From 96f7077f671254e957a2815e54bb20e8d50f0bbc Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 17 Apr 2013 20:16:15 -0400 Subject: [PATCH] [SCSI] lpfc 8.3.39: Fix driver issues with large s/g lists for BlockGuard Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 7 +- drivers/scsi/lpfc/lpfc_attr.c | 15 ++- drivers/scsi/lpfc/lpfc_init.c | 130 +++++++++++++------ drivers/scsi/lpfc/lpfc_mem.c | 14 ++- drivers/scsi/lpfc/lpfc_scsi.c | 229 +++++++++++++++++++++------------- drivers/scsi/lpfc/lpfc_sli4.h | 5 - 6 files changed, 264 insertions(+), 136 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 1f2f1f4530d..924ceaaf133 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -46,13 +46,15 @@ struct lpfc_sli2_slim; #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi cmnd for menlo needs nearly twice as for firmware downloads using bsg */ -#define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */ + +#define LPFC_MIN_SG_SLI4_BUF_SZ 0x800 /* based on LPFC_DEFAULT_SG_SEG_CNT */ +#define LPFC_MAX_SG_SLI4_SEG_CNT_DIF 128 /* sg element count per scsi cmnd */ +#define LPFC_MAX_SG_SEG_CNT_DIF 512 /* sg element count per scsi cmnd */ #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */ #define LPFC_MAX_SGL_SEG_CNT 512 /* SGL element count per scsi cmnd */ #define LPFC_MAX_BPL_SEG_CNT 4096 /* BPL element count per scsi cmnd */ #define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */ -#define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ #define LPFC_VNAME_LEN 100 /* vport symbolic name length */ @@ -710,6 +712,7 @@ struct lpfc_hba { uint32_t cfg_fcp_wq_count; uint32_t cfg_fcp_eq_count; uint32_t cfg_fcp_io_channel; + uint32_t cfg_total_seg_cnt; uint32_t cfg_sg_seg_cnt; uint32_t cfg_prot_sg_seg_cnt; uint32_t cfg_sg_dma_buf_size; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index ad5b0f94a98..3b10aa5745b 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4073,16 +4073,23 @@ MODULE_PARM_DESC(lpfc_delay_discovery, /* * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count - * This value can be set to values between 64 and 256. The default value is + * This value can be set to values between 64 and 4096. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). + * Because of the additional overhead involved in setting up T10-DIF, + * this parameter will be limited to 128 if BlockGuard is enabled under SLI4 + * and will be limited to 512 if BlockGuard is enabled under SLI3. */ LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count"); -LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_PROT_SG_SEG_CNT, - LPFC_DEFAULT_PROT_SG_SEG_CNT, LPFC_MAX_PROT_SG_SEG_CNT, - "Max Protection Scatter Gather Segment Count"); +/* + * This parameter will be depricated, the driver cannot limit the + * protection data s/g list. + */ +LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, + LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, + "Max Protection Scatter Gather Segment Count"); struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_bg_info, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b2227fc17c9..1874b327494 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4730,23 +4730,52 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) return -ENOMEM; /* - * Since the sg_tablesize is module parameter, the sg_dma_buf_size + * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size * used to create the sg_dma_buf_pool must be dynamically calculated. - * 2 segments are added since the IOCB needs a command and response bde. */ - phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + - sizeof(struct fcp_rsp) + - ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64)); + /* Initialize the host templates the configured values. */ + lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt; + lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt; + + /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */ if (phba->cfg_enable_bg) { - phba->cfg_sg_seg_cnt = LPFC_MAX_BPL_SEG_CNT; - phba->cfg_sg_dma_buf_size += - phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64); + /* + * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd, + * the FCP rsp, and a BDE for each. Sice we have no control + * over how many protection data segments the SCSI Layer + * will hand us (ie: there could be one for every block + * in the IO), we just allocate enough BDEs to accomidate + * our max amount and we need to limit lpfc_sg_seg_cnt to + * minimize the risk of running out. + */ + phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + + (LPFC_MAX_SG_SEG_CNT * sizeof(struct ulp_bde64)); + + if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF) + phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF; + + /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */ + phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT; + } else { + /* + * The scsi_buf for a regular I/O will hold the FCP cmnd, + * the FCP rsp, a BDE for each, and a BDE for up to + * cfg_sg_seg_cnt data segments. + */ + phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + + ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64)); + + /* Total BDEs in BPL for scsi_sg_list */ + phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2; } - /* Also reinitialize the host templates with new values. */ - lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt; - lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt; + lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP, + "9088 sg_tablesize:%d dmabuf_size:%d total_bde:%d\n", + phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size, + phba->cfg_total_seg_cnt); phba->max_vpi = LPFC_MAX_VPI; /* This will be set to correct value after config_port mbox */ @@ -4814,11 +4843,10 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) { struct lpfc_sli *psli; LPFC_MBOXQ_t *mboxq; - int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size; + int rc, i, hbq_count, max_buf_size; uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0}; struct lpfc_mqe *mqe; int longs; - int sges_per_segment; /* Before proceed, wait for POST done and device ready */ rc = lpfc_sli4_post_status_check(phba); @@ -4886,11 +4914,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) phba->fc_map[1] = LPFC_FCOE_FCF_MAP1; phba->fc_map[2] = LPFC_FCOE_FCF_MAP2; - /* With BlockGuard we can have multiple SGEs per Data Segemnt */ - sges_per_segment = 1; - if (phba->cfg_enable_bg) - sges_per_segment = 2; - /* * For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands * we will associate a new ring, for each FCP fastpath EQ/CQ/WQ tuple. @@ -4910,29 +4933,62 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) max_buf_size = (2 * SLI4_PAGE_SIZE); if (phba->cfg_sg_seg_cnt > LPFC_MAX_SGL_SEG_CNT - 2) phba->cfg_sg_seg_cnt = LPFC_MAX_SGL_SEG_CNT - 2; - max_buf_size += (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); /* - * Since the sg_tablesize is module parameter, the sg_dma_buf_size + * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size * used to create the sg_dma_buf_pool must be dynamically calculated. - * 2 segments are added since the IOCB needs a command and response bde. - * To insure that the scsi sgl does not cross a 4k page boundary only - * sgl sizes of must be a power of 2. */ - buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) + - (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) * - sizeof(struct sli4_sge))); - - for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE; - dma_buf_size < max_buf_size && buf_size > dma_buf_size; - dma_buf_size = dma_buf_size << 1) - ; - if (dma_buf_size == max_buf_size) - phba->cfg_sg_seg_cnt = (dma_buf_size - - sizeof(struct fcp_cmnd) - sizeof(struct fcp_rsp) - - (2 * sizeof(struct sli4_sge))) / - sizeof(struct sli4_sge); - phba->cfg_sg_dma_buf_size = dma_buf_size; + + if (phba->cfg_enable_bg) { + /* + * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd, + * the FCP rsp, and a SGE for each. Sice we have no control + * over how many protection data segments the SCSI Layer + * will hand us (ie: there could be one for every block + * in the IO), we just allocate enough SGEs to accomidate + * our max amount and we need to limit lpfc_sg_seg_cnt to + * minimize the risk of running out. + */ + phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + max_buf_size; + + /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */ + phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT; + + if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SLI4_SEG_CNT_DIF) + phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SLI4_SEG_CNT_DIF; + } else { + /* + * The scsi_buf for a regular I/O will hold the FCP cmnd, + * the FCP rsp, a SGE for each, and a SGE for up to + * cfg_sg_seg_cnt data segments. + */ + phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + + sizeof(struct fcp_rsp) + + ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)); + + /* Total SGEs for scsi_sg_list */ + phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2; + /* + * NOTE: if (phba->cfg_sg_seg_cnt + 2) <= 256 we only need + * to post 1 page for the SGL. + */ + } + + /* Initialize the host templates with the updated values. */ + lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt; + lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt; + + if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ) + phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ; + else + phba->cfg_sg_dma_buf_size = + SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size); + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP, + "9087 sg_tablesize:%d dmabuf_size:%d total_sge:%d\n", + phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size, + phba->cfg_total_seg_cnt); /* Initialize buffer queue management fields */ hbq_count = lpfc_sli_hbq_count(); diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index cd86069a0ba..812d0cd7c86 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -64,18 +64,26 @@ lpfc_mem_alloc(struct lpfc_hba *phba, int align) struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool; int i; - if (phba->sli_rev == LPFC_SLI_REV4) + if (phba->sli_rev == LPFC_SLI_REV4) { + /* Calculate alignment */ + if (phba->cfg_sg_dma_buf_size < SLI4_PAGE_SIZE) + i = phba->cfg_sg_dma_buf_size; + else + i = SLI4_PAGE_SIZE; + phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool", phba->pcidev, phba->cfg_sg_dma_buf_size, - phba->cfg_sg_dma_buf_size, + i, 0); - else + } else { phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool", phba->pcidev, phba->cfg_sg_dma_buf_size, align, 0); + } + if (!phba->lpfc_scsi_dma_buf_pool) goto fail; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index d096402ae4d..c79b4dc8aa4 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -536,7 +536,16 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl; uint16_t iotag; - int bcnt; + int bcnt, bpl_size; + + bpl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp), bpl_size); for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); @@ -761,7 +770,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, struct list_head *post_sblist, int sb_count) { struct lpfc_scsi_buf *psb, *psb_next; - int status; + int status, sgl_size; int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0; dma_addr_t pdma_phys_bpl1; int last_xritag = NO_XRI; @@ -773,6 +782,9 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, if (sb_count <= 0) return -EINVAL; + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + list_for_each_entry_safe(psb, psb_next, post_sblist, list) { list_del_init(&psb->list); block_cnt++; @@ -805,7 +817,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, post_cnt = block_cnt; } else if (block_cnt == 1) { /* last single sgl with non-contiguous xri */ - if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) + if (sgl_size > SGL_PAGE_SIZE) pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE; else @@ -925,13 +937,22 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) IOCB_t *iocb; dma_addr_t pdma_phys_fcp_cmd; dma_addr_t pdma_phys_fcp_rsp; - dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; + dma_addr_t pdma_phys_bpl; uint16_t iotag, lxri = 0; - int bcnt, num_posted; + int bcnt, num_posted, sgl_size; LIST_HEAD(prep_sblist); LIST_HEAD(post_sblist); LIST_HEAD(scsi_sblist); + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp)); + for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); if (!psb) @@ -950,6 +971,15 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) } memset(psb->data, 0, phba->cfg_sg_dma_buf_size); + /* Page alignment is CRITICAL, double check to be sure */ + if (((unsigned long)(psb->data) & + (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); + kfree(psb); + break; + } + /* Allocate iotag for psb->cur_iocbq. */ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); if (iotag == 0) { @@ -970,17 +1000,14 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; psb->fcp_bpl = psb->data; - psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + psb->fcp_cmnd = (psb->data + sgl_size); psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd + sizeof(struct fcp_cmnd)); /* Initialize local short-hand pointers. */ sgl = (struct sli4_sge *)psb->fcp_bpl; pdma_phys_bpl = psb->dma_handle; - pdma_phys_fcp_cmd = - (psb->dma_handle + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size); pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd); /* @@ -1022,10 +1049,6 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) iocb->ulpLe = 1; iocb->ulpClass = CLASS3; psb->cur_iocbq.context1 = psb; - if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) - pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE; - else - pdma_phys_bpl1 = 0; psb->dma_phys_bpl = pdma_phys_bpl; /* add the scsi buffer to a post list */ @@ -1270,6 +1293,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -2147,6 +2171,10 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, split_offset = 0; do { + /* Check to see if we ran out of space */ + if (num_bde >= (phba->cfg_total_seg_cnt - 2)) + return num_bde + 3; + /* setup PDE5 with what we have */ pde5 = (struct lpfc_pde5 *) bpl; memset(pde5, 0, sizeof(struct lpfc_pde5)); @@ -2215,6 +2243,10 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_bde >= phba->cfg_total_seg_cnt) + return num_bde + 1; + if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9065 BLKGRD:%s Invalid data segment\n", @@ -2499,6 +2531,10 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, split_offset = 0; do { + /* Check to see if we ran out of space */ + if (num_sge >= (phba->cfg_total_seg_cnt - 2)) + return num_sge + 3; + /* setup DISEED with what we have */ diseed = (struct sli4_sge_diseed *) sgl; memset(diseed, 0, sizeof(struct sli4_sge_diseed)); @@ -2558,6 +2594,10 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_sge >= phba->cfg_total_seg_cnt) + return num_sge + 1; + if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9086 BLKGRD:%s Invalid data segment\n", @@ -2713,28 +2753,28 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, return 1; lpfc_cmd->seg_cnt = datasegcnt; - if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9067 BLKGRD: %s: Too many sg segments" - " from dma_map_sg. Config %d, seg_cnt" - " %d\n", - __func__, phba->cfg_sg_seg_cnt, - lpfc_cmd->seg_cnt); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); switch (prot_group_type) { case LPFC_PG_TYPE_NO_DIF: + + /* Here we need to add a PDE5 and PDE6 to the count */ + if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt) + goto err; + num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, datasegcnt); /* we should have 2 or more entries in buffer list */ if (num_bde < 2) goto err; break; - case LPFC_PG_TYPE_DIF_BUF:{ + + case LPFC_PG_TYPE_DIF_BUF: /* * This type indicates that protection buffers are * passed to the driver, so that needs to be prepared @@ -2749,31 +2789,28 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, } lpfc_cmd->prot_seg_cnt = protsegcnt; - if (lpfc_cmd->prot_seg_cnt - > phba->cfg_prot_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9068 BLKGRD: %s: Too many prot sg " - "segments from dma_map_sg. Config %d," - "prot_seg_cnt %d\n", __func__, - phba->cfg_prot_sg_seg_cnt, - lpfc_cmd->prot_seg_cnt); - dma_unmap_sg(&phba->pcidev->dev, - scsi_prot_sglist(scsi_cmnd), - scsi_prot_sg_count(scsi_cmnd), - datadir); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* + * There is a minimun of 4 BPLs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 4) > + (phba->cfg_total_seg_cnt - 2)) + goto err; num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); /* we should have 3 or more entries in buffer list */ - if (num_bde < 3) + if ((num_bde < 3) || + (num_bde > phba->cfg_total_seg_cnt)) goto err; break; - } + case LPFC_PG_TYPE_INVALID: default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "9022 Unexpected protection group %i\n", prot_group_type); @@ -2814,10 +2851,22 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, return 0; err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9023 Could not setup all needed BDE's" - "prot_group_type=%d, num_bde=%d\n", + "9023 Cannot setup S/G List for HBA" + "IO segs %d/%d BPL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, prot_group_type, num_bde); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; return 1; } @@ -3255,6 +3304,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -3376,14 +3426,14 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl); IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; - uint32_t num_bde = 0; + uint32_t num_sge = 0; int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; int fcpdl; /* * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd - * fcp_rsp regions to the first data bde entry + * fcp_rsp regions to the first data sge entry */ if (scsi_sg_count(scsi_cmnd)) { /* @@ -3406,28 +3456,28 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, sgl += 1; lpfc_cmd->seg_cnt = datasegcnt; - if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9087 BLKGRD: %s: Too many sg segments" - " from dma_map_sg. Config %d, seg_cnt" - " %d\n", - __func__, phba->cfg_sg_seg_cnt, - lpfc_cmd->seg_cnt); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); switch (prot_group_type) { case LPFC_PG_TYPE_NO_DIF: - num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, + /* Here we need to add a DISEED to the count */ + if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt) + goto err; + + num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, datasegcnt); + /* we should have 2 or more entries in buffer list */ - if (num_bde < 2) + if (num_sge < 2) goto err; break; - case LPFC_PG_TYPE_DIF_BUF:{ + + case LPFC_PG_TYPE_DIF_BUF: /* * This type indicates that protection buffers are * passed to the driver, so that needs to be prepared @@ -3442,31 +3492,28 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, } lpfc_cmd->prot_seg_cnt = protsegcnt; - if (lpfc_cmd->prot_seg_cnt - > phba->cfg_prot_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9088 BLKGRD: %s: Too many prot sg " - "segments from dma_map_sg. Config %d," - "prot_seg_cnt %d\n", __func__, - phba->cfg_prot_sg_seg_cnt, - lpfc_cmd->prot_seg_cnt); - dma_unmap_sg(&phba->pcidev->dev, - scsi_prot_sglist(scsi_cmnd), - scsi_prot_sg_count(scsi_cmnd), - datadir); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + /* + * There is a minimun of 3 SGEs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 3) > + (phba->cfg_total_seg_cnt - 2)) + goto err; - num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, + num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, datasegcnt, protsegcnt); + /* we should have 3 or more entries in buffer list */ - if (num_bde < 3) + if ((num_sge < 3) || + (num_sge > phba->cfg_total_seg_cnt)) goto err; break; - } + case LPFC_PG_TYPE_INVALID: default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "9083 Unexpected protection group %i\n", prot_group_type); @@ -3501,10 +3548,22 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, return 0; err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9084 Could not setup all needed BDE's" - "prot_group_type=%d, num_bde=%d\n", - prot_group_type, num_bde); + "9084 Cannot setup S/G List for HBA" + "IO segs %d/%d SGL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, + prot_group_type, num_sge); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; return 1; } @@ -5317,11 +5376,11 @@ lpfc_slave_alloc(struct scsi_device *sdev) } num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc); if (num_to_alloc != num_allocated) { - lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, - "0708 Allocation request of %d " - "command buffers did not succeed. " - "Allocated %d buffers.\n", - num_to_alloc, num_allocated); + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "0708 Allocation request of %d " + "command buffers did not succeed. " + "Allocated %d buffers.\n", + num_to_alloc, num_allocated); } if (num_allocated > 0) phba->total_scsi_bufs += num_allocated; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index be02b59ea27..347e22c527b 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -346,11 +346,6 @@ struct lpfc_bmbx { #define SLI4_CT_VFI 2 #define SLI4_CT_FCFI 3 -#define LPFC_SLI4_FL1_MAX_SEGMENT_SIZE 0x10000 -#define LPFC_SLI4_FL1_MAX_BUF_SIZE 0X2000 -#define LPFC_SLI4_MIN_BUF_SIZE 0x400 -#define LPFC_SLI4_MAX_BUF_SIZE 0x20000 - /* * SLI4 specific data structures */ -- 2.20.1