BULK_OUT_DATA_FRAG_3 0x00000100 #define fRTUSB_BULK_OUT_DATA_FRAG_4 0x00000200 -#ifdef RALINK_ATE -#define fRTUSB_BULK_OUT_DATA_ATE 0x00100000 -#endif // RALINK_ATE // - #define RT2870_USB_DEVICES \ { \ {USB_DEVICE(0x148F,0x2770)}, /* Ralink */ \ diff --git a/drivers/staging/rt3070/rt_ate.c b/drivers/staging/rt3070/rt_ate.c deleted file mode 100644 index b636015c62d1..000000000000 --- a/drivers/staging/rt3070/rt_ate.c +++ /dev/null @@ -1,6418 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - */ - -#include "rt_config.h" - -#define ATE_BBP_REG_NUM 168 -UCHAR restore_BBP[ATE_BBP_REG_NUM]={0}; - -#ifdef RALINK_ATE -UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00}; // 802.11 MAC Header, Type:Data, Length:24bytes -extern RTMP_RF_REGS RF2850RegTable[]; -extern UCHAR NUM_OF_2850_CHNL; - -#ifdef RT2870 -extern UCHAR EpToQueue[]; -extern VOID RTUSBRejectPendingPackets( IN PRTMP_ADAPTER pAd); -#endif // RT2870 // - -#ifdef RT30xx -//2008/07/10:KH adds to support 3070 ATE<-- -extern FREQUENCY_ITEM FreqItems3020[]; -extern UCHAR NUM_OF_3020_CHNL; -//2008/07/10:KH adds to support 3070 ATE--> -#endif // RT30xx // - -static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */ -static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */ -static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */ - -static INT TxDmaBusy( - IN PRTMP_ADAPTER pAd); - -static INT RxDmaBusy( - IN PRTMP_ADAPTER pAd); - -static VOID RtmpDmaEnable( - IN PRTMP_ADAPTER pAd, - IN INT Enable); - -static VOID BbpSoftReset( - IN PRTMP_ADAPTER pAd); - -static VOID RtmpRfIoWrite( - IN PRTMP_ADAPTER pAd); - -static INT ATESetUpFrame( - IN PRTMP_ADAPTER pAd, - IN UINT32 TxIdx); - -static INT ATETxPwrHandler( - IN PRTMP_ADAPTER pAd, - IN char index); - -static INT ATECmdHandler( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -static int CheckMCSValid( - IN UCHAR Mode, - IN UCHAR Mcs); - - -#ifdef RT2870 -static VOID ATEWriteTxInfo( - IN PRTMP_ADAPTER pAd, - IN PTXINFO_STRUC pTxInfo, - IN USHORT USBDMApktLen, - IN BOOLEAN bWiv, - IN UCHAR QueueSel, - IN UCHAR NextValid, - IN UCHAR TxBurst); - -static VOID ATEWriteTxWI( - IN PRTMP_ADAPTER pAd, - IN PTXWI_STRUC pTxWI, - IN BOOLEAN FRAG, - IN BOOLEAN InsTimestamp, - IN BOOLEAN AMPDU, - IN BOOLEAN Ack, - IN BOOLEAN NSeq, // HW new a sequence. - IN UCHAR BASize, - IN UCHAR WCID, - IN ULONG Length, - IN UCHAR PID, - IN UCHAR MIMOps, - IN UCHAR Txopmode, - IN BOOLEAN CfAck, - IN HTTRANSMIT_SETTING Transmit); - -#endif // RT2870 // - -static VOID SetJapanFilter( - IN PRTMP_ADAPTER pAd); - -/*=========================end of prototype=========================*/ - - -#ifdef RT2870 -static INT TxDmaBusy( - IN PRTMP_ADAPTER pAd) -{ - INT result; - USB_DMA_CFG_STRUC UsbCfg; - - RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA - if (UsbCfg.field.TxBusy) - result = 1; - else - result = 0; - - return result; -} - -static INT RxDmaBusy( - IN PRTMP_ADAPTER pAd) -{ - INT result; - USB_DMA_CFG_STRUC UsbCfg; - - RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA - if (UsbCfg.field.RxBusy) - result = 1; - else - result = 0; - - return result; -} - -static VOID RtmpDmaEnable( - IN PRTMP_ADAPTER pAd, - IN INT Enable) -{ - BOOLEAN value; - ULONG WaitCnt; - USB_DMA_CFG_STRUC UsbCfg; - - value = Enable > 0 ? 1 : 0; - - // check DMA is in busy mode. - WaitCnt = 0; - while (TxDmaBusy(pAd) || RxDmaBusy(pAd)) - { - RTMPusecDelay(10); - if (WaitCnt++ > 100) - break; - } - - //Why not to clear USB DMA TX path first ??? - RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA - UsbCfg.field.TxBulkEn = value; - UsbCfg.field.RxBulkEn = value; - RTMP_IO_WRITE32(pAd, USB_DMA_CFG, UsbCfg.word); // abort all TX rings - RTMPusecDelay(5000); - - return; -} -#endif // RT2870 // - -static VOID BbpSoftReset( - IN PRTMP_ADAPTER pAd) -{ - UCHAR BbpData = 0; - - // Soft reset, set BBP R21 bit0=1->0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData); - BbpData |= 0x00000001; //set bit0=1 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData); - - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData); - BbpData &= ~(0x00000001); //set bit0=0 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData); - - return; -} - -static VOID RtmpRfIoWrite( - IN PRTMP_ADAPTER pAd) -{ - // Set RF value 1's set R3[bit2] = [0] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04))); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - RTMPusecDelay(200); - - // Set RF value 2's set R3[bit2] = [1] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04)); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - RTMPusecDelay(200); - - // Set RF value 3's set R3[bit2] = [0] - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04))); - RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4); - - return; -} - -static int CheckMCSValid( - UCHAR Mode, - UCHAR Mcs) -{ - int i; - PCHAR pRateTab; - - switch(Mode) - { - case 0: - pRateTab = CCKRateTable; - break; - case 1: - pRateTab = OFDMRateTable; - break; - case 2: - case 3: - pRateTab = HTMIXRateTable; - break; - default: - ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode)); - return -1; - break; - } - - i = 0; - while(pRateTab[i] != -1) - { - if (pRateTab[i] == Mcs) - return 0; - i++; - } - - return -1; -} - -#if 1 -static INT ATETxPwrHandler( - IN PRTMP_ADAPTER pAd, - IN char index) -{ - ULONG R; - CHAR TxPower; - UCHAR Bbp94 = 0; - BOOLEAN bPowerReduce = FALSE; -#ifdef RT30xx - UCHAR RFValue; -#endif // RT30xx // -#ifdef RALINK_28xx_QA - if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE)) - { - /* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power - ** are not synchronized. - */ -/* - pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx; - pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx; -*/ - return 0; - } - else -#endif // RALINK_28xx_QA // - { - TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1; - - if (pAd->ate.Channel <= 14) - { - if (TxPower > 31) - { - // - // R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94 - // - R = 31; - if (TxPower <= 36) - Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31); - } - else if (TxPower < 0) - { - // - // R3, R4 can't less than 0, -1 ~ -6 used by BBP 94 - // - R = 0; - if (TxPower >= -6) - Bbp94 = BBPR94_DEFAULT + TxPower; - } - else - { - // 0 ~ 31 - R = (ULONG) TxPower; - Bbp94 = BBPR94_DEFAULT; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94)); - } - else// 5.5 GHz - { - if (TxPower > 15) - { - // - // R3, R4 can't large than 15 (0x0F) - // - R = 15; - } - else if (TxPower < 0) - { - // - // R3, R4 can't less than 0 - // - // -1 ~ -7 - ASSERT((TxPower >= -7)); - R = (ULONG)(TxPower + 7); - bPowerReduce = TRUE; - } - else - { - // 0 ~ 15 - R = (ULONG) TxPower; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __func__, TxPower, R)); - } -//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time<-- -#ifdef RT30xx - if(IS_RT30xx(pAd)) - { - // Set Tx Power - - RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue); - RFValue = (RFValue & 0xE0) | TxPower; - RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue); - ATEDBGPRINT(RT_DEBUG_TRACE, ("3070 or 2070:%s (TxPower=%d, RFValue=%x)\n", __func__, TxPower, RFValue)); - - } - else -#endif // RT30xx // - { - if (pAd->ate.Channel <= 14) - { - if (index == 0) - { - R = R << 9; // shift TX power control to correct RF(R3) register bit position - R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff); - pAd->LatchRfRegs.R3 = R; - } - else - { - R = R << 6; // shift TX power control to correct RF(R4) register bit position - R |= (pAd->LatchRfRegs.R4 & 0xfffff83f); - pAd->LatchRfRegs.R4 = R; - } - } - else// 5.5GHz - { - if (bPowerReduce == FALSE) - { - if (index == 0) - { - R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position - R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff); - pAd->LatchRfRegs.R3 = R; - } - else - { - R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position - R |= (pAd->LatchRfRegs.R4 & 0xfffff83f); - pAd->LatchRfRegs.R4 = R; - } - } - else - { - if (index == 0) - { - R = (R << 10); // shift TX power control to correct RF(R3) register bit position - R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff); - - /* Clear bit 9 of R3 to reduce 7dB. */ - pAd->LatchRfRegs.R3 = (R & (~(1 << 9))); - } - else - { - R = (R << 7); // shift TX power control to correct RF(R4) register bit position - R |= (pAd->LatchRfRegs.R4 & 0xfffff83f); - - /* Clear bit 6 of R4 to reduce 7dB. */ - pAd->LatchRfRegs.R4 = (R & (~(1 << 6))); - } - } - } - RtmpRfIoWrite(pAd); - } -//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time--> - - return 0; - } -} -#else// 1 // -static INT ATETxPwrHandler( - IN PRTMP_ADAPTER pAd, - IN char index) -{ - ULONG R; - CHAR TxPower; - UCHAR Bbp94 = 0; - -#ifdef RALINK_28xx_QA - if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE)) - { - // TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ? - /* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power - ** are not synchronized. - */ -/* - pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx; - pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx; -*/ - return 0; - } - else -#endif // RALINK_28xx_QA // - { - TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1; - - if (TxPower > 31) - { - // - // R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94 - // - R = 31; - if (TxPower <= 36) - Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31); - } - else if (TxPower < 0) - { - // - // R3, R4 can't less than 0, -1 ~ -6 used by BBP 94 - // - R = 0; - if (TxPower >= -6) - Bbp94 = BBPR94_DEFAULT + TxPower; - } - else - { - // 0 ~ 31 - R = (ULONG) TxPower; - Bbp94 = BBPR94_DEFAULT; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __func__, TxPower, R, Bbp94)); - - if (pAd->ate.Channel <= 14) - { - if (index == 0) - { - R = R << 9; // shift TX power control to correct RF(R3) register bit position - R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff); - pAd->LatchRfRegs.R3 = R; - } - else - { - R = R << 6; // shift TX power control to correct RF(R4) register bit position - R |= (pAd->LatchRfRegs.R4 & 0xfffff83f); - pAd->LatchRfRegs.R4 = R; - } - } - else - { - if (index == 0) - { - R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position - R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff); - pAd->LatchRfRegs.R3 = R; - } - else - { - R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position - R |= (pAd->LatchRfRegs.R4 & 0xfffff83f); - pAd->LatchRfRegs.R4 = R; - } - } - - RtmpRfIoWrite(pAd); - - return 0; - } -} -#endif // 1 // -/* - ========================================================================== - Description: - Set ATE operation mode to - 0. ATESTART = Start ATE Mode - 1. ATESTOP = Stop ATE Mode - 2. TXCONT = Continuous Transmit - 3. TXCARR = Transmit Carrier - 4. TXFRAME = Transmit Frames - 5. RXFRAME = Receive Frames -#ifdef RALINK_28xx_QA - 6. TXSTOP = Stop Any Type of Transmition - 7. RXSTOP = Stop Receiving Frames -#endif // RALINK_28xx_QA // - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -/* */ -/* */ -/*=======================End of RT2860=======================*/ - - -/*======================Start of RT2870======================*/ -/* */ -/* */ - -#ifdef RT2870 -static INT ATECmdHandler( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UINT32 Value; - UCHAR BbpData; - UINT32 MacData; - UINT i=0, atemode; - //NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - //PUCHAR pDest; - UINT32 temp; - ULONG IrqFlags; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n")); - ATEAsicSwitchChannel(pAd); - /* AsicLockChannel() is empty function so far in fact */ - AsicLockChannel(pAd, pAd->ate.Channel); - - RTMPusecDelay(5000); - - // Default value in BBP R22 is 0x0. - BbpData = 0; - - /* Enter ATE mode and set Tx/Rx Idle */ - if (!strcmp(arg, "ATESTART")) - { -#ifdef CONFIG_STA_SUPPORT - BOOLEAN Cancelled; -#endif // CONFIG_STA_SUPPORT // - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n")); - - netif_stop_queue(pAd->net_dev); - - atemode = pAd->ate.Mode; - pAd->ate.Mode = ATE_START; -// pAd->ate.TxDoneCount = pAd->ate.TxCount; - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Disable auto responder - RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp); - temp = temp & 0xFFFFFFFE; - RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp); - - // read MAC_SYS_CTRL and backup MAC_SYS_CTRL value. - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - // clean bit4 to stop continuous Tx production test. - MacData &= 0xFFFFFFEF; - // Stop continuous TX production test. - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);//disable or cancel pending irp first ??? - - if (atemode & ATE_TXCARR -#ifdef RT30xx - || atemode & ATE_TXCONT -#endif // RT30xx // -) - { -#ifdef RT30xx - //Hardware Reset BBP - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp); - temp = temp |0x00000002; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp); - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp); - temp = temp & ~(0x00000002); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp); - //Restore All BBP Value - for(i=0;iMlmeAux.AssocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); - RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); -#endif // CONFIG_STA_SUPPORT // - - //RTUSBCleanUpMLMEWaitQueue(pAd); /* not used in RT28xx */ - RTUSBCleanUpMLMEBulkOutQueue(pAd); - - // Sometimes kernel will hang on, so we avoid calling MlmeSuspend(). -// MlmeSuspend(pAd, TRUE); - //RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled); - - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); - - // Disable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Make sure there are no pending bulk in/out IRPs before we go on. -/*=========================================================================*/ - /* pAd->PendingRx is not of type atomic_t anymore in 28xx */ -// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish - while ((pAd->PendingRx > 0)) //pAd->BulkFlags != 0 wait bulk out finish - { -#if 1 - ATE_RTUSBCancelPendingBulkInIRP(pAd); -#else - NdisInterlockedDecrement(&pAd->PendingRx); -#endif - /* delay 0.5 seconds */ - RTMPusecDelay(500000); - pAd->PendingRx = 0; - } - /* peter : why don't we have to get BulkOutLock first ? */ - while (((pAd->BulkOutPending[0] == TRUE) || - (pAd->BulkOutPending[1] == TRUE) || - (pAd->BulkOutPending[2] == TRUE) || - (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish - { - do - { - /* pAd->BulkOutPending[y] will be set to FALSE in RTUSBCancelPendingBulkOutIRP(pAd) */ - RTUSBCancelPendingBulkOutIRP(pAd); - } while (FALSE); - - /* we have enough time delay in RTUSBCancelPendingBulkOutIRP(pAd) - ** so this is not necessary - */ -// RTMPusecDelay(500000); - } - - /* pAd->PendingRx is not of type atomic_t anymore in 28xx */ -// ASSERT(atomic_read(&pAd->PendingRx) == 0); - ASSERT(pAd->PendingRx == 0); -/*=========================================================================*/ - - // reset Rx statistics. - pAd->ate.LastSNR0 = 0; - pAd->ate.LastSNR1 = 0; - pAd->ate.LastRssi0 = 0; - pAd->ate.LastRssi1 = 0; - pAd->ate.LastRssi2 = 0; - pAd->ate.AvgRssi0 = 0; - pAd->ate.AvgRssi1 = 0; - pAd->ate.AvgRssi2 = 0; - pAd->ate.AvgRssi0X8 = 0; - pAd->ate.AvgRssi1X8 = 0; - pAd->ate.AvgRssi2X8 = 0; - pAd->ate.NumOfAvgRssiSample = 0; - -#ifdef RALINK_28xx_QA - // Tx frame - pAd->ate.bQATxStart = FALSE; - pAd->ate.bQARxStart = FALSE; - pAd->ate.seq = 0; - - // counters - pAd->ate.U2M = 0; - pAd->ate.OtherData = 0; - pAd->ate.Beacon = 0; - pAd->ate.OtherCount = 0; - pAd->ate.TxAc0 = 0; - pAd->ate.TxAc1 = 0; - pAd->ate.TxAc2 = 0; - pAd->ate.TxAc3 = 0; - pAd->ate.TxHCCA = 0; - pAd->ate.TxMgmt = 0; - pAd->ate.RSSI0 = 0; - pAd->ate.RSSI1 = 0; - pAd->ate.RSSI2 = 0; - pAd->ate.SNR0 = 0; - pAd->ate.SNR1 = 0; - - // control - pAd->ate.TxDoneCount = 0; - pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running -#endif // RALINK_28xx_QA // - - // Soft reset BBP. - BbpSoftReset(pAd); - - -#ifdef CONFIG_STA_SUPPORT - AsicDisableSync(pAd); - - /* - ** If we skip "LinkDown()", we should disable protection - ** to prevent from sending out RTS or CTS-to-self. - */ - ATEDisableAsicProtect(pAd); - RTMPStationStop(pAd); -#endif // CONFIG_STA_SUPPORT // - - // Default value in BBP R22 is 0x0. - BbpData = 0; - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - - // Clean bit4 to stop continuous Tx production test. - MacData &= 0xFFFFFFEF; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - //Clean ATE Bulk in/out counter and continue setup - InterlockedExchange(&pAd->BulkOutRemained, 0); - - /* NdisAcquireSpinLock()/NdisReleaseSpinLock() need only one argument in RT28xx */ - NdisAcquireSpinLock(&pAd->GenericLock); - pAd->ContinBulkOut = FALSE; - pAd->ContinBulkIn = FALSE; - NdisReleaseSpinLock(&pAd->GenericLock); - - RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - } - else if (!strcmp(arg, "ATESTOP")) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE : ATESTOP ===>\n")); - - // Default value in BBP R22 is 0x0. - BbpData = 0; - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);//0820 - // Clean bit4 to stop continuous Tx production test. - MacData &= 0xFFFFFFEF; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back. - - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - /* - ** Abort Tx, RX DMA. - ** Q : How to do the following I/O if Tx, Rx DMA is aborted ? - ** Ans : Bulk endpoints are aborted, while the control endpoint is not. - */ - RtmpDmaEnable(pAd, 0); - - // Disable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - /* Make sure there are no pending bulk in/out IRPs before we go on. */ -/*=========================================================================*/ -// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish - while (pAd->PendingRx > 0) - { -#if 1 - ATE_RTUSBCancelPendingBulkInIRP(pAd); -#else -// NdisInterlockedDecrement(&pAd->PendingRx); - pAd->PendingRx--; -#endif - RTMPusecDelay(500000); - } - - while (((pAd->BulkOutPending[0] == TRUE) || - (pAd->BulkOutPending[1] == TRUE) || - (pAd->BulkOutPending[2] == TRUE) || - (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish - { - do - { - RTUSBCancelPendingBulkOutIRP(pAd); - } while (FALSE); - - RTMPusecDelay(500000); - } - -// ASSERT(atomic_read(&pAd->PendingRx) == 0); - ASSERT(pAd->PendingRx == 0); -/*=========================================================================*/ -/* Reset Rx RING */ -/*=========================================================================*/ -// InterlockedExchange(&pAd->PendingRx, 0); - pAd->PendingRx = 0; - pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index - pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer - pAd->NextRxBulkInPosition = 0; - for (i = 0; i < (RX_RING_SIZE); i++) - { - PRX_CONTEXT pRxContext = &(pAd->RxContext[i]); - NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE); - /* peter : why don't we have to get BulkInLock first ? */ - pRxContext->pAd = pAd; - pRxContext->pIrp = NULL; - /* peter debug ++ */ - pRxContext->BulkInOffset = 0; - pRxContext->bRxHandling = FALSE; - /* peter debug -- */ - pRxContext->InUse = FALSE; - pRxContext->IRPPending = FALSE; - pRxContext->Readable = FALSE; -// pRxContext->ReorderInUse = FALSE; -// pRxContext->ReadPosOffset = 0; - } - -/*=========================================================================*/ -/* Reset Tx RING */ -/*=========================================================================*/ - do - { - RTUSBCancelPendingBulkOutIRP(pAd); - } while (FALSE); - -/*=========================================================================*/ - // Enable auto responder. - RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp); - temp = temp | (0x01); - RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp); - -/*================================================*/ - AsicEnableBssSync(pAd); - - /* Soft reset BBP.*/ - /* In 2870 chipset, ATE_BBP_IO_READ8_BY_REG_ID() == RTMP_BBP_IO_READ8_BY_REG_ID() */ - /* Both rt2870ap and rt2870sta use BbpSoftReset(pAd) to do BBP soft reset */ - BbpSoftReset(pAd); -/*================================================*/ - { -#ifdef CONFIG_STA_SUPPORT - // Set all state machines back IDLE - pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; - pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; - pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE; - pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE; - pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE; - pAd->Mlme.ActMachine.CurrState = ACT_IDLE; -#endif // CONFIG_STA_SUPPORT // - - // - // ===> refer to MlmeRestartStateMachine(). - // When we entered ATE_START mode, PeriodicTimer was not cancelled. - // So we don't have to set it here. - // - //RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV); - - ASSERT(pAd->CommonCfg.Channel != 0); - - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - - -#ifdef CONFIG_STA_SUPPORT - RTMPStationStart(pAd); -#endif // CONFIG_STA_SUPPORT // - } -// -// These two steps have been done when entering ATE_STOP mode. -// - // Clean ATE Bulk in/out counter and continue setup. - InterlockedExchange(&pAd->BulkOutRemained, 0); - NdisAcquireSpinLock(&pAd->GenericLock); - pAd->ContinBulkOut = FALSE; - pAd->ContinBulkIn = FALSE; - NdisReleaseSpinLock(&pAd->GenericLock); - - /* Wait 50ms to prevent next URB to bulkout during HW reset. */ - /* todo : remove this if not necessary */ - NdisMSleep(50000); - - pAd->ate.Mode = ATE_STOP; - - // Enable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - -/*=========================================================================*/ - /* restore RX_FILTR_CFG */ -#ifdef CONFIG_STA_SUPPORT - /* restore RX_FILTR_CFG in order that QA maybe set it to 0x3 */ - RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); -#endif // CONFIG_STA_SUPPORT // -/*=========================================================================*/ - - // Enable Tx, RX DMA. - RtmpDmaEnable(pAd, 1); - - // Enable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Wait 10ms to wait all of the bulk-in URBs to complete. - /* todo : remove this if not necessary */ - NdisMSleep(10000); - - // Everything is ready to start normal Tx/Rx. - RTUSBBulkReceive(pAd); - netif_start_queue(pAd->net_dev); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATE : ATESTOP \n")); - } - else if (!strcmp(arg, "TXCARR")) // Tx Carrier - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n")); - pAd->ate.Mode |= ATE_TXCARR; - -#ifdef RT30xx - for(i=0;iate.bQATxStart == FALSE) - { - // Soft reset BBP. - BbpSoftReset(pAd); - - // Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0] - BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - - // set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1 - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value = Value | 0x00000010; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - } - } - else if (!strcmp(arg, "TXCONT")) // Tx Continue - { - if (pAd->ate.bQATxStart == TRUE) - { - /* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test) - and bit2(MAC TX enable) back to zero. */ - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - MacData &= 0xFFFFFFEB; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - - // set BBP R22 bit7=0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData &= 0xFFFFFF7F; //set bit7=0 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - } - - /* for TxCont mode. - ** Step 1: Send 50 packets first then wait for a moment. - ** Step 2: Send more 50 packet then start continue mode. - */ - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n")); - -#ifdef RT30xx - for(i=0;iate.Mode |= ATE_TXCONT; - pAd->ate.TxCount = 50; - pAd->ate.TxDoneCount = 0; - - // Soft reset BBP. - BbpSoftReset(pAd); - - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); - - - /* Only needed if we have to send some normal frames. */ - SetJapanFilter(pAd); - - // Setup frame format. - ATESetUpFrame(pAd, 0); - - // Enable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Start Tx, RX DMA. - RtmpDmaEnable(pAd, 1); - - InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount); - -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - pAd->ate.TxStatus = 1; - //pAd->ate.Repeat = 0; - } -#endif // RALINK_28xx_QA // - - NdisAcquireSpinLock(&pAd->GenericLock);//0820 - pAd->ContinBulkOut = FALSE; - NdisReleaseSpinLock(&pAd->GenericLock); - - RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - - // Kick bulk out - RTUSBKickBulkOut(pAd); - - /* To make sure all the 50 frames have been bulk out before executing step 2 */ - while (atomic_read(&pAd->BulkOutRemained) > 0) - { - RTMPusecDelay(5000); - } - - // Step 2: send more 50 packets then start continue mode. - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); - - // Cont. TX set BBP R22 bit7=1 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData |= 0x00000080; //set bit7=1 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - - pAd->ate.TxCount = 50; - pAd->ate.TxDoneCount = 0; - - SetJapanFilter(pAd); - - // Setup frame format. - ATESetUpFrame(pAd, 0); - - // Enable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - - // Start Tx, RX DMA. - RtmpDmaEnable(pAd, 1); - - InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount); - -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - pAd->ate.TxStatus = 1; - //pAd->ate.Repeat = 0; - } -#endif // RALINK_28xx_QA // - - NdisAcquireSpinLock(&pAd->GenericLock);//0820 - pAd->ContinBulkOut = FALSE; - NdisReleaseSpinLock(&pAd->GenericLock); - - RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - // Kick bulk out - RTUSBKickBulkOut(pAd); - -#if 1 - RTMPusecDelay(500); -#else - while (atomic_read(&pAd->BulkOutRemained) > 0) - { - RTMPusecDelay(5000); - } -#endif // 1 // - - // Set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1. - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - MacData |= 0x00000010; - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - } - else if (!strcmp(arg, "TXFRAME")) // Tx Frames - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=0x%08x)\n", pAd->ate.TxCount)); - pAd->ate.Mode |= ATE_TXFRAME; - - // Soft reset BBP. - BbpSoftReset(pAd); - - // Default value in BBP R22 is 0x0. - BbpData = 0; - - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - - // Clean bit4 to stop continuous Tx production test. - MacData &= 0xFFFFFFEF; - - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - -#ifdef RALINK_28xx_QA - // add this for LoopBack mode - if (pAd->ate.bQARxStart == FALSE) - { - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - } - - if (pAd->ate.bQATxStart == TRUE) - { - pAd->ate.TxStatus = 1; - //pAd->ate.Repeat = 0; - } -#else - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); -#endif // RALINK_28xx_QA // - - // Enable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - SetJapanFilter(pAd); - - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); - - pAd->ate.TxDoneCount = 0; - - // Setup frame format - ATESetUpFrame(pAd, 0); - - // Start Tx, RX DMA. - RtmpDmaEnable(pAd, 1); - - // Check count is continuous or not yet. - // - // Due to the type mismatch between "pAd->BulkOutRemained"(atomic_t) and "pAd->ate.TxCount"(UINT32) - // - if (pAd->ate.TxCount == 0) - { - InterlockedExchange(&pAd->BulkOutRemained, 0); - } - else - { - InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount); - } - ATEDBGPRINT(RT_DEBUG_TRACE, ("bulk out count = %d\n", atomic_read(&pAd->BulkOutRemained))); - ASSERT((atomic_read(&pAd->BulkOutRemained) >= 0)); - - if (atomic_read(&pAd->BulkOutRemained) == 0) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packet countinuously\n")); - - /* In 28xx, NdisAcquireSpinLock() == spin_lock_bh() */ - /* NdisAcquireSpinLock only need one argument in 28xx. */ - NdisAcquireSpinLock(&pAd->GenericLock); - pAd->ContinBulkOut = TRUE; - NdisReleaseSpinLock(&pAd->GenericLock); - - /* In 28xx, BULK_OUT_LOCK() == spin_lock_irqsave() */ - BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK - pAd->BulkOutPending[0] = FALSE; - BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packets depend on counter\n")); - - NdisAcquireSpinLock(&pAd->GenericLock); - pAd->ContinBulkOut = FALSE; - NdisReleaseSpinLock(&pAd->GenericLock); - - BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags); - pAd->BulkOutPending[0] = FALSE; - BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags); - } - - RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - - // Kick bulk out - RTUSBKickBulkOut(pAd); - } -#ifdef RALINK_28xx_QA - else if (!strcmp(arg, "TXSTOP")) //Enter ATE mode and set Tx/Rx Idle - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n")); - - atemode = pAd->ate.Mode; - pAd->ate.Mode &= ATE_TXSTOP; - pAd->ate.bQATxStart = FALSE; -// pAd->ate.TxDoneCount = pAd->ate.TxCount; - -/*=========================================================================*/ - if (atemode & ATE_TXCARR) - { - // No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0] - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - } - else if (atemode & ATE_TXCARRSUPP) - { - // No Cont. TX set BBP R22 bit7=0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData &= ~(1 << 7); //set bit7=0 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - - // No Carrier Suppression set BBP R24 bit0=0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData); - BbpData &= 0xFFFFFFFE; //clear bit0 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData); - } - else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP)) - { - if (atemode & ATE_TXCONT) - { - // No Cont. TX set BBP R22 bit7=0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData); - BbpData &= ~(1 << 7); //set bit7=0 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - } - } - -/*=========================================================================*/ - RTUSBRejectPendingPackets(pAd); - RTUSBCleanUpDataBulkOutQueue(pAd); - - /* not used in RT28xx */ - //RTUSBCleanUpMLMEWaitQueue(pAd); - /* empty function so far */ - RTUSBCleanUpMLMEBulkOutQueue(pAd); -/*=========================================================================*/ - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); -/*=========================================================================*/ - - /* In 28xx, pAd->PendingRx is not of type atomic_t anymore */ -// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish - /* peter todo : BulkInLock */ - while (pAd->PendingRx > 0) - { -#if 1 - ATE_RTUSBCancelPendingBulkInIRP(pAd); -#else -// NdisInterlockedDecrement(&pAd->PendingRx); - pAd->PendingRx--; -#endif - RTMPusecDelay(500000); - } - - while (((pAd->BulkOutPending[0] == TRUE) || - (pAd->BulkOutPending[1] == TRUE) || - (pAd->BulkOutPending[2] == TRUE) || - (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish - { - do - { - RTUSBCancelPendingBulkOutIRP(pAd); - } while (FALSE); - - RTMPusecDelay(500000); - } - - ASSERT(pAd->PendingRx == 0); -/*=========================================================================*/ - // Enable Tx, Rx DMA. - RtmpDmaEnable(pAd, 1); - - /* task Tx status : 0 --> task is idle, 1 --> task is running */ - pAd->ate.TxStatus = 0; - - // Soft reset BBP. - BbpSoftReset(pAd); - - // Disable Tx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - MacData &= (0xfffffffb); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - - //Clean ATE Bulk in/out counter and continue setup - InterlockedExchange(&pAd->BulkOutRemained, 0); - - pAd->ContinBulkOut = FALSE; - } - else if (!strcmp(arg, "RXSTOP")) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n")); - atemode = pAd->ate.Mode; - - // Disable Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - pAd->ate.Mode &= ATE_RXSTOP; - pAd->ate.bQARxStart = FALSE; -// pAd->ate.TxDoneCount = pAd->ate.TxCount; - -/*=========================================================================*/ - RTUSBRejectPendingPackets(pAd); - RTUSBCleanUpDataBulkOutQueue(pAd); - - /* not used in RT28xx */ - //RTUSBCleanUpMLMEWaitQueue(pAd); - RTUSBCleanUpMLMEBulkOutQueue(pAd); -/*=========================================================================*/ - - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); -/*=========================================================================*/ -// while ((atomic_read(&pAd->PendingRx) > 0)) - while (pAd->PendingRx > 0) - { -#if 1 - ATE_RTUSBCancelPendingBulkInIRP(pAd); -#else -// NdisInterlockedDecrement(&pAd->PendingRx); - pAd->PendingRx--; -#endif - RTMPusecDelay(500000); - } - - while (((pAd->BulkOutPending[0] == TRUE) || - (pAd->BulkOutPending[1] == TRUE) || - (pAd->BulkOutPending[2] == TRUE) || - (pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish - { - do - { - RTUSBCancelPendingBulkOutIRP(pAd); - } while (FALSE); - - RTMPusecDelay(500000); - } - - ASSERT(pAd->PendingRx == 0); -/*=========================================================================*/ - - // Soft reset BBP. - BbpSoftReset(pAd); - pAd->ContinBulkIn = FALSE; - } -#endif // RALINK_28xx_QA // - else if (!strcmp(arg, "RXFRAME")) // Rx Frames - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n")); - - // Disable Rx of MAC block - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Default value in BBP R22 is 0x0. - BbpData = 0; - - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData); - // Clean bit4 to stop continuous Tx production test. - MacData &= 0xFFFFFFEF; - - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); - - pAd->ate.Mode |= ATE_RXFRAME; - - // Abort Tx, RX DMA. - RtmpDmaEnable(pAd, 0); - - // Disable TX of MAC block - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= ~(1 << 2); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Reset Rx RING. - for ( i = 0; i < (RX_RING_SIZE); i++) - { - PRX_CONTEXT pRxContext = &(pAd->RxContext[i]); - - pRxContext->InUse = FALSE; - pRxContext->IRPPending = FALSE; - pRxContext->Readable = FALSE; - - // - // Get the urb from kernel back to driver. - // - RTUSB_UNLINK_URB(pRxContext->pUrb); - - /* Sleep 200 microsecs to give cancellation time to work. */ - NdisMSleep(200); - pAd->BulkInReq = 0; - -// InterlockedExchange(&pAd->PendingRx, 0); - pAd->PendingRx = 0; - pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index - pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer - pAd->NextRxBulkInPosition = 0; - } - - // read to clear counters - RTUSBReadMACRegister(pAd, RX_STA_CNT0, &temp); //RX PHY & RX CRC count - RTUSBReadMACRegister(pAd, RX_STA_CNT1, &temp); //RX PLCP error count & CCA false alarm count - RTUSBReadMACRegister(pAd, RX_STA_CNT2, &temp); //RX FIFO overflow frame count & RX duplicated filtered frame count - - pAd->ContinBulkIn = TRUE; - - // Enable Tx, RX DMA. - RtmpDmaEnable(pAd, 1); - - // Enable RX of MAC block - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value |= (1 << 3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Kick bulk in - RTUSBBulkReceive(pAd); - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n")); - return FALSE; - } - RTMPusecDelay(5000); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n")); - - return TRUE; -} -#endif // RT2870 // - -INT Set_ATE_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - if (ATECmdHandler(pAd, arg)) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n")); - - - return TRUE; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n")); - return FALSE; - } -} - -/* - ========================================================================== - Description: - Set ATE ADDR1=DA for TxFrame(AP : To DS = 0 ; From DS = 1) - or - Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0) - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_DA_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR *value; - INT i; - - if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17 - return FALSE; - - for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":")) - { - if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) ) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - AtoH(value, &pAd->ate.Addr3[i++], 1); -#endif // CONFIG_STA_SUPPORT // - } - - if(i != 6) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0], - pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5])); -#endif // CONFIG_STA_SUPPORT // - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n")); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE ADDR3=SA for TxFrame(AP : To DS = 0 ; From DS = 1) - or - Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0) - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_SA_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR *value; - INT i; - - if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17 - return FALSE; - - for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":")) - { - if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) ) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - AtoH(value, &pAd->ate.Addr2[i++], 1); -#endif // CONFIG_STA_SUPPORT // - } - - if(i != 6) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0], - pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5])); -#endif // CONFIG_STA_SUPPORT // - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n")); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE ADDR2=BSSID for TxFrame(AP : To DS = 0 ; From DS = 1) - or - Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0) - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_BSSID_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR *value; - INT i; - - if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17 - return FALSE; - - for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":")) - { - if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) ) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - AtoH(value, &pAd->ate.Addr1[i++], 1); -#endif // CONFIG_STA_SUPPORT // - } - - if(i != 6) - return FALSE; //Invalid - - -#ifdef CONFIG_STA_SUPPORT - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr1[0], - pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5])); -#endif // CONFIG_STA_SUPPORT // - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n")); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx Channel - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_CHANNEL_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR channel; - - channel = simple_strtol(arg, 0, 10); - - if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n")); - return FALSE; - } - pAd->ate.Channel = channel; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx Power0 - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_POWER0_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR TxPower; - - TxPower = simple_strtol(arg, 0, 10); - - if (pAd->ate.Channel <= 14) - { - if ((TxPower > 31) || (TxPower < 0)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower)); - return FALSE; - } - } - else// 5.5GHz - { - if ((TxPower > 15) || (TxPower < -7)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower)); - return FALSE; - } - } - - pAd->ate.TxPower0 = TxPower; - ATETxPwrHandler(pAd, 0); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx Power1 - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_POWER1_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR TxPower; - - TxPower = simple_strtol(arg, 0, 10); - - if (pAd->ate.Channel <= 14) - { - if ((TxPower > 31) || (TxPower < 0)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower)); - return FALSE; - } - } - else - { - if ((TxPower > 15) || (TxPower < -7)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower)); - return FALSE; - } - } - - pAd->ate.TxPower1 = TxPower; - ATETxPwrHandler(pAd, 1); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx Antenna - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_Antenna_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR value; - - value = simple_strtol(arg, 0, 10); - - if ((value > 2) || (value < 0)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value)); - return FALSE; - } - - pAd->ate.TxAntennaSel = value; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel)); - ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Rx Antenna - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_RX_Antenna_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR value; - - value = simple_strtol(arg, 0, 10); - - if ((value > 3) || (value < 0)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value)); - return FALSE; - } - - pAd->ate.RxAntennaSel = value; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE RF frequence offset - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_FREQOFFSET_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR RFFreqOffset; - ULONG R4; - - RFFreqOffset = simple_strtol(arg, 0, 10); -#ifndef RT30xx - if(RFFreqOffset >= 64) -#endif // RT30xx // -#ifdef RT30xx -//2008/08/06: KH modified the limit of offset value from 65 to 95(0x5F) - if(RFFreqOffset >= 95) -#endif // RT30xx // - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n")); - return FALSE; - } - - pAd->ate.RFFreqOffset = RFFreqOffset; -#ifdef RT30xx - if(IS_RT30xx(pAd)) - { - // Set RF offset - UCHAR RFValue; - RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue); - //2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset" - RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset; - RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue); - } - else -#endif // RT30xx // - { - - R4 = pAd->ate.RFFreqOffset << 15; // shift TX power control to correct RF register bit position - R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000))); - pAd->LatchRfRegs.R4 = R4; - - RtmpRfIoWrite(pAd); - } - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE RF BW - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_BW_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - int i; - UCHAR value = 0; - UCHAR BBPCurrentBW; - - BBPCurrentBW = simple_strtol(arg, 0, 10); - - if(BBPCurrentBW == 0) - pAd->ate.TxWI.BW = BW_20; - else - pAd->ate.TxWI.BW = BW_40; - - if(pAd->ate.TxWI.BW == BW_20) - { - if(pAd->ate.Channel <= 14) - { - for (i=0; i<5; i++) - { - if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff) - { - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]); - RTMPusecDelay(5000); - } - } - } - else - { - for (i=0; i<5; i++) - { - if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff) - { - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]); - RTMPusecDelay(5000); - } - } - } - - //Set BBP R4 bit[4:3]=0:0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value); - value &= (~0x18); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value); - - //Set BBP R66=0x3C - value = 0x3C; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value); - //Set BBP R68=0x0B - //to improve Rx sensitivity. - value = 0x0B; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value); - //Set BBP R69=0x16 - value = 0x16; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value); - //Set BBP R70=0x08 - value = 0x08; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value); - //Set BBP R73=0x11 - value = 0x11; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value); - - // If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1 - // (Japan filter coefficients) - // This segment of code will only works when ATETXMODE and ATECHANNEL - // were set to MODE_CCK and 14 respectively before ATETXBW is set to 0. - //===================================================================== - if (pAd->ate.Channel == 14) - { - int TxMode = pAd->ate.TxWI.PHYMODE; - if (TxMode == MODE_CCK) - { - // when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value); - value |= 0x20; //set bit5=1 - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value); - } - } - - //===================================================================== - // If bandwidth != 40M, RF Reg4 bit 21 = 0. -#ifdef RT30xx - // Set BW - if(IS_RT30xx(pAd)) - RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW20RfR24); - else -#endif // RT30xx // - { - pAd->LatchRfRegs.R4 &= ~0x00200000; - RtmpRfIoWrite(pAd); - } - - } - else if(pAd->ate.TxWI.BW == BW_40) - { - if(pAd->ate.Channel <= 14) - { - for (i=0; i<5; i++) - { - if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff) - { - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]); - RTMPusecDelay(5000); - } - } - } - else - { - for (i=0; i<5; i++) - { - if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff) - { - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]); - RTMPusecDelay(5000); - } - } -#ifdef DOT11_N_SUPPORT - if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7)) - { - value = 0x28; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value); - } -#endif // DOT11_N_SUPPORT // - } - - //Set BBP R4 bit[4:3]=1:0 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value); - value &= (~0x18); - value |= 0x10; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value); - - //Set BBP R66=0x3C - value = 0x3C; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value); - //Set BBP R68=0x0C - //to improve Rx sensitivity. - value = 0x0C; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value); - //Set BBP R69=0x1A - value = 0x1A; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value); - //Set BBP R70=0x0A - value = 0x0A; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value); - //Set BBP R73=0x16 - value = 0x16; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value); - - // If bandwidth = 40M, set RF Reg4 bit 21 = 1. -#ifdef RT30xx - // Set BW - if(IS_RT30xx(pAd)) - RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW40RfR24); - else -#endif // RT30xx // - { - pAd->LatchRfRegs.R4 |= 0x00200000; - RtmpRfIoWrite(pAd); - } - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx frame length - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_LENGTH_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - pAd->ate.TxLength = simple_strtol(arg, 0, 10); - - if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */))) - { - pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */); - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */))); - return FALSE; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx frame count - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_COUNT_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - pAd->ate.TxCount = simple_strtol(arg, 0, 10); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx frame MCS - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_MCS_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR MCS; - int result; - - MCS = simple_strtol(arg, 0, 10); - result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS); - - if (result != -1) - { - pAd->ate.TxWI.MCS = (UCHAR)MCS; - } - else - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n")); - return FALSE; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx frame Mode - 0: MODE_CCK - 1: MODE_OFDM - 2: MODE_HTMIX - 3: MODE_HTGREENFIELD - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_MODE_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10); - - if(pAd->ate.TxWI.PHYMODE > 3) - { - pAd->ate.TxWI.PHYMODE = 0; - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n")); - ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n")); - return FALSE; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - Set ATE Tx frame GI - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_TX_GI_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10); - - if(pAd->ate.TxWI.ShortGI > 1) - { - pAd->ate.TxWI.ShortGI = 0; - ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n")); - return FALSE; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n")); - - - return TRUE; -} - -/* - ========================================================================== - Description: - ========================================================================== - */ -INT Set_ATE_RX_FER_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - pAd->ate.bRxFer = simple_strtol(arg, 0, 10); - - if (pAd->ate.bRxFer == 1) - { - pAd->ate.RxCntPerSec = 0; - pAd->ate.RxTotalCnt = 0; - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer)); - ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n")); - - - return TRUE; -} - -INT Set_ATE_Read_RF_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ -#ifdef RT30xx -//2008/07/10:KH add to support RT30xx ATE<-- - if(IS_RT30xx(pAd)) - { - /* modify by WY for Read RF Reg. error */ - UCHAR RFValue; - INT index=0; - for (index = 0; index < 32; index++) - { - RT30xxReadRFRegister(pAd, index, (PUCHAR)&RFValue); - printk("R%d=%d\n",index,RFValue); - } - } - else -//2008/07/10:KH add to support RT30xx ATE--> -#endif // RT30xx // - { - ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1); - ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2); - ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3); - ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4); - } - return TRUE; -} - -INT Set_ATE_Write_RF1_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- - if(IS_RT30xx(pAd)) - { - printk("Warning!! RT30xx Don't Support\n"); - return FALSE; - - } - else -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // - { - UINT32 value = simple_strtol(arg, 0, 16); - - pAd->LatchRfRegs.R1 = value; - RtmpRfIoWrite(pAd); - } - return TRUE; - -} - -INT Set_ATE_Write_RF2_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- - if(IS_RT30xx(pAd)) - { - printk("Warning!! RT30xx Don't Support\n"); - return FALSE; - - } - else -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // - { - UINT32 value = simple_strtol(arg, 0, 16); - - pAd->LatchRfRegs.R2 = value; - RtmpRfIoWrite(pAd); - } - return TRUE; -} - -INT Set_ATE_Write_RF3_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- - if(IS_RT30xx(pAd)) - { - printk("Warning!! RT30xx Don't Support\n"); - return FALSE; - - } - else -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // - { - UINT32 value = simple_strtol(arg, 0, 16); - - pAd->LatchRfRegs.R3 = value; - RtmpRfIoWrite(pAd); - } - return TRUE; -} - -INT Set_ATE_Write_RF4_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- - if(IS_RT30xx(pAd)) - { - printk("Warning!! RT30xx Don't Support\n"); - return FALSE; - - } - else -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // - { - UINT32 value = simple_strtol(arg, 0, 16); - - pAd->LatchRfRegs.R4 = value; - RtmpRfIoWrite(pAd); - } - return TRUE; -} -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- -INT SET_ATE_3070RF_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - CHAR *this_char; - CHAR *value; - UINT32 Reg,RFValue; - if(IS_RT30xx(pAd)) - { - printk("SET_ATE_3070RF_Proc=%s\n",arg); - this_char =arg; - if ((value = strchr(this_char, ':')) != NULL) - *value++ = 0; - Reg= simple_strtol(this_char, 0, 16); - RFValue= simple_strtol(value, 0, 16); - printk("RF Reg[%d]=%d\n",Reg,RFValue); - RT30xxWriteRFRegister(pAd, Reg,RFValue); - } - else - printk("Warning!! Only 3070 Support\n"); - return TRUE; -} -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // -/* - ========================================================================== - Description: - Load and Write EEPROM from a binary file prepared in advance. - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ATE_Load_E2P_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - BOOLEAN ret = FALSE; - PUCHAR src = EEPROM_BIN_FILE_NAME; - struct file *srcf; - INT32 retval, orgfsuid, orgfsgid; - mm_segment_t orgfs; - USHORT WriteEEPROM[(EEPROM_SIZE/2)]; - UINT32 FileLength = 0; - UINT32 value = simple_strtol(arg, 0, 10); - - ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __func__, value)); - - if (value > 0) - { - /* zero the e2p buffer */ - NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE); - - /* save uid and gid used for filesystem access. - ** set user and group to 0 (root) - */ - orgfsuid = current->fsuid; - orgfsgid = current->fsgid; - /* as root */ - current->fsuid = current->fsgid = 0; - orgfs = get_fs(); - set_fs(KERNEL_DS); - - do - { - /* open the bin file */ - srcf = filp_open(src, O_RDONLY, 0); - - if (IS_ERR(srcf)) - { - ate_print("%s - Error %ld opening %s\n", __func__, -PTR_ERR(srcf), src); - break; - } - - /* the object must have a read method */ - if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL)) - { - ate_print("%s - %s does not have a read method\n", __func__, src); - break; - } - - /* read the firmware from the file *.bin */ - FileLength = srcf->f_op->read(srcf, - (PUCHAR)WriteEEPROM, - EEPROM_SIZE, - &srcf->f_pos); - - if (FileLength != EEPROM_SIZE) - { - ate_print("%s: error file length (=%d) in e2p.bin\n", - __func__, FileLength); - break; - } - else - { - /* write the content of .bin file to EEPROM */ - rt_ee_write_all(pAd, WriteEEPROM); - ret = TRUE; - } - break; - } while(TRUE); - - /* close firmware file */ - if (IS_ERR(srcf)) - { - ; - } - else - { - retval = filp_close(srcf, NULL); - if (retval) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src)); - - } - } - - /* restore */ - set_fs(orgfs); - current->fsuid = orgfsuid; - current->fsgid = orgfsgid; - } - ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __func__, ret)); - - return ret; - -} - -INT Set_ATE_Read_E2P_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - USHORT buffer[EEPROM_SIZE/2]; - USHORT *p; - int i; - - rt_ee_read_all(pAd, (USHORT *)buffer); - p = buffer; - for (i = 0; i < (EEPROM_SIZE/2); i++) - { - ate_print("%4.4x ", *p); - if (((i+1) % 16) == 0) - ate_print("\n"); - p++; - } - return TRUE; -} - -INT Set_ATE_Show_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ate_print("Mode=%d\n", pAd->ate.Mode); - ate_print("TxPower0=%d\n", pAd->ate.TxPower0); - ate_print("TxPower1=%d\n", pAd->ate.TxPower1); - ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel); - ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel); - ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW); - ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI); - ate_print("MCS=%d\n", pAd->ate.TxWI.MCS); - ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE); - ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n", - pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]); - ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n", - pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]); - ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n", - pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]); - ate_print("Channel=%d\n", pAd->ate.Channel); - ate_print("TxLength=%d\n", pAd->ate.TxLength); - ate_print("TxCount=%u\n", pAd->ate.TxCount); - ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset); - ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n"); - return TRUE; -} - -INT Set_ATE_Help_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n"); - ate_print("ATEDA\n"); - ate_print("ATESA\n"); - ate_print("ATEBSSID\n"); - ate_print("ATECHANNEL, range:0~14(unless A band !)\n"); - ate_print("ATETXPOW0, set power level of antenna 1.\n"); - ate_print("ATETXPOW1, set power level of antenna 2.\n"); - ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n"); - ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n"); - ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n"); - ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n"); - ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */)); - ate_print("ATETXCNT, set how many frame going to transmit.\n"); - ate_print("ATETXMCS, set MCS, reference to rate table.\n"); - ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n"); - ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n"); - ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n"); - ate_print("ATERRF, show all RF registers.\n"); - ate_print("ATEWRF1, set RF1 register.\n"); - ate_print("ATEWRF2, set RF2 register.\n"); - ate_print("ATEWRF3, set RF3 register.\n"); - ate_print("ATEWRF4, set RF4 register.\n"); - ate_print("ATELDE2P, load EEPROM from .bin file.\n"); - ate_print("ATERE2P, display all EEPROM content.\n"); - ate_print("ATESHOW, display all parameters of ATE.\n"); - ate_print("ATEHELP, online help.\n"); - - return TRUE; -} - -/* - ========================================================================== - Description: - - AsicSwitchChannel() dedicated for ATE. - - ========================================================================== -*/ -VOID ATEAsicSwitchChannel( - IN PRTMP_ADAPTER pAd) -{ - UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0; - CHAR TxPwer = 0, TxPwer2 = 0; - UCHAR index, BbpValue = 0, R66 = 0x30; - RTMP_RF_REGS *RFRegTable; - UCHAR Channel; - -#ifdef RALINK_28xx_QA - if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE)) - { - if (pAd->ate.Channel != pAd->LatchRfRegs.Channel) - { - pAd->ate.Channel = pAd->LatchRfRegs.Channel; - } - return; - } - else -#endif // RALINK_28xx_QA // - Channel = pAd->ate.Channel; - - // Select antenna - AsicAntennaSelect(pAd, Channel); - - // fill Tx power value - TxPwer = pAd->ate.TxPower0; - TxPwer2 = pAd->ate.TxPower1; -#ifdef RT30xx -//2008/07/10:KH add to support 3070 ATE<-- - - // The RF programming sequence is difference between 3xxx and 2xxx - // The 3070 is 1T1R. Therefore, we don't need to set the number of Tx/Rx path and the only job is to set the parameters of channels. - if (IS_RT30xx(pAd) && ((pAd->RfIcType == RFIC_3020) || -(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022) || -(pAd->RfIcType == RFIC_2020))) - { - /* modify by WY for Read RF Reg. error */ - UCHAR RFValue; - - for (index = 0; index < NUM_OF_3020_CHNL; index++) - { - if (Channel == FreqItems3020[index].Channel) - { - // Programming channel parameters - RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N); - RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K); - - RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue); - RFValue = (RFValue & 0xFC) | FreqItems3020[index].R; - RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue); - - // Set Tx Power - RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue); - RFValue = (RFValue & 0xE0) | TxPwer; - RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue); - - // Set RF offset - RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue); - //2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset" - RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset; - RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue); - - // Set BW - if (pAd->ate.TxWI.BW == BW_40) - { - RFValue = pAd->Mlme.CaliBW40RfR24; - //DISABLE_11N_CHECK(pAd); - } - else - { - RFValue = pAd->Mlme.CaliBW20RfR24; - } - RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue); - - // Enable RF tuning - RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue); - RFValue = RFValue | 0x1; - RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue); - - // latch channel for future usage. - pAd->LatchRfRegs.Channel = Channel; - - break; - } - } - - DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", - Channel, - pAd->RfIcType, - TxPwer, - TxPwer2, - pAd->Antenna.field.TxPath, - FreqItems3020[index].N, - FreqItems3020[index].K, - FreqItems3020[index].R)); - } - else -//2008/07/10:KH add to support 3070 ATE--> -#endif // RT30xx // -{ - RFRegTable = RF2850RegTable; - - switch (pAd->RfIcType) - { - /* But only 2850 and 2750 support 5.5GHz band... */ - case RFIC_2820: - case RFIC_2850: - case RFIC_2720: - case RFIC_2750: - - for (index = 0; index < NUM_OF_2850_CHNL; index++) - { - if (Channel == RFRegTable[index].Channel) - { - R2 = RFRegTable[index].R2; - if (pAd->Antenna.field.TxPath == 1) - { - R2 |= 0x4000; // If TXpath is 1, bit 14 = 1; - } - - if (pAd->Antenna.field.RxPath == 2) - { - switch (pAd->ate.RxAntennaSel) - { - case 1: - R2 |= 0x20040; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x00; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - case 2: - R2 |= 0x10040; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x01; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - default: - R2 |= 0x40; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - /* Only enable two Antenna to receive. */ - BbpValue |= 0x08; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - } - } - else if (pAd->Antenna.field.RxPath == 1) - { - R2 |= 0x20040; // write 1 to off RxPath - } - - if (pAd->Antenna.field.TxPath == 2) - { - if (pAd->ate.TxAntennaSel == 1) - { - R2 |= 0x4000; // If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue); - BbpValue &= 0xE7; //11100111B - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue); - } - else if (pAd->ate.TxAntennaSel == 2) - { - R2 |= 0x8000; // If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1 - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue); - BbpValue &= 0xE7; - BbpValue |= 0x08; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue); - } - else - { - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue); - BbpValue &= 0xE7; - BbpValue |= 0x10; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue); - } - } - if (pAd->Antenna.field.RxPath == 3) - { - switch (pAd->ate.RxAntennaSel) - { - case 1: - R2 |= 0x20040; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x00; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - case 2: - R2 |= 0x10040; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x01; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - case 3: - R2 |= 0x30000; - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x02; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - default: - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue); - BbpValue &= 0xE4; - BbpValue |= 0x10; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue); - break; - } - } - - if (Channel > 14) - { - // initialize R3, R4 - R3 = (RFRegTable[index].R3 & 0xffffc1ff); - R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15); - - // According the Rory's suggestion to solve the middle range issue. - // 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB - // R3 - if ((TxPwer >= -7) && (TxPwer < 0)) - { - TxPwer = (7+TxPwer); - TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer); - R3 |= (TxPwer << 10); - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer)); - } - else - { - TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer); - R3 |= (TxPwer << 10) | (1 << 9); - } - - // R4 - if ((TxPwer2 >= -7) && (TxPwer2 < 0)) - { - TxPwer2 = (7+TxPwer2); - TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2); - R4 |= (TxPwer2 << 7); - ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2)); - } - else - { - TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2); - R4 |= (TxPwer2 << 7) | (1 << 6); - } - } - else - { - R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0 - R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1 - } - - // Based on BBP current mode before changing RF channel. - if (pAd->ate.TxWI.BW == BW_40) - { - R4 |=0x200000; - } - - // Update variables - pAd->LatchRfRegs.Channel = Channel; - pAd->LatchRfRegs.R1 = RFRegTable[index].R1; - pAd->LatchRfRegs.R2 = R2; - pAd->LatchRfRegs.R3 = R3; - pAd->LatchRfRegs.R4 = R4; - - RtmpRfIoWrite(pAd); - - break; - } - } - break; - - default: - break; - } -} - // Change BBP setting during switch from a->g, g->a - if (Channel <= 14) - { - ULONG TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A - - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd))); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd))); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd))); - - /* For 1T/2R chip only... */ - if (pAd->NicConfig2.field.ExternalLNAForG) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62); - } - else - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84); - } - - // According the Rory's suggestion to solve the middle range issue. - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue); - ASSERT((BbpValue == 0x00)); - if ((BbpValue != 0x00)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00); - } - - // 5.5GHz band selection PIN, bit1 and bit2 are complement - RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); - Value &= (~0x6); - Value |= (0x04); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - - // Turn off unused PA or LNA when only 1T or 1R. - if (pAd->Antenna.field.TxPath == 1) - { - TxPinCfg &= 0xFFFFFFF3; - } - if (pAd->Antenna.field.RxPath == 1) - { - TxPinCfg &= 0xFFFFF3FF; - } - - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg); - } - else - { - ULONG TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05 - - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd))); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd))); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd))); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2); - - // According the Rory's suggestion to solve the middle range issue. - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue); - ASSERT((BbpValue == 0x00)); - if ((BbpValue != 0x00)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00); - } - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue); - ASSERT((BbpValue == 0x04)); - - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue); - ASSERT((BbpValue == 0x00)); - - // 5.5GHz band selection PIN, bit1 and bit2 are complement - RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); - Value &= (~0x6); - Value |= (0x02); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - - // Turn off unused PA or LNA when only 1T or 1R. - if (pAd->Antenna.field.TxPath == 1) - { - TxPinCfg &= 0xFFFFFFF3; - } - if (pAd->Antenna.field.RxPath == 1) - { - TxPinCfg &= 0xFFFFF3FF; - } - - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg); - } - - // R66 should be set according to Channel and use 20MHz when scanning - if (Channel <= 14) - { - // BG band - R66 = 0x2E + GET_LNA_GAIN(pAd); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - else - { - // 5.5 GHz band - if (pAd->ate.TxWI.BW == BW_20) - { - R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - else - { - R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); - } - } - - // - // On 11A, We should delay and wait RF/BBP to be stable - // and the appropriate time should be 1000 micro seconds - // 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL. - // - RTMPusecDelay(1000); - - if (Channel > 14) - { - // When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not. - ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n", - Channel, - pAd->RfIcType, - pAd->Antenna.field.TxPath, - pAd->LatchRfRegs.R1, - pAd->LatchRfRegs.R2, - pAd->LatchRfRegs.R3, - pAd->LatchRfRegs.R4)); - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n", - Channel, - pAd->RfIcType, - (R3 & 0x00003e00) >> 9, - (R4 & 0x000007c0) >> 6, - pAd->Antenna.field.TxPath, - pAd->LatchRfRegs.R1, - pAd->LatchRfRegs.R2, - pAd->LatchRfRegs.R3, - pAd->LatchRfRegs.R4)); - } -} - -// -// In fact, no one will call this routine so far ! -// -/* - ========================================================================== - Description: - Gives CCK TX rate 2 more dB TX power. - This routine works only in ATE mode. - - calculate desired Tx power in RF R3.Tx0~5, should consider - - 0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment) - 1. TxPowerPercentage - 2. auto calibration based on TSSI feedback - 3. extra 2 db for CCK - 4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP - - NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment), - it should be called AFTER MlmeDynamicTxRateSwitching() - ========================================================================== - */ -VOID ATEAsicAdjustTxPower( - IN PRTMP_ADAPTER pAd) -{ - INT i, j; - CHAR DeltaPwr = 0; - BOOLEAN bAutoTxAgc = FALSE; - UCHAR TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep; - UCHAR BbpR49 = 0, idx; - PCHAR pTxAgcCompensate; - ULONG TxPwr[5]; - CHAR Value; - - /* no one calls this procedure so far */ - if (pAd->ate.TxWI.BW == BW_40) - { - if (pAd->ate.Channel > 14) - { - TxPwr[0] = pAd->Tx40MPwrCfgABand[0]; - TxPwr[1] = pAd->Tx40MPwrCfgABand[1]; - TxPwr[2] = pAd->Tx40MPwrCfgABand[2]; - TxPwr[3] = pAd->Tx40MPwrCfgABand[3]; - TxPwr[4] = pAd->Tx40MPwrCfgABand[4]; - } - else - { - TxPwr[0] = pAd->Tx40MPwrCfgGBand[0]; - TxPwr[1] = pAd->Tx40MPwrCfgGBand[1]; - TxPwr[2] = pAd->Tx40MPwrCfgGBand[2]; - TxPwr[3] = pAd->Tx40MPwrCfgGBand[3]; - TxPwr[4] = pAd->Tx40MPwrCfgGBand[4]; - } - } - else - { - if (pAd->ate.Channel > 14) - { - TxPwr[0] = pAd->Tx20MPwrCfgABand[0]; - TxPwr[1] = pAd->Tx20MPwrCfgABand[1]; - TxPwr[2] = pAd->Tx20MPwrCfgABand[2]; - TxPwr[3] = pAd->Tx20MPwrCfgABand[3]; - TxPwr[4] = pAd->Tx20MPwrCfgABand[4]; - } - else - { - TxPwr[0] = pAd->Tx20MPwrCfgGBand[0]; - TxPwr[1] = pAd->Tx20MPwrCfgGBand[1]; - TxPwr[2] = pAd->Tx20MPwrCfgGBand[2]; - TxPwr[3] = pAd->Tx20MPwrCfgGBand[3]; - TxPwr[4] = pAd->Tx20MPwrCfgGBand[4]; - } - } - - // TX power compensation for temperature variation based on TSSI. - // Do it per 4 seconds. - if (pAd->Mlme.OneSecPeriodicRound % 4 == 0) - { - if (pAd->ate.Channel <= 14) - { - /* bg channel */ - bAutoTxAgc = pAd->bAutoTxAgcG; - TssiRef = pAd->TssiRefG; - pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0]; - pTssiPlusBoundary = &pAd->TssiPlusBoundaryG[0]; - TxAgcStep = pAd->TxAgcStepG; - pTxAgcCompensate = &pAd->TxAgcCompensateG; - } - else - { - /* a channel */ - bAutoTxAgc = pAd->bAutoTxAgcA; - TssiRef = pAd->TssiRefA; - pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0]; - pTssiPlusBoundary = &pAd->TssiPlusBoundaryA[0]; - TxAgcStep = pAd->TxAgcStepA; - pTxAgcCompensate = &pAd->TxAgcCompensateA; - } - - if (bAutoTxAgc) - { - /* BbpR49 is unsigned char */ - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49); - - /* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */ - /* compensate: +4 +3 +2 +1 0 -1 -2 -3 -4 * steps */ - /* step value is defined in pAd->TxAgcStepG for tx power value */ - - /* [4]+1+[4] p4 p3 p2 p1 o1 m1 m2 m3 m4 */ - /* ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0 - above value are examined in mass factory production */ - /* [4] [3] [2] [1] [0] [1] [2] [3] [4] */ - - /* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */ - /* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */ - /* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */ - - if (BbpR49 > pTssiMinusBoundary[1]) - { - // Reading is larger than the reference value. - // Check for how large we need to decrease the Tx power. - for (idx = 1; idx < 5; idx++) - { - if (BbpR49 <= pTssiMinusBoundary[idx]) // Found the range - break; - } - // The index is the step we should decrease, idx = 0 means there is nothing to compensate -// if (R3 > (ULONG) (TxAgcStep * (idx-1))) - *pTxAgcCompensate = -(TxAgcStep * (idx-1)); -// else -// *pTxAgcCompensate = -((UCHAR)R3); - - DeltaPwr += (*pTxAgcCompensate); - ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n", - BbpR49, TssiRef, TxAgcStep, idx-1)); - } - else if (BbpR49 < pTssiPlusBoundary[1]) - { - // Reading is smaller than the reference value - // check for how large we need to increase the Tx power - for (idx = 1; idx < 5; idx++) - { - if (BbpR49 >= pTssiPlusBoundary[idx]) // Found the range - break; - } - // The index is the step we should increase, idx = 0 means there is nothing to compensate - *pTxAgcCompensate = TxAgcStep * (idx-1); - DeltaPwr += (*pTxAgcCompensate); - ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n", - BbpR49, TssiRef, TxAgcStep, idx-1)); - } - else - { - *pTxAgcCompensate = 0; - ATEDBGPRINT(RT_DEBUG_TRACE, (" Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n", - BbpR49, TssiRef, TxAgcStep, 0)); - } - } - } - else - { - if (pAd->ate.Channel <= 14) - { - bAutoTxAgc = pAd->bAutoTxAgcG; - pTxAgcCompensate = &pAd->TxAgcCompensateG; - } - else - { - bAutoTxAgc = pAd->bAutoTxAgcA; - pTxAgcCompensate = &pAd->TxAgcCompensateA; - } - - if (bAutoTxAgc) - DeltaPwr += (*pTxAgcCompensate); - } - - /* calculate delta power based on the percentage specified from UI */ - // E2PROM setting is calibrated for maximum TX power (i.e. 100%) - // We lower TX power here according to the percentage specified from UI - if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) // AUTO TX POWER control - ; - else if (pAd->CommonCfg.TxPowerPercentage > 90) // 91 ~ 100% & AUTO, treat as 100% in terms of mW - ; - else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW - { - DeltaPwr -= 1; - } - else if (pAd->CommonCfg.TxPowerPercentage > 30) // 31 ~ 60%, treat as 50% in terms of mW - { - DeltaPwr -= 3; - } - else if (pAd->CommonCfg.TxPowerPercentage > 15) // 16 ~ 30%, treat as 25% in terms of mW - { - DeltaPwr -= 6; - } - else if (pAd->CommonCfg.TxPowerPercentage > 9) // 10 ~ 15%, treat as 12.5% in terms of mW - { - DeltaPwr -= 9; - } - else // 0 ~ 9 %, treat as MIN(~3%) in terms of mW - { - DeltaPwr -= 12; - } - - /* reset different new tx power for different TX rate */ - for(i=0; i<5; i++) - { - if (TxPwr[i] != 0xffffffff) - { - for (j=0; j<8; j++) - { - Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */ - - if ((Value + DeltaPwr) < 0) - { - Value = 0; /* min */ - } - else if ((Value + DeltaPwr) > 0xF) - { - Value = 0xF; /* max */ - } - else - { - Value += DeltaPwr; /* temperature compensation */ - } - - /* fill new value to CSR offset */ - TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4); - } - - /* write tx power value to CSR */ - /* TX_PWR_CFG_0 (8 tx rate) for TX power for OFDM 12M/18M - TX power for OFDM 6M/9M - TX power for CCK5.5M/11M - TX power for CCK1M/2M */ - /* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */ - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]); - - - } - } - -} - -/* - ======================================================================== - Routine Description: - Write TxWI for ATE mode. - - Return Value: - None - ======================================================================== -*/ - -#ifdef RT2870 -static VOID ATEWriteTxWI( - IN PRTMP_ADAPTER pAd, - IN PTXWI_STRUC pTxWI, - IN BOOLEAN FRAG, - IN BOOLEAN InsTimestamp, - IN BOOLEAN AMPDU, - IN BOOLEAN Ack, - IN BOOLEAN NSeq, // HW new a sequence. - IN UCHAR BASize, - IN UCHAR WCID, - IN ULONG Length, - IN UCHAR PID, - IN UCHAR MIMOps, - IN UCHAR Txopmode, - IN BOOLEAN CfAck, - IN HTTRANSMIT_SETTING Transmit) -{ - // - // Always use Long preamble before verifiation short preamble functionality works well. - // Todo: remove the following line if short preamble functionality works - // - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); - pTxWI->FRAG= FRAG; - pTxWI->TS= InsTimestamp; - pTxWI->AMPDU = AMPDU; - - pTxWI->MIMOps = PWR_ACTIVE; - pTxWI->MpduDensity = 4; - pTxWI->ACK = Ack; - pTxWI->txop = Txopmode; - pTxWI->NSEQ = NSeq; - pTxWI->BAWinSize = BASize; - - pTxWI->WirelessCliID = WCID; - pTxWI->MPDUtotalByteCount = Length; - pTxWI->PacketId = PID; - - pTxWI->BW = Transmit.field.BW; - pTxWI->ShortGI = Transmit.field.ShortGI; - pTxWI->STBC= Transmit.field.STBC; - - pTxWI->MCS = Transmit.field.MCS; - pTxWI->PHYMODE= Transmit.field.MODE; - -#ifdef DOT11_N_SUPPORT - // - // MMPS is 802.11n features. Because TxWI->MCS > 7 must be HT mode, - // so need not check if it's HT rate. - // - if ((MIMOps == MMPS_STATIC) && (pTxWI->MCS > 7)) - pTxWI->MCS = 7; - - if ((MIMOps == MMPS_DYNAMIC) && (pTxWI->MCS > 7)) // SMPS protect 2 spatial. - pTxWI->MIMOps = 1; -#endif // DOT11_N_SUPPORT // - - pTxWI->CFACK = CfAck; - - return; -} -#endif // RT2870 // -/* - ======================================================================== - - Routine Description: - Disable protection for ATE. - ======================================================================== -*/ -VOID ATEDisableAsicProtect( - IN PRTMP_ADAPTER pAd) -{ - PROT_CFG_STRUC ProtCfg, ProtCfg4; - UINT32 Protect[6]; - USHORT offset; - UCHAR i; - UINT32 MacReg = 0; - - // Config ASIC RTS threshold register - RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg); - MacReg &= 0xFF0000FF; - MacReg |= (pAd->CommonCfg.RtsThreshold << 8); - RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg); - - // Initial common protection settings - RTMPZeroMemory(Protect, sizeof(Protect)); - ProtCfg4.word = 0; - ProtCfg.word = 0; - ProtCfg.field.TxopAllowGF40 = 1; - ProtCfg.field.TxopAllowGF20 = 1; - ProtCfg.field.TxopAllowMM40 = 1; - ProtCfg.field.TxopAllowMM20 = 1; - ProtCfg.field.TxopAllowOfdm = 1; - ProtCfg.field.TxopAllowCck = 1; - ProtCfg.field.RTSThEn = 1; - ProtCfg.field.ProtectNav = ASIC_SHORTNAV; - - // Handle legacy(B/G) protection - ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate; - ProtCfg.field.ProtectCtrl = 0; - Protect[0] = ProtCfg.word; - Protect[1] = ProtCfg.word; - - // NO PROTECT - // 1.All STAs in the BSS are 20/40 MHz HT - // 2. in ai 20/40MHz BSS - // 3. all STAs are 20MHz in a 20MHz BSS - // Pure HT. no protection. - - // MM20_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 010111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4004 (OFDM 24M) - Protect[2] = 0x01744004; - - // MM40_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 111111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) - Protect[3] = 0x03f44084; - - // CF20_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 010111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4004 (OFDM 24M) - Protect[4] = 0x01744004; - - // CF40_PROT_CFG - // Reserved (31:27) - // PROT_TXOP(25:20) -- 111111 - // PROT_NAV(19:18) -- 01 (Short NAV protection) - // PROT_CTRL(17:16) -- 00 (None) - // PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M) - Protect[5] = 0x03f44084; - - pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE; - - offset = CCK_PROT_CFG; - for (i = 0;i < 6;i++) - RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]); - -} - -#ifdef RT2870 -/* - ======================================================================== - Routine Description: - Write TxInfo for ATE mode. - - Return Value: - None - ======================================================================== -*/ -static VOID ATEWriteTxInfo( - IN PRTMP_ADAPTER pAd, - IN PTXINFO_STRUC pTxInfo, - IN USHORT USBDMApktLen, - IN BOOLEAN bWiv, - IN UCHAR QueueSel, - IN UCHAR NextValid, - IN UCHAR TxBurst) -{ - pTxInfo->USBDMATxPktLen = USBDMApktLen; - pTxInfo->QSEL = QueueSel; - - if (QueueSel != FIFO_EDCA) - ATEDBGPRINT(RT_DEBUG_TRACE, ("=======> QueueSel != FIFO_EDCA<=======\n")); - - pTxInfo->USBDMANextVLD = NextValid; - pTxInfo->USBDMATxburst = TxBurst; - pTxInfo->WIV = bWiv; - pTxInfo->SwUseLastRound = 0; - pTxInfo->rsv = 0; - pTxInfo->rsv2 = 0; - - return; -} -#endif // RT2870 // - -/* There are two ways to convert Rssi */ -#if 1 -// -// The way used with GET_LNA_GAIN(). -// -CHAR ATEConvertToRssi( - IN PRTMP_ADAPTER pAd, - IN CHAR Rssi, - IN UCHAR RssiNumber) -{ - UCHAR RssiOffset, LNAGain; - - // Rssi equals to zero should be an invalid value - if (Rssi == 0) - return -99; - - LNAGain = GET_LNA_GAIN(pAd); - if (pAd->LatchRfRegs.Channel > 14) - { - if (RssiNumber == 0) - RssiOffset = pAd->ARssiOffset0; - else if (RssiNumber == 1) - RssiOffset = pAd->ARssiOffset1; - else - RssiOffset = pAd->ARssiOffset2; - } - else - { - if (RssiNumber == 0) - RssiOffset = pAd->BGRssiOffset0; - else if (RssiNumber == 1) - RssiOffset = pAd->BGRssiOffset1; - else - RssiOffset = pAd->BGRssiOffset2; - } - - return (-12 - RssiOffset - LNAGain - Rssi); -} -#else -// -// The way originally used in ATE of rt2860ap. -// -CHAR ATEConvertToRssi( - IN PRTMP_ADAPTER pAd, - IN CHAR Rssi, - IN UCHAR RssiNumber) -{ - UCHAR RssiOffset, LNAGain; - - // Rssi equals to zero should be an invalid value - if (Rssi == 0) - return -99; - - if (pAd->LatchRfRegs.Channel > 14) - { - LNAGain = pAd->ALNAGain; - if (RssiNumber == 0) - RssiOffset = pAd->ARssiOffset0; - else if (RssiNumber == 1) - RssiOffset = pAd->ARssiOffset1; - else - RssiOffset = pAd->ARssiOffset2; - } - else - { - LNAGain = pAd->BLNAGain; - if (RssiNumber == 0) - RssiOffset = pAd->BGRssiOffset0; - else if (RssiNumber == 1) - RssiOffset = pAd->BGRssiOffset1; - else - RssiOffset = pAd->BGRssiOffset2; - } - - return (-32 - RssiOffset + LNAGain - Rssi); -} -#endif /* end of #if 1 */ - -/* - ======================================================================== - - Routine Description: - Set Japan filter coefficients if needed. - Note: - This routine should only be called when - entering TXFRAME mode or TXCONT mode. - - ======================================================================== -*/ -static VOID SetJapanFilter( - IN PRTMP_ADAPTER pAd) -{ - UCHAR BbpData = 0; - - // - // If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1 - // (Japan Tx filter coefficients)when (TXFRAME or TXCONT). - // - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData); - - if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20)) - { - BbpData |= 0x20; // turn on - ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n")); - } - else - { - BbpData &= 0xdf; // turn off - ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n")); - } - - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData); -} - -VOID ATESampleRssi( - IN PRTMP_ADAPTER pAd, - IN PRXWI_STRUC pRxWI) -{ - /* There are two ways to collect RSSI. */ -#if 1 - //pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ; - if (pRxWI->RSSI0 != 0) - { - pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0); - pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0; - pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3; - } - if (pRxWI->RSSI1 != 0) - { - pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1); - pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1; - pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3; - } - if (pRxWI->RSSI2 != 0) - { - pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2); - pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2; - pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3; - } - - pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ? - pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ? - - pAd->ate.NumOfAvgRssiSample ++; -#else - pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0); - pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1); - pAd->ate.RxCntPerSec++; - pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0); - pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1); - pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2); - pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0; - pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3; - pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1; - pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3; - pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2; - pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3; - pAd->ate.NumOfAvgRssiSample ++; -#endif -} - -#ifdef CONFIG_STA_SUPPORT -VOID RTMPStationStop( - IN PRTMP_ADAPTER pAd) -{ -// BOOLEAN Cancelled; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n")); - - // For rx statistics, we need to keep this timer running. -// RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n")); -} - -VOID RTMPStationStart( - IN PRTMP_ADAPTER pAd) -{ - ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n")); - ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n")); -} -#endif // CONFIG_STA_SUPPORT // - -/* - ========================================================================== - Description: - Setup Frame format. - NOTE: - This routine should only be used in ATE mode. - ========================================================================== - */ - -#ifdef RT2870 -/*======================Start of RT2870======================*/ -/* */ -/* */ -static INT ATESetUpFrame( - IN PRTMP_ADAPTER pAd, - IN UINT32 TxIdx) -{ - UINT j; - PTX_CONTEXT pNullContext; - PUCHAR pDest; - HTTRANSMIT_SETTING TxHTPhyMode; - PTXWI_STRUC pTxWI; - PTXINFO_STRUC pTxInfo; - UINT32 TransferBufferLength, OrgBufferLength = 0; - UCHAR padLen = 0; -#ifdef RALINK_28xx_QA - PHEADER_802_11 pHeader80211 = NULL; -#endif // RALINK_28xx_QA // - - if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) || - (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) || - (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) || - (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) - { - return -1; - } - - /* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */ - - pNullContext = &(pAd->NullContext); - ASSERT(pNullContext != NULL); - - if (pNullContext->InUse == FALSE) - { - // Set the in use bit - pNullContext->InUse = TRUE; - NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11)); - - // Fill 802.11 header. -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - pHeader80211 = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen); -// pDest = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen); -// pHeader80211 = (PHEADER_802_11)pDest; - } - else -#endif // RALINK_28xx_QA // - { - // Fill 802.11 header. - NdisMoveMemory(&(pAd->NullFrame), TemplateFrame, sizeof(HEADER_802_11)); - } -#ifdef RT_BIG_ENDIAN - RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE); -#endif // RT_BIG_ENDIAN // - -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - /* modify sequence number.... */ - if (pAd->ate.TxDoneCount == 0) - { - pAd->ate.seq = pHeader80211->Sequence; - } - else - { - pHeader80211->Sequence = ++pAd->ate.seq; - } - /* We already got all the addr. fields from QA GUI. */ - } - else -#endif // RALINK_28xx_QA // - { - COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->ate.Addr1); - COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->ate.Addr2); - COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->ate.Addr3); - } - - RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);//??? - pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0]; - -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - // Avoid to exceed the range of WirelessPacket[]. - ASSERT(pAd->ate.TxInfo.USBDMATxPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */)); - NdisMoveMemory(pTxInfo, &(pAd->ate.TxInfo), sizeof(pAd->ate.TxInfo)); - } - else -#endif // RALINK_28xx_QA // - { - // Avoid to exceed the range of WirelessPacket[]. - ASSERT(pAd->ate.TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */)); - - // pTxInfo->USBDMATxPktLen will be updated to include padding later. - ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWI_SIZE + pAd->ate.TxLength), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE); - pTxInfo->QSEL = FIFO_EDCA; - } - - pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE]; - - // Fill TxWI. - if (pAd->ate.bQATxStart == TRUE) - { - TxHTPhyMode.field.BW = pAd->ate.TxWI.BW; - TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI; - TxHTPhyMode.field.STBC = pAd->ate.TxWI.STBC; - TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS; - TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE; - ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.TS, pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ, - pAd->ate.TxWI.BAWinSize, BSSID_WCID, pAd->ate.TxWI.MPDUtotalByteCount/* include 802.11 header */, pAd->ate.TxWI.PacketId, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, TxHTPhyMode); - } - else - { - TxHTPhyMode.field.BW = pAd->ate.TxWI.BW; - TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI; - TxHTPhyMode.field.STBC = 0; - TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS; - TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE; - - ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE/* No ack required. */, FALSE, 0, BSSID_WCID, pAd->ate.TxLength, - 0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);// "MMPS_STATIC" instead of "MMPS_DYNAMIC" ??? - } - - RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11)); - - pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE+sizeof(HEADER_802_11)]); - - // Prepare frame payload -#ifdef RALINK_28xx_QA - if (pAd->ate.bQATxStart == TRUE) - { - // copy pattern - if ((pAd->ate.PLen != 0)) - { - for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen) - { - RTMPMoveMemory(pDest, pAd->ate.Pattern, pAd->ate.PLen); - pDest += pAd->ate.PLen; - } - } - TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxWI.MPDUtotalByteCount; - } - else -#endif // RALINK_28xx_QA // - { - for (j = 0; j < (pAd->ate.TxLength - sizeof(HEADER_802_11)); j++) - { - *pDest = 0xA5; - pDest += 1; - } - TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxLength; - } - -#if 1 - OrgBufferLength = TransferBufferLength; - TransferBufferLength = (TransferBufferLength + 3) & (~3); - - // Always add 4 extra bytes at every packet. - padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */ - ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */))); - - /* Now memzero all extra padding bytes. */ - NdisZeroMemory(pDest, padLen); - pDest += padLen; -#else - if ((TransferBufferLength % 4) == 1) - { - NdisZeroMemory(pDest, 7); - pDest += 7; - TransferBufferLength += 3; - } - else if ((TransferBufferLength % 4) == 2) - { - NdisZeroMemory(pDest, 6); - pDest += 6; - TransferBufferLength += 2; - } - else if ((TransferBufferLength % 4) == 3) - { - NdisZeroMemory(pDest, 5); - pDest += 5; - TransferBufferLength += 1; - } -#endif // 1 // - - // Update pTxInfo->USBDMATxPktLen to include padding. - pTxInfo->USBDMATxPktLen = TransferBufferLength - TXINFO_SIZE; - - TransferBufferLength += 4; - - // If TransferBufferLength is multiple of 64, add extra 4 bytes again. - if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0) - { - NdisZeroMemory(pDest, 4); - TransferBufferLength += 4; - } - - // Fill out frame length information for global Bulk out arbitor - pAd->NullContext.BulkOutSize = TransferBufferLength; - } -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI); - RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo)+TXWI_SIZE+TXINFO_SIZE), DIR_WRITE, FALSE); - RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO); -#endif // RT_BIG_ENDIAN // - return 0; -} - -VOID ATE_RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs) -{ - PRTMP_ADAPTER pAd; - PTX_CONTEXT pNullContext; - UCHAR BulkOutPipeId; - NTSTATUS Status; - unsigned long IrqFlags; - ULONG OldValue; - - pNullContext = (PTX_CONTEXT)pUrb->context; - pAd = pNullContext->pAd; - - - // Reset Null frame context flags - pNullContext->IRPPending = FALSE; - pNullContext->InUse = FALSE; - Status = pUrb->status; - - // Store BulkOut PipeId - BulkOutPipeId = pNullContext->BulkOutPipeId; - pAd->BulkOutDataOneSecCount++; - - if (Status == USB_ST_NOERROR) - { -#ifdef RALINK_28xx_QA - if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE)) - { - if (pAd->ate.QID == BulkOutPipeId) - { - // Let Rx can have a chance to break in during Tx process, - // especially for loopback mode in QA ATE. - // To trade off between tx performance and loopback mode integrity. - /* Q : Now Rx is handled by tasklet, do we still need this delay ? */ - /* Ans : Even tasklet is used, Rx/Tx < 1 if we do not delay for a while right here. */ - RTMPusecDelay(500); - pAd->ate.TxDoneCount++; - pAd->RalinkCounters.KickTxCount++; - ASSERT(pAd->ate.QID == 0); - pAd->ate.TxAc0++; - } - } -#endif // RALINK_28xx_QA // - pAd->BulkOutComplete++; - - pAd->Counters8023.GoodTransmits++; - - /* Don't worry about the queue is empty or not. This function will check itself. */ - RTMPDeQueuePacket(pAd, TRUE, BulkOutPipeId, MAX_TX_PROCESS); - - /* In 28xx, SendTxWaitQueue ==> TxSwQueue */ -/* - if (pAd->SendTxWaitQueue[BulkOutPipeId].Number > 0) - { - RTMPDeQueuePacket(pAd, BulkOutPipeId); - } -*/ - } - else // STATUS_OTHER - { - pAd->BulkOutCompleteOther++; - - ATEDBGPRINT(RT_DEBUG_ERROR, ("BulkOutDataPacket Failed STATUS_OTHER = 0x%x . \n", Status)); - ATEDBGPRINT(RT_DEBUG_ERROR, (">>BulkOutReq=0x%lx, BulkOutComplete=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete)); - - if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))) - { - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET); - /* In 28xx, RT_OID_USB_RESET_BULK_OUT ==> CMDTHREAD_RESET_BULK_OUT */ - RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0); - // Check - BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - pAd->BulkOutPending[BulkOutPipeId] = FALSE; - pAd->bulkResetPipeid = BulkOutPipeId; - BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - return; - } - } - - - - if (atomic_read(&pAd->BulkOutRemained) > 0) - { - atomic_dec(&pAd->BulkOutRemained); - } - - // 1st - Transmit Success - OldValue = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart; - pAd->WlanCounters.TransmittedFragmentCount.u.LowPart++; - - if (pAd->WlanCounters.TransmittedFragmentCount.u.LowPart < OldValue) - { - pAd->WlanCounters.TransmittedFragmentCount.u.HighPart++; - } - - if(((pAd->ContinBulkOut == TRUE ) ||(atomic_read(&pAd->BulkOutRemained) > 0)) && (pAd->ate.Mode & ATE_TXFRAME)) - { - RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - } - else - { - RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); -#ifdef RALINK_28xx_QA - pAd->ate.TxStatus = 0; -#endif // RALINK_28xx_QA // - } - - BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - pAd->BulkOutPending[BulkOutPipeId] = FALSE; - BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - - // Always call Bulk routine, even reset bulk. - // The protection of rest bulk should be in BulkOut routine. - RTUSBKickBulkOut(pAd); -} - -/* - ======================================================================== - - Routine Description: - - Arguments: - - Return Value: - - Note: - - ======================================================================== -*/ -VOID ATE_RTUSBBulkOutDataPacket( - IN PRTMP_ADAPTER pAd, - IN UCHAR BulkOutPipeId) -{ - PTX_CONTEXT pNullContext = &(pAd->NullContext); - PURB pUrb; - int ret = 0; - unsigned long IrqFlags; - - - ASSERT(BulkOutPipeId == 0); - - /* Build up the frame first. */ -// ATESetUpFrame(pAd, 0); - - BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - - if (pAd->BulkOutPending[BulkOutPipeId] == TRUE) - { - BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - return; - } - - pAd->BulkOutPending[BulkOutPipeId] = TRUE; - BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - - // Increase Total transmit byte counter - pAd->RalinkCounters.OneSecTransmittedByteCount += pNullContext->BulkOutSize; - pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize; - - // Clear ATE frame bulk out flag - RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE); - - // Init Tx context descriptor - pNullContext->IRPPending = TRUE; - RTUSBInitTxDesc(pAd, pNullContext, BulkOutPipeId, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete); - pUrb = pNullContext->pUrb; - - if((ret = RTUSB_SUBMIT_URB(pUrb))!=0) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret)); - return; - } - - pAd->BulkOutReq++; - return; - -} - -/* - ======================================================================== - - Routine Description: - - Arguments: - - Return Value: - - Note: - - ======================================================================== -*/ -VOID ATE_RTUSBCancelPendingBulkInIRP( - IN PRTMP_ADAPTER pAd) -{ - PRX_CONTEXT pRxContext; - UINT i; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("--->ATE_RTUSBCancelPendingBulkInIRP\n")); -#if 1 - for ( i = 0; i < (RX_RING_SIZE); i++) - { - pRxContext = &(pAd->RxContext[i]); - if(pRxContext->IRPPending == TRUE) - { - RTUSB_UNLINK_URB(pRxContext->pUrb); - pRxContext->IRPPending = FALSE; - pRxContext->InUse = FALSE; - //NdisInterlockedDecrement(&pAd->PendingRx); - //pAd->PendingRx--; - } - } -#else - for ( i = 0; i < (RX_RING_SIZE); i++) - { - pRxContext = &(pAd->RxContext[i]); - if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE) - { - RTUSB_UNLINK_URB(pRxContext->pUrb); - } - InterlockedExchange(&pRxContext->IrpLock, IRPLOCK_CANCE_START); - } -#endif // 1 // - ATEDBGPRINT(RT_DEBUG_TRACE, ("<---ATE_RTUSBCancelPendingBulkInIRP\n")); - return; -} -#endif // RT2870 // - -VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data) -{ - USHORT i; - USHORT value; - - for (i = 0 ; i < EEPROM_SIZE/2 ; ) - { - /* "value" is expecially for some compilers... */ - RT28xx_EEPROM_READ16(pAd, i*2, value); - Data[i] = value; - i++; - } -} - -VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data) -{ - USHORT i; - USHORT value; - - for (i = 0 ; i < EEPROM_SIZE/2 ; ) - { - /* "value" is expecially for some compilers... */ - value = Data[i]; - RT28xx_EEPROM_WRITE16(pAd, i*2, value); - i ++; - } -} -#ifdef RALINK_28xx_QA -VOID ATE_QA_Statistics( - IN PRTMP_ADAPTER pAd, - IN PRXWI_STRUC pRxWI, - IN PRT28XX_RXD_STRUC pRxD, - IN PHEADER_802_11 pHeader) -{ - // update counter first - if (pHeader != NULL) - { - if (pHeader->FC.Type == BTYPE_DATA) - { - if (pRxD->U2M) - pAd->ate.U2M++; - else - pAd->ate.OtherData++; - } - else if (pHeader->FC.Type == BTYPE_MGMT) - { - if (pHeader->FC.SubType == SUBTYPE_BEACON) - pAd->ate.Beacon++; - else - pAd->ate.OtherCount++; - } - else if (pHeader->FC.Type == BTYPE_CNTL) - { - pAd->ate.OtherCount++; - } - } - pAd->ate.RSSI0 = pRxWI->RSSI0; - pAd->ate.RSSI1 = pRxWI->RSSI1; - pAd->ate.RSSI2 = pRxWI->RSSI2; - pAd->ate.SNR0 = pRxWI->SNR0; - pAd->ate.SNR1 = pRxWI->SNR1; -} - -/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */ -#define RACFG_CMD_RF_WRITE_ALL 0x0000 -#define RACFG_CMD_E2PROM_READ16 0x0001 -#define RACFG_CMD_E2PROM_WRITE16 0x0002 -#define RACFG_CMD_E2PROM_READ_ALL 0x0003 -#define RACFG_CMD_E2PROM_WRITE_ALL 0x0004 -#define RACFG_CMD_IO_READ 0x0005 -#define RACFG_CMD_IO_WRITE 0x0006 -#define RACFG_CMD_IO_READ_BULK 0x0007 -#define RACFG_CMD_BBP_READ8 0x0008 -#define RACFG_CMD_BBP_WRITE8 0x0009 -#define RACFG_CMD_BBP_READ_ALL 0x000a -#define RACFG_CMD_GET_COUNTER 0x000b -#define RACFG_CMD_CLEAR_COUNTER 0x000c - -#define RACFG_CMD_RSV1 0x000d -#define RACFG_CMD_RSV2 0x000e -#define RACFG_CMD_RSV3 0x000f - -#define RACFG_CMD_TX_START 0x0010 -#define RACFG_CMD_GET_TX_STATUS 0x0011 -#define RACFG_CMD_TX_STOP 0x0012 -#define RACFG_CMD_RX_START 0x0013 -#define RACFG_CMD_RX_STOP 0x0014 -#define RACFG_CMD_GET_NOISE_LEVEL 0x0015 - -#define RACFG_CMD_ATE_START 0x0080 -#define RACFG_CMD_ATE_STOP 0x0081 - -#define RACFG_CMD_ATE_START_TX_CARRIER 0x0100 -#define RACFG_CMD_ATE_START_TX_CONT 0x0101 -#define RACFG_CMD_ATE_START_TX_FRAME 0x0102 -#define RACFG_CMD_ATE_SET_BW 0x0103 -#define RACFG_CMD_ATE_SET_TX_POWER0 0x0104 -#define RACFG_CMD_ATE_SET_TX_POWER1 0x0105 -#define RACFG_CMD_ATE_SET_FREQ_OFFSET 0x0106 -#define RACFG_CMD_ATE_GET_STATISTICS 0x0107 -#define RACFG_CMD_ATE_RESET_COUNTER 0x0108 -#define RACFG_CMD_ATE_SEL_TX_ANTENNA 0x0109 -#define RACFG_CMD_ATE_SEL_RX_ANTENNA 0x010a -#define RACFG_CMD_ATE_SET_PREAMBLE 0x010b -#define RACFG_CMD_ATE_SET_CHANNEL 0x010c -#define RACFG_CMD_ATE_SET_ADDR1 0x010d -#define RACFG_CMD_ATE_SET_ADDR2 0x010e -#define RACFG_CMD_ATE_SET_ADDR3 0x010f -#define RACFG_CMD_ATE_SET_RATE 0x0110 -#define RACFG_CMD_ATE_SET_TX_FRAME_LEN 0x0111 -#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT 0x0112 -#define RACFG_CMD_ATE_START_RX_FRAME 0x0113 -#define RACFG_CMD_ATE_E2PROM_READ_BULK 0x0114 -#define RACFG_CMD_ATE_E2PROM_WRITE_BULK 0x0115 -#define RACFG_CMD_ATE_IO_WRITE_BULK 0x0116 -#define RACFG_CMD_ATE_BBP_READ_BULK 0x0117 -#define RACFG_CMD_ATE_BBP_WRITE_BULK 0x0118 -#define RACFG_CMD_ATE_RF_READ_BULK 0x0119 -#define RACFG_CMD_ATE_RF_WRITE_BULK 0x011a - - - -#define A2Hex(_X, _p) \ -{ \ - UCHAR *p; \ - _X = 0; \ - p = _p; \ - while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9'))) \ - { \ - if ((*p >= 'a') && (*p <= 'f')) \ - _X = _X * 16 + *p - 87; \ - else if ((*p >= 'A') && (*p <= 'F')) \ - _X = _X * 16 + *p - 55; \ - else if ((*p >= '0') && (*p <= '9')) \ - _X = _X * 16 + *p - 48; \ - p++; \ - } \ -} - - -static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len); -static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len); -static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len); - -#define LEN_OF_ARG 16 - -VOID RtmpDoAte( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq) -{ - unsigned short Command_Id; - struct ate_racfghdr *pRaCfg; - INT Status = NDIS_STATUS_SUCCESS; - - - - if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL) - { - Status = -EINVAL; - return; - } - - NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr)); - - if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length)) - { - Status = -EFAULT; - kfree(pRaCfg); - return; - } - - - Command_Id = ntohs(pRaCfg->command_id); - - ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __func__, Command_Id)); - - switch (Command_Id) - { - // We will get this command when QA starts. - case RACFG_CMD_ATE_START: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n")); - - // prepare feedback as soon as we can to avoid QA timeout. - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n")); - } - Set_ATE_Proc(pAdapter, "ATESTART"); - } - break; - - // We will get this command either QA is closed or ated is killed by user. - case RACFG_CMD_ATE_STOP: - { - INT32 ret; - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n")); - - // Distinguish this command came from QA(via ated) - // or ate daemon according to the existence of pid in payload. - // No need to prepare feedback if this cmd came directly from ate daemon. - pRaCfg->length = ntohs(pRaCfg->length); - - if (pRaCfg->length == sizeof(pAdapter->ate.AtePid)) - { - // This command came from QA. - // Get the pid of ATE daemon. - memcpy((UCHAR *)&pAdapter->ate.AtePid, - (&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */, - sizeof(pAdapter->ate.AtePid)); - - // prepare feedback as soon as we can to avoid QA timeout. - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n")); - Status = -EFAULT; - } - - // - // kill ATE daemon when leaving ATE mode. - // We must kill ATE daemon first before setting ATESTOP, - // or Microsoft will report sth. wrong. - ret = kill_proc(pAdapter->ate.AtePid, SIGTERM, 1); - if (ret) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name)); - } - } - - // AP might have in ATE_STOP mode due to cmd from QA. - if (ATE_ON(pAdapter)) - { - // Someone has killed ate daemon while QA GUI is still open. - Set_ATE_Proc(pAdapter, "ATESTOP"); - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n")); - } - } - break; - - case RACFG_CMD_RF_WRITE_ALL: - { - UINT32 R1, R2, R3, R4; - USHORT channel; - - memcpy(&R1, pRaCfg->data-2, 4); - memcpy(&R2, pRaCfg->data+2, 4); - memcpy(&R3, pRaCfg->data+6, 4); - memcpy(&R4, pRaCfg->data+10, 4); - memcpy(&channel, pRaCfg->data+14, 2); - - pAdapter->LatchRfRegs.R1 = ntohl(R1); - pAdapter->LatchRfRegs.R2 = ntohl(R2); - pAdapter->LatchRfRegs.R3 = ntohl(R3); - pAdapter->LatchRfRegs.R4 = ntohl(R4); - pAdapter->LatchRfRegs.Channel = ntohs(channel); - - RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1); - RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2); - RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3); - RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n")); - } - } - break; - - case RACFG_CMD_E2PROM_READ16: - { - USHORT offset, value, tmp; - - offset = ntohs(pRaCfg->status); - /* "tmp" is expecially for some compilers... */ - RT28xx_EEPROM_READ16(pAdapter, offset, tmp); - value = tmp; - value = htons(value); - - ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value)); - - // prepare feedback - pRaCfg->length = htons(4); - pRaCfg->status = htons(0); - memcpy(pRaCfg->data, &value, 2); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr))); - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n")); - } - } - break; - - case RACFG_CMD_E2PROM_WRITE16: - { - USHORT offset, value; - - offset = ntohs(pRaCfg->status); - memcpy(&value, pRaCfg->data, 2); - value = ntohs(value); - RT28xx_EEPROM_WRITE16(pAdapter, offset, value); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n")); - } - } - break; - - case RACFG_CMD_E2PROM_READ_ALL: - { - USHORT buffer[EEPROM_SIZE/2]; - - rt_ee_read_all(pAdapter,(USHORT *)buffer); - memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE); - - // prepare feedback - pRaCfg->length = htons(2+EEPROM_SIZE); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n")); - } - } - break; - - case RACFG_CMD_E2PROM_WRITE_ALL: - { - USHORT buffer[EEPROM_SIZE/2]; - - NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE); - memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE); - rt_ee_write_all(pAdapter,(USHORT *)buffer); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n")); - } - - } - break; - - case RACFG_CMD_IO_READ: - { - UINT32 offset; - UINT32 value; - - memcpy(&offset, &pRaCfg->status, 4); - offset = ntohl(offset); - - // We do not need the base address. - // So just extract the offset out. - offset &= 0x0000FFFF; - RTMP_IO_READ32(pAdapter, offset, &value); - value = htonl(value); - - // prepare feedback - pRaCfg->length = htons(6); - pRaCfg->status = htons(0); - memcpy(pRaCfg->data, &value, 4); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n")); - } - } - break; - - case RACFG_CMD_IO_WRITE: - { - UINT32 offset, value; - - memcpy(&offset, pRaCfg->data-2, 4); - memcpy(&value, pRaCfg->data+2, 4); - - offset = ntohl(offset); - - // We do not need the base address. - // So just extract out the offset. - offset &= 0x0000FFFF; - value = ntohl(value); - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value)); - RTMP_IO_WRITE32(pAdapter, offset, value); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n")); - } - } - break; - - case RACFG_CMD_IO_READ_BULK: - { - UINT32 offset; - USHORT len; - - memcpy(&offset, &pRaCfg->status, 4); - offset = ntohl(offset); - - // We do not need the base address. - // So just extract the offset. - offset &= 0x0000FFFF; - memcpy(&len, pRaCfg->data+2, 2); - len = ntohs(len); - - if (len > 371) - { - ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n")); - pRaCfg->length = htons(2); - pRaCfg->status = htons(1); - break; - } - - RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes - - // prepare feedback - pRaCfg->length = htons(2+len*4);// unit in four bytes - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n")); - } - } - break; - - case RACFG_CMD_BBP_READ8: - { - USHORT offset; - UCHAR value; - - value = 0; - offset = ntohs(pRaCfg->status); - - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value); - } - else - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value); - } - // prepare feedback - pRaCfg->length = htons(3); - pRaCfg->status = htons(0); - pRaCfg->data[0] = value; - - ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value)); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n")); - } - } - break; - case RACFG_CMD_BBP_WRITE8: - { - USHORT offset; - UCHAR value; - - offset = ntohs(pRaCfg->status); - memcpy(&value, pRaCfg->data, 1); - - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value); - } - else - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value); - } - - if ((offset == BBP_R1) || (offset == BBP_R3)) - { - SyncTxRxConfig(pAdapter, offset, value); - } - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n")); - } - } - break; - - case RACFG_CMD_BBP_READ_ALL: - { - USHORT j; - - for (j = 0; j < 137; j++) - { - pRaCfg->data[j] = 0; - - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]); - } - else - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]); - } - } - - // prepare feedback - pRaCfg->length = htons(2+137); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n")); - } - } - - break; - - case RACFG_CMD_ATE_E2PROM_READ_BULK: - { - USHORT offset; - USHORT len; - USHORT buffer[EEPROM_SIZE/2]; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - rt_ee_read_all(pAdapter,(USHORT *)buffer); - if (offset + len <= EEPROM_SIZE) - memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len); - else - ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n")); - - // prepare feedback - pRaCfg->length = htons(2+len); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n")); - } - - } - break; - - case RACFG_CMD_ATE_E2PROM_WRITE_BULK: - { - USHORT offset; - USHORT len; - USHORT buffer[EEPROM_SIZE/2]; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - rt_ee_read_all(pAdapter,(USHORT *)buffer); - memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len); - rt_ee_write_all(pAdapter,(USHORT *)buffer); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n")); - } - - } - break; - - case RACFG_CMD_ATE_IO_WRITE_BULK: - { - UINT32 offset, i, value; - USHORT len; - - memcpy(&offset, &pRaCfg->status, 4); - offset = ntohl(offset); - memcpy(&len, pRaCfg->data+2, 2); - len = ntohs(len); - - for (i = 0; i < len; i += 4) - { - memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4); - printk("Write %x %x\n", offset + i, value); - RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value); - } - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n")); - } - - } - break; - - case RACFG_CMD_ATE_BBP_READ_BULK: - { - USHORT offset; - USHORT len; - USHORT j; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - - for (j = offset; j < (offset+len); j++) - { - pRaCfg->data[j - offset] = 0; - - if (pAdapter->ate.Mode == ATE_STOP) - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]); - } - else - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]); - } - } - - // prepare feedback - pRaCfg->length = htons(2+len); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n")); - } - - } - break; - - case RACFG_CMD_ATE_BBP_WRITE_BULK: - { - USHORT offset; - USHORT len; - USHORT j; - UCHAR *value; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - for (j = offset; j < (offset+len); j++) - { - value = pRaCfg->data + 2 + (j - offset); - if (pAdapter->ate.Mode == ATE_STOP) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value); - } - else - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value); - } - } - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n")); - } - } - break; - -#ifdef CONFIG_RALINK_RT3052 - case RACFG_CMD_ATE_RF_READ_BULK: - { - USHORT offset; - USHORT len; - USHORT j; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - for (j = offset; j < (offset+len); j++) - { - pRaCfg->data[j - offset] = 0; - RT30xxReadRFRegister(pAdapter, j, &pRaCfg->data[j - offset]); - } - - // prepare feedback - pRaCfg->length = htons(2+len); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n")); - } - - } - break; - - case RACFG_CMD_ATE_RF_WRITE_BULK: - { - USHORT offset; - USHORT len; - USHORT j; - UCHAR *value; - - offset = ntohs(pRaCfg->status); - memcpy(&len, pRaCfg->data, 2); - len = ntohs(len); - - for (j = offset; j < (offset+len); j++) - { - value = pRaCfg->data + 2 + (j - offset); - RT30xxWriteRFRegister(pAdapter, j, *value); - } - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n")); - } - - } - break; -#endif - - - case RACFG_CMD_GET_NOISE_LEVEL: - { - UCHAR channel; - INT32 buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */ - - channel = (ntohs(pRaCfg->status) & 0x00FF); - CalNoiseLevel(pAdapter, channel, buffer); - memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10)); - - // prepare feedback - pRaCfg->length = htons(2 + (sizeof(INT32)*3*10)); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n")); - } - } - break; - - case RACFG_CMD_GET_COUNTER: - { - memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4); - memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4); - memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4); - memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4); - memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4); - memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4); - memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4); - memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4); - memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4); - memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4); - memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4); - memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4); - memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4); - memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4); - memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4); - - pRaCfg->length = htons(2+60); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n")); - } - } - break; - - case RACFG_CMD_CLEAR_COUNTER: - { - pAdapter->ate.U2M = 0; - pAdapter->ate.OtherData = 0; - pAdapter->ate.Beacon = 0; - pAdapter->ate.OtherCount = 0; - pAdapter->ate.TxAc0 = 0; - pAdapter->ate.TxAc1 = 0; - pAdapter->ate.TxAc2 = 0; - pAdapter->ate.TxAc3 = 0; - pAdapter->ate.TxHCCA = 0; - pAdapter->ate.TxMgmt = 0; - pAdapter->ate.TxDoneCount = 0; - - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n")); - } - } - - break; - - case RACFG_CMD_TX_START: - { - USHORT *p; - USHORT err = 1; - UCHAR Bbp22Value = 0, Bbp24Value = 0; - - if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME)) - { - ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n")); - err = 2; - goto TX_START_ERROR; - } - else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME)) - { - int i = 0; - - while ((i++ < 10) && (pAdapter->ate.TxStatus != 0)) - { - RTMPusecDelay(5000); - } - - // force it to stop - pAdapter->ate.TxStatus = 0; - pAdapter->ate.TxDoneCount = 0; - //pAdapter->ate.Repeat = 0; - pAdapter->ate.bQATxStart = FALSE; - } - - // If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression. - if (ntohs(pRaCfg->length) != 0) - { - // Get frame info -#ifdef RT2870 - NdisMoveMemory(&pAdapter->ate.TxInfo, pRaCfg->data - 2, 4); -#ifdef RT_BIG_ENDIAN - RTMPDescriptorEndianChange((PUCHAR) &pAdapter->ate.TxInfo, TYPE_TXINFO); -#endif // RT_BIG_ENDIAN // -#endif // RT2870 // - - NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16); -#ifdef RT_BIG_ENDIAN - RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI); -#endif // RT_BIG_ENDIAN // - - NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4); - pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount); - - p = (USHORT *)(&pRaCfg->data[22]); - //p = pRaCfg->data + 22; - // always use QID_AC_BE - pAdapter->ate.QID = 0; - p = (USHORT *)(&pRaCfg->data[24]); - //p = pRaCfg->data + 24; - pAdapter->ate.HLen = ntohs(*p); - - if (pAdapter->ate.HLen > 32) - { - ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n")); - err = 3; - goto TX_START_ERROR; - } - - NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen); - - - pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28); - - if (pAdapter->ate.PLen > 32) - { - ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n")); - err = 4; - goto TX_START_ERROR; - } - - NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen); - pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen; - } - - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value); - - switch (Bbp22Value) - { - case BBP22_TXFRAME: - { - if (pAdapter->ate.TxCount == 0) - { - } - ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n")); - pAdapter->ate.bQATxStart = TRUE; - Set_ATE_Proc(pAdapter, "TXFRAME"); - } - break; - - case BBP22_TXCONT_OR_CARRSUPP: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n")); - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value); - - switch (Bbp24Value) - { - case BBP24_TXCONT: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n")); - pAdapter->ate.bQATxStart = TRUE; - Set_ATE_Proc(pAdapter, "TXCONT"); - } - break; - - case BBP24_CARRSUPP: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n")); - pAdapter->ate.bQATxStart = TRUE; - pAdapter->ate.Mode |= ATE_TXCARRSUPP; - } - break; - - default: - { - ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !")); - } - break; - } - } - break; - - case BBP22_TXCARR: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n")); - pAdapter->ate.bQATxStart = TRUE; - Set_ATE_Proc(pAdapter, "TXCARR"); - } - break; - - default: - { - ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !")); - } - break; - } - - if (pAdapter->ate.bQATxStart == TRUE) - { - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n")); - } - break; - } - -TX_START_ERROR: - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(err); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n")); - } - } - break; - - case RACFG_CMD_GET_TX_STATUS: - { - UINT32 count; - - // prepare feedback - pRaCfg->length = htons(6); - pRaCfg->status = htons(0); - count = htonl(pAdapter->ate.TxDoneCount); - NdisMoveMemory(pRaCfg->data, &count, 4); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n")); - } - } - break; - - case RACFG_CMD_TX_STOP: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n")); - - Set_ATE_Proc(pAdapter, "TXSTOP"); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n")); - } - } - break; - - case RACFG_CMD_RX_START: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n")); - - pAdapter->ate.bQARxStart = TRUE; - Set_ATE_Proc(pAdapter, "RXFRAME"); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n")); - } - } - break; - - case RACFG_CMD_RX_STOP: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n")); - - Set_ATE_Proc(pAdapter, "RXSTOP"); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n")); - } - } - break; - - /* The following cases are for new ATE GUI(not QA). */ - /*==================================================*/ - case RACFG_CMD_ATE_START_TX_CARRIER: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n")); - - Set_ATE_Proc(pAdapter, "TXCARR"); - - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_START_TX_CONT: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n")); - - Set_ATE_Proc(pAdapter, "TXCONT"); - - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_START_TX_FRAME: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n")); - - Set_ATE_Proc(pAdapter, "TXFRAME"); - - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length)); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_BW: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - - Set_ATE_TX_BW_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_TX_POWER0: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_POWER0_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_TX_POWER1: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_POWER1_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_FREQ_OFFSET: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_GET_STATISTICS: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n")); - - memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4); - memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4); - memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4); - memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4); - - if (pAdapter->ate.RxAntennaSel == 0) - { - INT32 RSSI0 = 0; - INT32 RSSI1 = 0; - INT32 RSSI2 = 0; - - RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta); - RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta); - RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta); - memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4); - memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4); - memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4); - pRaCfg->length = htons(2+52); - } - else - { - INT32 RSSI0 = 0; - - RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta); - memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4); - pRaCfg->length = htons(2+44); - } - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_RESET_COUNTER: - { - SHORT value = 1; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n")); - - sprintf((PCHAR)str, "%d", value); - Set_ResetStatCounter_Proc(pAdapter, str); - - pAdapter->ate.TxDoneCount = 0; - - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n")); - } - } - - break; - - case RACFG_CMD_ATE_SEL_TX_ANTENNA: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_Antenna_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SEL_RX_ANTENNA: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_RX_Antenna_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_PREAMBLE: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_MODE_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_CHANNEL: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_CHANNEL_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_ADDR1: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n")); - - // Addr is an array of UCHAR, - // so no need to perform endian swap. - memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0], - pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5])); - } - } - break; - - case RACFG_CMD_ATE_SET_ADDR2: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n")); - - // Addr is an array of UCHAR, - // so no need to perform endian swap. - memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0], - pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5])); - } - } - break; - - case RACFG_CMD_ATE_SET_ADDR3: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n")); - - // Addr is an array of UCHAR, - // so no need to perform endian swap. - memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0], - pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5])); - } - } - break; - - case RACFG_CMD_ATE_SET_RATE: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_MCS_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_TX_FRAME_LEN: - { - SHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_LENGTH_Proc(pAdapter, str); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_SET_TX_FRAME_COUNT: - { - USHORT value = 0; - UCHAR str[LEN_OF_ARG]; - - NdisZeroMemory(str, LEN_OF_ARG); - - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n")); - - memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); - value = ntohs(value); - { - sprintf((PCHAR)str, "%d", value); - Set_ATE_TX_COUNT_Proc(pAdapter, str); - } - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n")); - } - } - break; - - case RACFG_CMD_ATE_START_RX_FRAME: - { - ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n")); - - Set_ATE_Proc(pAdapter, "RXFRAME"); - - // prepare feedback - pRaCfg->length = htons(2); - pRaCfg->status = htons(0); - wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type) - + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length) - + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length); - - if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length)) - { - ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n")); - Status = -EFAULT; - } - else - { - ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n")); - } - } - break; - default: - break; - } - ASSERT(pRaCfg != NULL); - if (pRaCfg != NULL) - { - kfree(pRaCfg); - } - return; -} - -VOID BubbleSort(INT32 n, INT32 a[]) -{ - INT32 k, j, temp; - - for (k = n-1; k>0; k--) - { - for (j = 0; j a[j+1]) - { - temp = a[j]; - a[j]=a[j+1]; - a[j+1]=temp; - } - } - } -} - -VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10]) -{ - INT32 RSSI0, RSSI1, RSSI2; - CHAR Rssi0Offset, Rssi1Offset, Rssi2Offset; - UCHAR BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0; - UCHAR Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0; - USHORT LNA_Gain = 0; - INT32 j = 0; - UCHAR Org_Channel = pAd->ate.Channel; - USHORT GainValue = 0, OffsetValue = 0; - - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value); - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value); - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value); - - //********************************************************************** - // Read the value of LNA gain and Rssi offset - //********************************************************************** - RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue); - - // for Noise Level - if (channel <= 14) - { - LNA_Gain = GainValue & 0x00FF; - - RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue); - Rssi0Offset = OffsetValue & 0x00FF; - Rssi1Offset = (OffsetValue & 0xFF00) >> 8; - RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue); - Rssi2Offset = OffsetValue & 0x00FF; - } - else - { - LNA_Gain = (GainValue & 0xFF00) >> 8; - - RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue); - Rssi0Offset = OffsetValue & 0x00FF; - Rssi1Offset = (OffsetValue & 0xFF00) >> 8; - RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue); - Rssi2Offset = OffsetValue & 0x00FF; - } - //********************************************************************** - { - pAd->ate.Channel = channel; - ATEAsicSwitchChannel(pAd); - mdelay(5); - - data = 0x10; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data); - data = 0x40; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data); - data = 0x40; - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data); - mdelay(5); - - // Start Rx - pAd->ate.bQARxStart = TRUE; - Set_ATE_Proc(pAd, "RXFRAME"); - - mdelay(5); - - for (j = 0; j < 10; j++) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0); - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1); - ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2); - - mdelay(10); - - // Calculate RSSI 0 - if (BbpR50Rssi0 == 0) - { - RSSI0 = -100; - } - else - { - RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset); - } - RSSI[0][j] = RSSI0; - - if ( pAd->Antenna.field.RxPath >= 2 ) // 2R - { - // Calculate RSSI 1 - if (BbpR51Rssi1 == 0) - { - RSSI1 = -100; - } - else - { - RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset); - } - RSSI[1][j] = RSSI1; - } - - if ( pAd->Antenna.field.RxPath >= 3 ) // 3R - { - // Calculate RSSI 2 - if (BbpR52Rssi2 == 0) - RSSI2 = -100; - else - RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset); - - RSSI[2][j] = RSSI2; - } - } - - // Stop Rx - Set_ATE_Proc(pAd, "RXSTOP"); - - mdelay(5); - - BubbleSort(10, RSSI[0]); // 1R - - if ( pAd->Antenna.field.RxPath >= 2 ) // 2R - { - BubbleSort(10, RSSI[1]); - } - - if ( pAd->Antenna.field.RxPath >= 3 ) // 3R - { - BubbleSort(10, RSSI[2]); - } - - } - - pAd->ate.Channel = Org_Channel; - ATEAsicSwitchChannel(pAd); - - // Restore original value - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value); - ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value); - - return; -} - -BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value) -{ - UCHAR tmp = 0, bbp_data = 0; - - if (ATE_ON(pAd)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data); - } - else - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data); - } - - /* confirm again */ - ASSERT(bbp_data == value); - - switch(offset) - { - case BBP_R1: - /* Need to sync. tx configuration with legacy ATE. */ - tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3; - switch(tmp) - { - /* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */ - case 2: - /* All */ - pAd->ate.TxAntennaSel = 0; - break; - /* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */ - case 0: - /* Antenna one */ - pAd->ate.TxAntennaSel = 1; - break; - /* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */ - case 1: - /* Antenna two */ - pAd->ate.TxAntennaSel = 2; - break; - default: - DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong! : return FALSE; \n", __func__)); - return FALSE; - } - break;/* case BBP_R1 */ - - case BBP_R3: - /* Need to sync. rx configuration with legacy ATE. */ - tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */); - switch(tmp) - { - /* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */ - case 3: - /* All */ - pAd->ate.RxAntennaSel = 0; - break; - /* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */ - /* unless the BBP R3 bit[4:3] = 2 */ - case 0: - /* Antenna one */ - pAd->ate.RxAntennaSel = 1; - tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3); - if (tmp == 2)// 3R - { - /* Default : All ADCs will be used by QA */ - pAd->ate.RxAntennaSel = 0; - } - break; - /* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */ - case 1: - /* Antenna two */ - pAd->ate.RxAntennaSel = 2; - break; - /* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */ - case 2: - /* Antenna three */ - pAd->ate.RxAntennaSel = 3; - break; - default: - DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible! : return FALSE; \n", __func__)); - return FALSE; - } - break;/* case BBP_R3 */ - - default: - DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong! : return FALSE; \n", __func__)); - return FALSE; - - } - return TRUE; -} - -static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len) -{ - ULONG i, Value = 0; - ULONG *pDst, *pSrc; - UCHAR *p8; - - p8 = src; - pDst = (ULONG *) dst; - pSrc = (ULONG *) src; - - for (i = 0 ; i < (len/4); i++) - { - /* For alignment issue, we need a variable "Value". */ - memmove(&Value, pSrc, 4); - Value = htonl(Value); - memmove(pDst, &Value, 4); - pDst++; - pSrc++; - } - if ((len % 4) != 0) - { - /* wish that it will never reach here */ - memmove(&Value, pSrc, (len % 4)); - Value = htonl(Value); - memmove(pDst, &Value, (len % 4)); - } -} - -static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len) -{ - ULONG i; - UCHAR *pDst, *pSrc; - - pDst = dst; - pSrc = src; - - for (i = 0; i < (len/2); i++) - { - memmove(pDst, pSrc, 2); - *((USHORT *)pDst) = htons(*((USHORT *)pDst)); - pDst+=2; - pSrc+=2; - } - - if ((len % 2) != 0) - { - memmove(pDst, pSrc, 1); - } -} - -static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len) -{ - UINT32 i, Value; - UINT32 *pDst, *pSrc; - - pDst = (UINT32 *) dst; - pSrc = (UINT32 *) src; - - for (i = 0 ; i < (len/4); i++) - { - RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value); - Value = htonl(Value); - memmove(pDst, &Value, 4); - pDst++; - pSrc++; - } - return; -} - -INT Set_TxStop_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n")); - - if (Set_ATE_Proc(pAd, "TXSTOP")) - { - return TRUE; -} - else - { - return FALSE; - } -} - -INT Set_RxStop_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n")); - - if (Set_ATE_Proc(pAd, "RXSTOP")) - { - return TRUE; -} - else - { - return FALSE; - } -} -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - diff --git a/drivers/staging/rt3070/rt_ate.h b/drivers/staging/rt3070/rt_ate.h deleted file mode 100644 index 011fed7a2afa..000000000000 --- a/drivers/staging/rt3070/rt_ate.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - */ - -#ifndef __ATE_H__ -#define __ATE_H__ - -#define ate_print printk -#define ATEDBGPRINT DBGPRINT - -#ifdef RT2870 -#define EEPROM_SIZE 0x400 -#ifdef CONFIG_STA_SUPPORT -#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2870STA/e2p.bin" -#endif // CONFIG_STA_SUPPORT // -#endif // RT2870 // - -#define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP) - -/* RT2880_iNIC will define "RT2860". */ - -/* RT2880_iNIC will define RT2860. */ - -#ifdef RT2870 -#define EEPROM_SIZE 0x400 -#ifdef CONFIG_STA_SUPPORT -#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2870STA/e2p.bin" -#endif // CONFIG_STA_SUPPORT // -#endif // RT2870 // - -#ifdef RT2870 -#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) -#define ATE_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) - -#define BULK_OUT_LOCK(pLock, IrqFlags) \ - if(1 /*!(in_interrupt() & 0xffff0000)*/) \ - RTMP_IRQ_LOCK((pLock), IrqFlags); - -#define BULK_OUT_UNLOCK(pLock, IrqFlags) \ - if(1 /*!(in_interrupt() & 0xffff0000)*/) \ - RTMP_IRQ_UNLOCK((pLock), IrqFlags); - -// Prototypes of completion funuc. -VOID ATE_RTUSBBulkOutDataPacketComplete( - IN purbb_t purb, - OUT struct pt_regs *pt_regs); - -VOID ATE_RTUSBBulkOutDataPacket( - IN PRTMP_ADAPTER pAd, - IN UCHAR BulkOutPipeId); - -VOID ATE_RTUSBCancelPendingBulkInIRP( - IN PRTMP_ADAPTER pAd); -#endif // RT2870 // - -#ifdef RT30xx -#define ATE_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) -#define ATE_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) -#endif // RT30xx // - - -VOID rt_ee_read_all( - IN PRTMP_ADAPTER pAd, - OUT USHORT *Data); - - -VOID rt_ee_write_all( - IN PRTMP_ADAPTER pAd, - IN USHORT *Data); - -INT Set_ATE_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_DA_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_SA_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_BSSID_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_CHANNEL_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_POWER0_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_POWER1_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_Antenna_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_RX_Antenna_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_FREQOFFSET_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_BW_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_LENGTH_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_COUNT_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_MCS_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_MODE_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_TX_GI_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - - -INT Set_ATE_RX_FER_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Read_RF_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Write_RF1_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Write_RF2_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Write_RF3_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Write_RF4_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Load_E2P_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Read_E2P_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Show_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_ATE_Help_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA -VOID ATE_QA_Statistics( - IN PRTMP_ADAPTER pAd, - IN PRXWI_STRUC pRxWI, - IN PRT28XX_RXD_STRUC p28xxRxD, - IN PHEADER_802_11 pHeader); - -VOID RtmpDoAte( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq); - -VOID BubbleSort( - IN INT32 n, - IN INT32 a[]); - -VOID CalNoiseLevel( - IN PRTMP_ADAPTER pAdapter, - IN UCHAR channel, - OUT INT32 buffer[3][10]); - -BOOLEAN SyncTxRxConfig( - IN PRTMP_ADAPTER pAdapter, - IN USHORT offset, - IN UCHAR value); - -INT Set_TxStop_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -INT Set_RxStop_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg); - -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - -VOID ATEAsicSwitchChannel( - IN PRTMP_ADAPTER pAd); - -VOID ATEAsicAdjustTxPower( - IN PRTMP_ADAPTER pAd); - -VOID ATEDisableAsicProtect( - IN PRTMP_ADAPTER pAd); - -CHAR ATEConvertToRssi( - IN PRTMP_ADAPTER pAd, - IN CHAR Rssi, - IN UCHAR RssiNumber); - -VOID ATESampleRssi( - IN PRTMP_ADAPTER pAd, - IN PRXWI_STRUC pRxWI); - - -#ifdef CONFIG_STA_SUPPORT -VOID RTMPStationStop( - IN PRTMP_ADAPTER pAd); - -VOID RTMPStationStart( - IN PRTMP_ADAPTER pAd); -#endif // CONFIG_STA_SUPPORT // -#endif // __ATE_H__ // diff --git a/drivers/staging/rt3070/rt_config.h b/drivers/staging/rt3070/rt_config.h index 498b2ec2c0cb..1edb76fc527b 100644 --- a/drivers/staging/rt3070/rt_config.h +++ b/drivers/staging/rt3070/rt_config.h @@ -77,10 +77,6 @@ #include "igmp_snoop.h" #endif // IGMP_SNOOP_SUPPORT // -#ifdef RALINK_ATE -#include "rt_ate.h" -#endif // RALINK_ATE // - #ifdef CONFIG_STA_SUPPORT #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT #ifndef WPA_SUPPLICANT_SUPPORT diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c index 1687320b7014..f0d32c2359cd 100644 --- a/drivers/staging/rt3070/rt_main_dev.c +++ b/drivers/staging/rt3070/rt_main_dev.c @@ -1410,15 +1410,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb) int status = 0; PNDIS_PACKET pPacket = (PNDIS_PACKET) skb; - /* RT2870STA does this in RTMPSendPackets() */ -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_RESOURCES); - return 0; - } -#endif // RALINK_ATE // - #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { diff --git a/drivers/staging/rt3070/rtmp.h b/drivers/staging/rt3070/rtmp.h index 2410157fd9b9..6e2c2bf5452f 100644 --- a/drivers/staging/rt3070/rtmp.h +++ b/drivers/staging/rt3070/rtmp.h @@ -285,92 +285,6 @@ extern UCHAR PRE_N_HT_OUI[]; #define MAXSEQ (0xFFF) -#ifdef RALINK_ATE -typedef struct _ATE_INFO { - UCHAR Mode; - CHAR TxPower0; - CHAR TxPower1; - CHAR TxAntennaSel; - CHAR RxAntennaSel; - TXWI_STRUC TxWI; // TXWI - USHORT QID; - UCHAR Addr1[MAC_ADDR_LEN]; - UCHAR Addr2[MAC_ADDR_LEN]; - UCHAR Addr3[MAC_ADDR_LEN]; - UCHAR Channel; - UINT32 TxLength; - UINT32 TxCount; - UINT32 TxDoneCount; // Tx DMA Done - UINT32 RFFreqOffset; - BOOLEAN bRxFer; - BOOLEAN bQATxStart; // Have compiled QA in and use it to ATE tx. - BOOLEAN bQARxStart; // Have compiled QA in and use it to ATE rx. - UINT32 RxTotalCnt; - UINT32 RxCntPerSec; - - CHAR LastSNR0; // last received SNR - CHAR LastSNR1; // last received SNR for 2nd antenna - CHAR LastRssi0; // last received RSSI - CHAR LastRssi1; // last received RSSI for 2nd antenna - CHAR LastRssi2; // last received RSSI for 3rd antenna - CHAR AvgRssi0; // last 8 frames' average RSSI - CHAR AvgRssi1; // last 8 frames' average RSSI - CHAR AvgRssi2; // last 8 frames' average RSSI - SHORT AvgRssi0X8; // sum of last 8 frames' RSSI - SHORT AvgRssi1X8; // sum of last 8 frames' RSSI - SHORT AvgRssi2X8; // sum of last 8 frames' RSSI - - UINT32 NumOfAvgRssiSample; - -#ifdef RALINK_28xx_QA - // Tx frame -#ifdef RT2870 - /* not used in RT2860 */ - TXINFO_STRUC TxInfo; // TxInfo -#endif // RT2870 // - USHORT HLen; // Header Length - USHORT PLen; // Pattern Length - UCHAR Header[32]; // Header buffer - UCHAR Pattern[32]; // Pattern buffer - USHORT DLen; // Data Length - USHORT seq; - UINT32 CID; - pid_t AtePid; - // counters - UINT32 U2M; - UINT32 OtherData; - UINT32 Beacon; - UINT32 OtherCount; - UINT32 TxAc0; - UINT32 TxAc1; - UINT32 TxAc2; - UINT32 TxAc3; - UINT32 TxHCCA; - UINT32 TxMgmt; - UINT32 RSSI0; - UINT32 RSSI1; - UINT32 RSSI2; - UINT32 SNR0; - UINT32 SNR1; - // control - //UINT32 Repeat; // Tx Cpu count - UCHAR TxStatus; // task Tx status // 0 --> task is idle, 1 --> task is running -#endif // RALINK_28xx_QA // -} ATE_INFO, *PATE_INFO; - -#ifdef RALINK_28xx_QA -struct ate_racfghdr { - UINT32 magic_no; - USHORT command_type; - USHORT command_id; - USHORT length; - USHORT sequence; - USHORT status; - UCHAR data[2046]; -} __attribute__((packed)); -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - #ifdef DOT11_N_SUPPORT struct reordering_mpdu { @@ -2753,12 +2667,6 @@ typedef struct _RTMP_ADAPTER struct completion mlmeComplete; struct completion CmdQComplete; wait_queue_head_t *wait; - - //======Lock for 2870 ATE -#ifdef RALINK_ATE - NDIS_SPIN_LOCK GenericLock; // ATE Tx/Rx generic spinlock -#endif // RALINK_ATE // - #endif // RT2870 // @@ -3075,16 +2983,6 @@ typedef struct _RTMP_ADAPTER struct wificonf WIFItestbed; -#ifdef RALINK_ATE - ATE_INFO ate; -#ifdef RT2870 - BOOLEAN ContinBulkOut; //ATE bulk out control - BOOLEAN ContinBulkIn; //ATE bulk in control - atomic_t BulkOutRemained; - atomic_t BulkInRemained; -#endif // RT2870 // -#endif // RALINK_ATE // - #ifdef DOT11_N_SUPPORT struct reordering_mpdu_pool mpdu_blk_pool; #endif // DOT11_N_SUPPORT // diff --git a/drivers/staging/rt3070/rtmp_def.h b/drivers/staging/rt3070/rtmp_def.h index ca1e327da389..694090039b24 100644 --- a/drivers/staging/rt3070/rtmp_def.h +++ b/drivers/staging/rt3070/rtmp_def.h @@ -1359,24 +1359,6 @@ #define INT_MESH 0x0500 // Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode) -#ifdef RALINK_ATE -#define ATE_START 0x00 // Start ATE -#define ATE_STOP 0x80 // Stop ATE -#define ATE_TXCONT 0x05 // Continuous Transmit -#define ATE_TXCARR 0x09 // Transmit Carrier -#define ATE_TXCARRSUPP 0x11 // Transmit Carrier Suppression -#define ATE_TXFRAME 0x01 // Transmit Frames -#define ATE_RXFRAME 0x02 // Receive Frames -#ifdef RALINK_28xx_QA -#define ATE_TXSTOP 0xe2 // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME) -#define ATE_RXSTOP 0xfd // Stop receiving Frames -#define BBP22_TXFRAME 0x00 // Transmit Frames -#define BBP22_TXCONT_OR_CARRSUPP 0x80 // Continuous Transmit or Carrier Suppression -#define BBP22_TXCARR 0xc1 // Transmit Carrier -#define BBP24_TXCONT 0x00 // Continuous Transmit -#define BBP24_CARRSUPP 0x01 // Carrier Suppression -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // // WEP Key TYPE #define WEP_HEXADECIMAL_TYPE 0 diff --git a/drivers/staging/rt3070/sta/connect.c b/drivers/staging/rt3070/sta/connect.c index 152c0bd0f822..00f8af134990 100644 --- a/drivers/staging/rt3070/sta/connect.c +++ b/drivers/staging/rt3070/sta/connect.c @@ -266,13 +266,6 @@ VOID CntlIdleProc( break; case OID_802_11_DISASSOCIATE: -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC; @@ -315,13 +308,6 @@ VOID CntlOidScanProc( ULONG BssIdx = BSS_NOT_FOUND; BSS_ENTRY CurrBss; -#ifdef RALINK_ATE -/* Disable scanning when ATE is running. */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - // record current BSS if network is connected. // 2003-2-13 do not include current IBSS if this is the only STA in this IBSS. if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) @@ -541,12 +527,6 @@ VOID CntlOidRTBssidProc( MLME_DISASSOC_REQ_STRUCT DisassocReq; MLME_JOIN_REQ_STRUCT JoinReq; -#ifdef RALINK_ATE -/* No need to perform this routine when ATE is running. */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - // record user desired settings COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid); pAd->MlmeAux.BssType = pAd->StaCfg.BssType; @@ -2035,12 +2015,6 @@ VOID LinkDown( if (MONITOR_ON(pAd)) return; -#ifdef RALINK_ATE - // Nothing to do in ATE mode. - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - if (pAd->CommonCfg.bWirelessEvent) { RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); diff --git a/drivers/staging/rt3070/sta/rtmp_data.c b/drivers/staging/rt3070/sta/rtmp_data.c index b0f259b35c74..014469a9af8e 100644 --- a/drivers/staging/rt3070/sta/rtmp_data.c +++ b/drivers/staging/rt3070/sta/rtmp_data.c @@ -771,22 +771,6 @@ BOOLEAN STARxDoneInterruptHandle( break; } /* RT2870 invokes STARxDoneInterruptHandle() in rtusb_bulk.c */ -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - pAd->ate.RxCntPerSec++; - ATESampleRssi(pAd, pRxWI); -#ifdef RALINK_28xx_QA - if (pAd->ate.bQARxStart == TRUE) - { - /* (*pRxD) has been swapped in GetPacketFromRxRing() */ - ATE_QA_Statistics(pAd, pRxWI, pRxD, pHeader); - } -#endif // RALINK_28xx_QA // - RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_SUCCESS); - continue; - } -#endif // RALINK_ATE // // Check for all RxD errors Status = RTMPCheckRxError(pAd, pHeader, pRxWI, pRxD); @@ -1314,14 +1298,6 @@ VOID RTMPSendNullFrame( ULONG Length; PHEADER_802_11 pHeader_802_11; - -#ifdef RALINK_ATE - if(ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - // WPA 802.1x secured port control if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) || diff --git a/drivers/staging/rt3070/sta/sync.c b/drivers/staging/rt3070/sta/sync.c index 2b5b3b07661d..12b50c533443 100644 --- a/drivers/staging/rt3070/sta/sync.c +++ b/drivers/staging/rt3070/sta/sync.c @@ -973,14 +973,6 @@ VOID PeerBeacon( UCHAR AddHtInfoLen; UCHAR NewExtChannelOffset = 0xff; - -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - if (!(INFRA_ON(pAd) || ADHOC_ON(pAd) )) return; @@ -1615,14 +1607,6 @@ VOID InvalidStateWhenStart( VOID EnqueuePsPoll( IN PRTMP_ADAPTER pAd) { -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - return; - } -#endif // RALINK_ATE // - - if (pAd->StaCfg.WindowsPowerMode == Ndis802_11PowerModeLegacy_PSP) pAd->PsPollFrame.FC.PwrMgmt = PWR_SAVE; MiniportMMRequest(pAd, 0, (PUCHAR)&pAd->PsPollFrame, sizeof(PSPOLL_FRAME)); diff --git a/drivers/staging/rt3070/sta_ioctl.c b/drivers/staging/rt3070/sta_ioctl.c index 68769993ab75..2bfa206c98ba 100644 --- a/drivers/staging/rt3070/sta_ioctl.c +++ b/drivers/staging/rt3070/sta_ioctl.c @@ -284,40 +284,6 @@ static struct { {"Debug", Set_Debug_Proc}, #endif -#ifdef RALINK_ATE - {"ATE", Set_ATE_Proc}, - {"ATEDA", Set_ATE_DA_Proc}, - {"ATESA", Set_ATE_SA_Proc}, - {"ATEBSSID", Set_ATE_BSSID_Proc}, - {"ATECHANNEL", Set_ATE_CHANNEL_Proc}, - {"ATETXPOW0", Set_ATE_TX_POWER0_Proc}, - {"ATETXPOW1", Set_ATE_TX_POWER1_Proc}, - {"ATETXANT", Set_ATE_TX_Antenna_Proc}, - {"ATERXANT", Set_ATE_RX_Antenna_Proc}, - {"ATETXFREQOFFSET", Set_ATE_TX_FREQOFFSET_Proc}, - {"ATETXBW", Set_ATE_TX_BW_Proc}, - {"ATETXLEN", Set_ATE_TX_LENGTH_Proc}, - {"ATETXCNT", Set_ATE_TX_COUNT_Proc}, - {"ATETXMCS", Set_ATE_TX_MCS_Proc}, - {"ATETXMODE", Set_ATE_TX_MODE_Proc}, - {"ATETXGI", Set_ATE_TX_GI_Proc}, - {"ATERXFER", Set_ATE_RX_FER_Proc}, - {"ATERRF", Set_ATE_Read_RF_Proc}, - {"ATEWRF1", Set_ATE_Write_RF1_Proc}, - {"ATEWRF2", Set_ATE_Write_RF2_Proc}, - {"ATEWRF3", Set_ATE_Write_RF3_Proc}, - {"ATEWRF4", Set_ATE_Write_RF4_Proc}, - {"ATELDE2P", Set_ATE_Load_E2P_Proc}, - {"ATERE2P", Set_ATE_Read_E2P_Proc}, - {"ATESHOW", Set_ATE_Show_Proc}, - {"ATEHELP", Set_ATE_Help_Proc}, - -#ifdef RALINK_28xx_QA - {"TxStop", Set_TxStop_Proc}, - {"RxStop", Set_RxStop_Proc}, -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - #ifdef WPA_SUPPLICANT_SUPPORT {"WpaSupport", Set_Wpa_Support}, #endif // WPA_SUPPLICANT_SUPPORT // @@ -1881,14 +1847,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, memset(extra, 0x00, IW_PRIV_SIZE_MASK); sprintf(extra, "\n\n"); -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->ate.TxDoneCount); - //sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->ate.TxDoneCount); - } - else -#endif // RALINK_ATE // { sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart); sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart); @@ -1904,22 +1862,6 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, sprintf(extra+strlen(extra), "Rx duplicate frame = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart); sprintf(extra+strlen(extra), "False CCA (one second) = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt); -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - { - if (pAd->ate.RxAntennaSel == 0) - { - sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta)); - sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->ate.LastRssi1 - pAd->BbpRssiToDbmDelta)); - sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->ate.LastRssi2 - pAd->BbpRssiToDbmDelta)); - } - else - { - sprintf(extra+strlen(extra), "RSSI = %ld\n", (LONG)(pAd->ate.LastRssi0 - pAd->BbpRssiToDbmDelta)); - } - } - else -#endif // RALINK_ATE // { sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta)); sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta)); @@ -2821,13 +2763,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info, if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control #endif // RT30xx // { -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // { RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); } @@ -2858,15 +2793,6 @@ rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info, if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control #endif // RT30xx // { -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue); - //Read it back for showing - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue); //Read it back for showing @@ -2906,13 +2832,6 @@ next: { if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10)) break; -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - else -#endif // RALINK_ATE // RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); /* sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP); @@ -3244,13 +3163,6 @@ INT RTMPSetInformation( } break; case OID_802_11_BSSID_LIST_SCAN: - #ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // Now = jiffies; DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount)); @@ -3352,13 +3264,6 @@ INT RTMPSetInformation( } break; case OID_802_11_BSSID: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS)) Status = -EINVAL; else @@ -3984,13 +3889,6 @@ INT RTMPSetInformation( break; case OID_802_11_DISASSOCIATE: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - break; - } -#endif // RALINK_ATE // // // Set NdisRadioStateOff to TRUE, instead of called MlmeRadioOff. // Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be 0 @@ -4556,16 +4454,6 @@ INT RTMPQueryInformation( Status = -EFAULT; } break; -#ifdef RALINK_ATE - case RT_QUERY_ATE_TXDONE_COUNT: - DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_QUERY_ATE_TXDONE_COUNT \n")); - wrq->u.data.length = sizeof(UINT32); - if (copy_to_user(wrq->u.data.pointer, &pAdapter->ate.TxDoneCount, wrq->u.data.length)) - { - Status = -EFAULT; - } - break; -#endif // RALINK_ATE // case OID_802_11_BSSID_LIST: if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) { @@ -4707,14 +4595,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length); break; case OID_802_11_BSSID: -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n")); - Status = NDIS_STATUS_RESOURCES; - break; - } -#endif // RALINK_ATE // if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter)) { Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS)); @@ -5419,15 +5299,6 @@ INT rt28xx_sta_ioctl( switch(cmd) { -#ifdef RALINK_ATE -#ifdef RALINK_28xx_QA - case RTPRIV_IOCTL_ATE: - { - RtmpDoAte(pAd, wrq); - } - break; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // case SIOCGIFHWADDR: DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n")); memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN); @@ -6659,13 +6530,6 @@ VOID RTMPIoctlMAC( UCHAR R66; pAdapter->BbpTuning.bEnable = FALSE; R66 = 0x26 + GET_LNA_GAIN(pAdapter); -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter))); - } - else -#endif // RALINK_ATE // RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter))); DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66)); } @@ -6984,13 +6848,6 @@ VOID RTMPIoctlRF( // In RT2860 ATE mode, we do not load 8051 firmware. //We must access RF directly. // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined. -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF); - } - else -#endif // RALINK_ATE // // according to Andy, Gary, David require. // the command rf shall read rf register directly for dubug. // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); @@ -7019,17 +6876,6 @@ VOID RTMPIoctlRF( // In RT2860 ATE mode, we do not load 8051 firmware. // We should access RF registers directly. // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined. -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF); - ATE_RF_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)rfId,(UCHAR) rfValue); - //Read it back for showing - ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF); - sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF); - } - else -#endif // RALINK_ATE // { // according to Andy, Gary, David require. // the command RF shall read/write RF register directly for dubug. @@ -7063,17 +6909,6 @@ next: sprintf(msg, "\n"); for (rfId = 0; rfId <= 31; rfId++) { - // In RT2860 ATE mode, we do not load 8051 firmware. - // We should access RF registers directly. - // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined. -#ifdef RALINK_ATE - if (ATE_ON(pAdapter)) - { - ATE_RF_IO_READ8_BY_REG_ID(pAdapter, rfId, ®RF); - } - else -#endif // RALINK_ATE // - // according to Andy, Gary, David require. // the command RF shall read/write RF register directly for dubug. RT30xxReadRFRegister(pAdapter, rfId, ®RF); -- 2.20.1