From 9982f59450930138eb0bf9a4ebf865e8c06ba705 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 23 Sep 2009 17:23:07 +0530 Subject: [PATCH] [SCSI] mpt2sas: Add support in the driver to check for valid response info Add support in the driver to check for valid response info in the scsi state, then check to see if the response code is MPI2_SCSITASKMGMT_RSP_INVALID_FRAME; when this condition occurrs, the driver will return DID_SOFT_ERROR. A return code of DID_SOFT_ERROR will result in a retry at the scsi-mid layer level. An additional change added to obtain the response code from the 1st byte of the response info instead of last. Signed-off-by: Kashyap Desai Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index d4e890d8b99..efb6270cf26 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3111,7 +3111,7 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { response_info = le32_to_cpu(mpi_reply->ResponseInfo); response_bytes = (u8 *)&response_info; - _scsih_response_code(ioc, response_bytes[3]); + _scsih_response_code(ioc, response_bytes[0]); } } #endif @@ -3229,7 +3229,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) u8 scsi_status; u32 log_info; struct MPT2SAS_DEVICE *sas_device_priv_data; - u32 response_code; + u32 response_code = 0; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); scmd = _scsih_scsi_lookup_get(ioc, smid); @@ -3251,16 +3251,16 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) } /* turning off TLR */ + scsi_state = mpi_reply->SCSIState; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + response_code = + le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; if (!sas_device_priv_data->tlr_snoop_check) { sas_device_priv_data->tlr_snoop_check++; - if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) { - response_code = (le32_to_cpu(mpi_reply->ResponseInfo) - >> 24); - if (response_code == - MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) - sas_device_priv_data->flags &= - ~MPT_DEVICE_TLR_ON; - } + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && + response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) + sas_device_priv_data->flags &= + ~MPT_DEVICE_TLR_ON; } xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); @@ -3271,7 +3271,6 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) else log_info = 0; ioc_status &= MPI2_IOCSTATUS_MASK; - scsi_state = mpi_reply->SCSIState; scsi_status = mpi_reply->SCSIStatus; if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && @@ -3356,8 +3355,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: case MPI2_IOCSTATUS_SUCCESS: scmd->result = (DID_OK << 16) | scsi_status; - if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | - MPI2_SCSI_STATE_NO_SCSI_STATUS)) + if (response_code == + MPI2_SCSITASKMGMT_RSP_INVALID_FRAME || + (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS))) scmd->result = DID_SOFT_ERROR << 16; else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) scmd->result = DID_RESET << 16; -- 2.20.1