From 9750a3ade7b635a18f04371b4fddad0de0b4e6d8 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 29 Oct 2012 08:45:15 +0000 Subject: [PATCH] cpsw: support both silicon versions This patch fixes the cpsw driver to operate correctly with both the dm814x and the am335x versions of the switch hardware. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- .../devicetree/bindings/net/cpsw.txt | 8 +- drivers/net/ethernet/ti/cpsw.c | 106 +++++++++++++++--- 2 files changed, 94 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index dcaabe9fe869..3af47b78caea 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -59,14 +59,14 @@ Examples: mac_control = <0x20>; slaves = <2>; cpsw_emac0: slave@0 { - slave_reg_ofs = <0x208>; + slave_reg_ofs = <0x200>; sliver_reg_ofs = <0xd80>; phy_id = "davinci_mdio.16:00"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; cpsw_emac1: slave@1 { - slave_reg_ofs = <0x308>; + slave_reg_ofs = <0x300>; sliver_reg_ofs = <0xdc0>; phy_id = "davinci_mdio.16:01"; /* Filled in by U-Boot */ @@ -93,14 +93,14 @@ Examples: mac_control = <0x20>; slaves = <2>; cpsw_emac0: slave@0 { - slave_reg_ofs = <0x208>; + slave_reg_ofs = <0x200>; sliver_reg_ofs = <0xd80>; phy_id = "davinci_mdio.16:00"; /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; cpsw_emac1: slave@1 { - slave_reg_ofs = <0x308>; + slave_reg_ofs = <0x300>; sliver_reg_ofs = <0xdc0>; phy_id = "davinci_mdio.16:01"; /* Filled in by U-Boot */ diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 5c427cf1ef87..588f5c340490 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -160,18 +160,74 @@ struct cpsw_ss_regs { u32 dlr_ltype; }; -struct cpsw_slave_regs { - u32 max_blks; - u32 blk_cnt; - u32 flow_thresh; - u32 port_vlan; - u32 tx_pri_map; - u32 ts_ctl; - u32 ts_seq_ltype; - u32 ts_vlan; - u32 sa_lo; - u32 sa_hi; -}; +/* CPSW_PORT_V1 */ +#define CPSW1_MAX_BLKS 0x00 /* Maximum FIFO Blocks */ +#define CPSW1_BLK_CNT 0x04 /* FIFO Block Usage Count (Read Only) */ +#define CPSW1_TX_IN_CTL 0x08 /* Transmit FIFO Control */ +#define CPSW1_PORT_VLAN 0x0c /* VLAN Register */ +#define CPSW1_TX_PRI_MAP 0x10 /* Tx Header Priority to Switch Pri Mapping */ +#define CPSW1_TS_CTL 0x14 /* Time Sync Control */ +#define CPSW1_TS_SEQ_LTYPE 0x18 /* Time Sync Sequence ID Offset and Msg Type */ +#define CPSW1_TS_VLAN 0x1c /* Time Sync VLAN1 and VLAN2 */ + +/* CPSW_PORT_V2 */ +#define CPSW2_CONTROL 0x00 /* Control Register */ +#define CPSW2_MAX_BLKS 0x08 /* Maximum FIFO Blocks */ +#define CPSW2_BLK_CNT 0x0c /* FIFO Block Usage Count (Read Only) */ +#define CPSW2_TX_IN_CTL 0x10 /* Transmit FIFO Control */ +#define CPSW2_PORT_VLAN 0x14 /* VLAN Register */ +#define CPSW2_TX_PRI_MAP 0x18 /* Tx Header Priority to Switch Pri Mapping */ +#define CPSW2_TS_SEQ_MTYPE 0x1c /* Time Sync Sequence ID Offset and Msg Type */ + +/* CPSW_PORT_V1 and V2 */ +#define SA_LO 0x20 /* CPGMAC_SL Source Address Low */ +#define SA_HI 0x24 /* CPGMAC_SL Source Address High */ +#define SEND_PERCENT 0x28 /* Transmit Queue Send Percentages */ + +/* CPSW_PORT_V2 only */ +#define RX_DSCP_PRI_MAP0 0x30 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP1 0x34 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP2 0x38 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP3 0x3c /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP4 0x40 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP5 0x44 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP6 0x48 /* Rx DSCP Priority to Rx Packet Mapping */ +#define RX_DSCP_PRI_MAP7 0x4c /* Rx DSCP Priority to Rx Packet Mapping */ + +/* Bit definitions for the CPSW2_CONTROL register */ +#define PASS_PRI_TAGGED (1<<24) /* Pass Priority Tagged */ +#define VLAN_LTYPE2_EN (1<<21) /* VLAN LTYPE 2 enable */ +#define VLAN_LTYPE1_EN (1<<20) /* VLAN LTYPE 1 enable */ +#define DSCP_PRI_EN (1<<16) /* DSCP Priority Enable */ +#define TS_320 (1<<14) /* Time Sync Dest Port 320 enable */ +#define TS_319 (1<<13) /* Time Sync Dest Port 319 enable */ +#define TS_132 (1<<12) /* Time Sync Dest IP Addr 132 enable */ +#define TS_131 (1<<11) /* Time Sync Dest IP Addr 131 enable */ +#define TS_130 (1<<10) /* Time Sync Dest IP Addr 130 enable */ +#define TS_129 (1<<9) /* Time Sync Dest IP Addr 129 enable */ +#define TS_BIT8 (1<<8) /* ts_ttl_nonzero? */ +#define TS_ANNEX_D_EN (1<<4) /* Time Sync Annex D enable */ +#define TS_LTYPE2_EN (1<<3) /* Time Sync LTYPE 2 enable */ +#define TS_LTYPE1_EN (1<<2) /* Time Sync LTYPE 1 enable */ +#define TS_TX_EN (1<<1) /* Time Sync Transmit Enable */ +#define TS_RX_EN (1<<0) /* Time Sync Receive Enable */ + +#define CTRL_TS_BITS \ + (TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 | TS_BIT8 | \ + TS_ANNEX_D_EN | TS_LTYPE1_EN) + +#define CTRL_ALL_TS_MASK (CTRL_TS_BITS | TS_TX_EN | TS_RX_EN) +#define CTRL_TX_TS_BITS (CTRL_TS_BITS | TS_TX_EN) +#define CTRL_RX_TS_BITS (CTRL_TS_BITS | TS_RX_EN) + +/* Bit definitions for the CPSW2_TS_SEQ_MTYPE register */ +#define TS_SEQ_ID_OFFSET_SHIFT (16) /* Time Sync Sequence ID Offset */ +#define TS_SEQ_ID_OFFSET_MASK (0x3f) +#define TS_MSG_TYPE_EN_SHIFT (0) /* Time Sync Message Type Enable */ +#define TS_MSG_TYPE_EN_MASK (0xffff) + +/* The PTP event messages - Sync, Delay_Req, Pdelay_Req, and Pdelay_Resp. */ +#define EVENT_MSG_BITS ((1<<0) | (1<<1) | (1<<2) | (1<<3)) struct cpsw_host_regs { u32 max_blks; @@ -197,7 +253,7 @@ struct cpsw_sliver_regs { }; struct cpsw_slave { - struct cpsw_slave_regs __iomem *regs; + void __iomem *regs; struct cpsw_sliver_regs __iomem *sliver; int slave_num; u32 mac_control; @@ -205,6 +261,16 @@ struct cpsw_slave { struct phy_device *phy; }; +static inline u32 slave_read(struct cpsw_slave *slave, u32 offset) +{ + return __raw_readl(slave->regs + offset); +} + +static inline void slave_write(struct cpsw_slave *slave, u32 val, u32 offset) +{ + __raw_writel(val, slave->regs + offset); +} + struct cpsw_priv { spinlock_t lock; struct platform_device *pdev; @@ -396,8 +462,8 @@ static inline void soft_reset(const char *module, void __iomem *reg) static void cpsw_set_slave_mac(struct cpsw_slave *slave, struct cpsw_priv *priv) { - __raw_writel(mac_hi(priv->mac_addr), &slave->regs->sa_hi); - __raw_writel(mac_lo(priv->mac_addr), &slave->regs->sa_lo); + slave_write(slave, mac_hi(priv->mac_addr), SA_HI); + slave_write(slave, mac_lo(priv->mac_addr), SA_LO); } static void _cpsw_adjust_link(struct cpsw_slave *slave, @@ -483,7 +549,15 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) /* setup priority mapping */ __raw_writel(RX_PRIORITY_MAPPING, &slave->sliver->rx_pri_map); - __raw_writel(TX_PRIORITY_MAPPING, &slave->regs->tx_pri_map); + + switch (priv->version) { + case CPSW_VERSION_1: + slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP); + break; + case CPSW_VERSION_2: + slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP); + break; + } /* setup max packet size, and mac address */ __raw_writel(priv->rx_packet_max, &slave->sliver->rx_maxlen); -- 2.20.1