From 993da8f9ea7e00d21af49d0e14a131183288bcf8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 1 Feb 2008 23:09:30 +0100 Subject: [PATCH] amd74xx: remove amd_ide_chips table * Remove no longer needed assertion from amd74xx_probe(). * Factor out cable detection for AMD7409 to amd7409_cable_detect() and for chipsets >= AMD7411 to amd7411_cable_detect(). * Use dev->vendor and dev->device instead of amd_config->udma_mask when selecting cable detection method and checking for broken FIFO support in init_chipset_amd74xx(). * Remove no longer needed AMD_BAD_FIFO define. * Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro. * Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro. * Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe() in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask on Serenade mainboards. * Remove no longer needed fixups from init_chipset_amd74xx() and AMD_CHECK_{SWDMA,SERENADE} defines. * Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(), also remove incorrect comment while at it. * Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive(). * Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from amd_set_drive() instead of using amd_config->udma_mask. * Move amd_config->base from AMD_* defines to users of these defines and add 0x40 the defined values. Then add amd_offset() inline helper for selecting offset from 0x40 base (needed for nVidia controllers) and finally use it in amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead of amd_config->base. * Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips table. * Fix init_chipset_amd74xx() comment. * Bump driver version. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/amd74xx.c | 275 +++++++++++++++++--------------------- 1 file changed, 124 insertions(+), 151 deletions(-) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index cee51fdafcf6..13c9f67969cd 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -1,5 +1,5 @@ /* - * Version 2.24 + * Version 2.25 * * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04 * IDE driver for Linux. @@ -28,81 +28,46 @@ #include "ide-timing.h" -#define AMD_IDE_CONFIG (0x01 + amd_config->base) -#define AMD_CABLE_DETECT (0x02 + amd_config->base) -#define AMD_DRIVE_TIMING (0x08 + amd_config->base) -#define AMD_8BIT_TIMING (0x0e + amd_config->base) -#define AMD_ADDRESS_SETUP (0x0c + amd_config->base) -#define AMD_UDMA_TIMING (0x10 + amd_config->base) - -#define AMD_CHECK_SWDMA 0x08 -#define AMD_BAD_SWDMA 0x10 -#define AMD_BAD_FIFO 0x20 -#define AMD_CHECK_SERENADE 0x40 - -/* - * AMD SouthBridge chips. - */ - -static struct amd_ide_chip { - unsigned short id; - u8 base; - u8 udma_mask; - u8 flags; -} amd_ide_chips[] = { - { PCI_DEVICE_ID_AMD_COBRA_7401, 0x40, ATA_UDMA2, AMD_BAD_SWDMA }, - { PCI_DEVICE_ID_AMD_VIPER_7409, 0x40, ATA_UDMA4, AMD_CHECK_SWDMA }, - { PCI_DEVICE_ID_AMD_VIPER_7411, 0x40, ATA_UDMA5, AMD_BAD_FIFO }, - { PCI_DEVICE_ID_AMD_OPUS_7441, 0x40, ATA_UDMA5, }, - { PCI_DEVICE_ID_AMD_8111_IDE, 0x40, ATA_UDMA6, AMD_CHECK_SERENADE }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x50, ATA_UDMA5, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, }, - { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, ATA_UDMA5, }, - { 0 } +enum { + AMD_IDE_CONFIG = 0x41, + AMD_CABLE_DETECT = 0x42, + AMD_DRIVE_TIMING = 0x48, + AMD_8BIT_TIMING = 0x4e, + AMD_ADDRESS_SETUP = 0x4c, + AMD_UDMA_TIMING = 0x50, }; -static struct amd_ide_chip *amd_config; -static const struct ide_port_info *amd_chipset; static unsigned int amd_80w; static unsigned int amd_clock; static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 }; +static inline u8 amd_offset(struct pci_dev *dev) +{ + return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0; +} + /* * amd_set_speed() writes timing values to the chipset registers */ -static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timing *timing) +static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, + struct ide_timing *timing) { - unsigned char t; + u8 t = 0, offset = amd_offset(dev); - pci_read_config_byte(dev, AMD_ADDRESS_SETUP, &t); + pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); - pci_write_config_byte(dev, AMD_ADDRESS_SETUP, t); + pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); - pci_write_config_byte(dev, AMD_8BIT_TIMING + (1 - (dn >> 1)), + pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); - pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn), + pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); - switch (amd_config->udma_mask) { + switch (udma_mask) { case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; @@ -110,7 +75,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi default: return; } - pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t); + pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); } /* @@ -120,12 +85,14 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi static void amd_set_drive(ide_drive_t *drive, const u8 speed) { - ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *peer = hwif->drives + (~drive->dn & 1); struct ide_timing t, p; int T, UT; + u8 udma_mask = hwif->ultra_mask; T = 1000000000 / amd_clock; - UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2); + UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); ide_timing_compute(drive, speed, &t, T, UT); @@ -137,7 +104,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1; if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15; - amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + amd_set_speed(hwif->pci_dev, drive->dn, udma_mask, &t); } /* @@ -149,67 +116,68 @@ static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) amd_set_drive(drive, XFER_PIO_0 + pio); } -/* - * The initialization callback. Here we determine the IDE chip type - * and initialize its drive independent registers. - */ +static void __devinit amd7409_cable_detect(struct pci_dev *dev, + const char *name) +{ + /* no host side cable detection */ + amd_80w = 0x03; +} -static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const char *name) +static void __devinit amd7411_cable_detect(struct pci_dev *dev, + const char *name) { - unsigned char t; - unsigned int u; int i; + u32 u = 0; + u8 t = 0, offset = amd_offset(dev); + + pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t); + pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u); + amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { + printk(KERN_WARNING "%s: BIOS didn't set cable bits " + "correctly. Enabling workaround.\n", + name); + amd_80w |= (1 << (1 - (i >> 4))); + } +} /* - * Check for bad SWDMA. + * The initialization callback. Initialize drive independent registers. */ - if (amd_config->flags & AMD_CHECK_SWDMA) { - if (dev->revision <= 7) - amd_config->flags |= AMD_BAD_SWDMA; - } +static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, + const char *name) +{ + u8 t = 0, offset = amd_offset(dev); /* * Check 80-wire cable presence. */ - switch (amd_config->udma_mask) { - - case ATA_UDMA6: - case ATA_UDMA5: - pci_read_config_byte(dev, AMD_CABLE_DETECT, &t); - pci_read_config_dword(dev, AMD_UDMA_TIMING, &u); - amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) { - printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n", - amd_chipset->name); - amd_80w |= (1 << (1 - (i >> 4))); - } - break; - - case ATA_UDMA4: - /* no host side cable detection */ - amd_80w = 0x03; - break; - } + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_COBRA_7401) + ; /* no UDMA > 2 */ + else if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_VIPER_7409) + amd7409_cable_detect(dev, name); + else + amd7411_cable_detect(dev, name); /* * Take care of prefetch & postwrite. */ - pci_read_config_byte(dev, AMD_IDE_CONFIG, &t); - pci_write_config_byte(dev, AMD_IDE_CONFIG, - (amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0)); - -/* - * Take care of incorrectly wired Serenade mainboards. - */ - - if ((amd_config->flags & AMD_CHECK_SERENADE) && - dev->subsystem_vendor == PCI_VENDOR_ID_AMD && - dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) - amd_config->udma_mask = ATA_UDMA5; + pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t); + /* + * Check for broken FIFO support. + */ + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411) + t &= 0x0f; + else + t |= 0xf0; + pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t); /* * Determine the system bus clock. @@ -225,18 +193,10 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch if (amd_clock < 20000 || amd_clock > 50000) { printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", - amd_chipset->name, amd_clock); + name, amd_clock); amd_clock = 33333; } -/* - * Print the boot message. - */ - - printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", - amd_chipset->name, pci_name(dev), dev->revision, - amd_dma[fls(amd_config->udma_mask) - 1]); - return dev->irq; } @@ -251,10 +211,6 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) if (!hwif->dma_base) return; - hwif->ultra_mask = amd_config->udma_mask; - if (amd_config->flags & AMD_BAD_SWDMA) - hwif->swdma_mask = 0x00; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { if ((amd_80w >> hwif->channel) & 1) hwif->cbl = ATA_CBL_PATA80; @@ -272,7 +228,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) IDE_HFLAG_UNMASK_IRQS | \ IDE_HFLAG_BOOTABLE) -#define DECLARE_AMD_DEV(name_str) \ +#define DECLARE_AMD_DEV(name_str, swdma, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_amd74xx, \ @@ -280,11 +236,12 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ - .swdma_mask = ATA_SWDMA2, \ + .swdma_mask = swdma, \ .mwdma_mask = ATA_MWDMA2, \ + .udma_mask = udma, \ } -#define DECLARE_NV_DEV(name_str) \ +#define DECLARE_NV_DEV(name_str, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_amd74xx, \ @@ -294,45 +251,61 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .pio_mask = ATA_PIO5, \ .swdma_mask = ATA_SWDMA2, \ .mwdma_mask = ATA_MWDMA2, \ + .udma_mask = udma, \ } static const struct ide_port_info amd74xx_chipsets[] __devinitdata = { - /* 0 */ DECLARE_AMD_DEV("AMD7401"), - /* 1 */ DECLARE_AMD_DEV("AMD7409"), - /* 2 */ DECLARE_AMD_DEV("AMD7411"), - /* 3 */ DECLARE_AMD_DEV("AMD7441"), - /* 4 */ DECLARE_AMD_DEV("AMD8111"), - - /* 5 */ DECLARE_NV_DEV("NFORCE"), - /* 6 */ DECLARE_NV_DEV("NFORCE2"), - /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R"), - /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA"), - /* 9 */ DECLARE_NV_DEV("NFORCE3-150"), - /* 10 */ DECLARE_NV_DEV("NFORCE3-250"), - /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA"), - /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"), - /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"), - /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), - /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), - /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), - /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), - /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"), - /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"), - /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73"), - /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77"), - /* 22 */ DECLARE_AMD_DEV("AMD5536"), + /* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2), + /* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4), + /* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5), + /* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5), + /* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6), + + /* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5), + /* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6), + /* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6), + /* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6), + /* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6), + /* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6), + /* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6), + /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6), + /* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6), + /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6), + /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6), + /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6), + /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6), + /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6), + /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6), + /* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6), + /* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6), + + /* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) { - amd_chipset = amd74xx_chipsets + id->driver_data; - amd_config = amd_ide_chips + id->driver_data; - if (dev->device != amd_config->id) { - printk(KERN_ERR "%s: assertion 0x%02x == 0x%02x failed !\n", - pci_name(dev), dev->device, amd_config->id); - return -ENODEV; + struct ide_port_info d; + u8 idx = id->driver_data; + + d = amd74xx_chipsets[idx]; + + /* + * Check for bad SWDMA and incorrectly wired Serenade mainboards. + */ + if (idx == 1) { + if (dev->revision <= 7) + d.swdma_mask = 0; + } else if (idx == 4) { + if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD && + dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + d.udma_mask = ATA_UDMA5; } - return ide_setup_pci_device(dev, amd_chipset); + + printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n", + d.name, pci_name(dev), dev->revision, + amd_dma[fls(d.udma_mask) - 1]); + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id amd74xx_pci_tbl[] = { -- 2.20.1