From 991f0c0e33e2a57120970d28c08384c77505bfca Mon Sep 17 00:00:00 2001 From: Dick Kennedy Date: Wed, 23 Aug 2017 16:55:39 -0700 Subject: [PATCH] scsi: lpfc: Fix NVME PRLI handling during RSCN A race condition was found whereby the initiator would receive the RSCN for a new NVME device before it had a chance to register its FC4 support with the fabric. Thus, when queried by the initiator, it would see that the target supported FC-NVME. Corrected by making the assumption that the target always supports FC-NVME thus a PRLI is sent. It's ok for the target to reject it. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index ffbd3eddeabb..6de470e158ef 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -2177,6 +2177,16 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint16_t cmdsize; u32 local_nlp_type, elscmd; + /* + * If we are in RSCN mode, the FC4 types supported from a + * previous GFT_ID command may not be accurate. So, if we + * are a NVME Initiator, always look for the possibility of + * the remote NPort beng a NVME Target. + */ + if (phba->sli_rev == LPFC_SLI_REV4 && + vport->fc_flag & FC_RSCN_MODE && + vport->nvmei_support) + ndlp->nlp_fc4_type |= NLP_FC4_NVME; local_nlp_type = ndlp->nlp_fc4_type; send_next_prli: -- 2.20.1