From 987008dbc48479af250cddda7f36e920a47ef54f Mon Sep 17 00:00:00 2001 From: Sifan Naeem Date: Thu, 10 Sep 2015 15:50:04 +0100 Subject: [PATCH] i2c: img-scb: fix LOW and HIGH period values for the SCL clock Currently, after determining the minimum value for the High period (TCKH) the remainder of the internal clock pulses is set as the Low period (TCKL). This causes the i2c clock duty cycle to be much less than 50%. Modify the starting position to TCKH and TCKL at 50% of the internal clock, and adjusts the TCKH and TCKL values from there should the minimum value for TCKL not be met. This results in duty cycles closer to 50%. Fixes: commit 27bce457d588 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem Acked-by: James Hogan Reviewed-by: James Hartley Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-img-scb.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index b4f59e1a5cac..e4daebcdf824 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -1178,25 +1178,29 @@ static int img_i2c_init(struct img_i2c *i2c) ((bitrate_khz * clk_period) / 2)) int_bitrate++; - /* Setup TCKH value */ - tckh = DIV_ROUND_UP(timing.tckh, clk_period); + /* + * Setup clock duty cycle, start with 50% and adjust TCKH and TCKL + * values from there if they don't meet minimum timing requirements + */ + tckh = int_bitrate / 2; + tckl = int_bitrate - tckh; - if (tckh > 0) - data = tckh - 1; - else - data = 0; + /* Adjust TCKH and TCKL values */ + data = DIV_ROUND_UP(timing.tckl, clk_period); - img_i2c_writel(i2c, SCB_TIME_TCKH_REG, data); + if (tckl < data) { + tckl = data; + tckh = int_bitrate - tckl; + } - /* Setup TCKL value */ - tckl = int_bitrate - tckh; + if (tckh > 0) + --tckh; if (tckl > 0) - data = tckl - 1; - else - data = 0; + --tckl; - img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data); + img_i2c_writel(i2c, SCB_TIME_TCKH_REG, tckh); + img_i2c_writel(i2c, SCB_TIME_TCKL_REG, tckl); /* Setup TSDH value */ tsdh = DIV_ROUND_UP(timing.tsdh, clk_period); -- 2.20.1