From 96bb12deadac74ad1053d6bb704aaa33417b85a6 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Fri, 28 Oct 2016 15:54:10 +0800 Subject: [PATCH] pinctrl: at91: add support for OUTPUT config Add support for pin output control through the pinctrl config: - support enabling/disabling output on a given pin - support output level setting (high or low) Signed-off-by: Boris BREZILLON Acked-by: Nicolas Ferre Signed-off-by: Wenyou Yang Signed-off-by: Linus Walleij --- .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 ++ drivers/pinctrl/pinctrl-at91.c | 21 +++++++++++++++++++ include/dt-bindings/pinctrl/at91.h | 2 ++ 3 files changed, 25 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index b7a93e80a302..9a8a45d9d8ab 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -98,6 +98,8 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 01 - Low 10 - Medium 11 - High +OUTPUT (1 << 7): indicate this pin need to be configured as an output. +OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 9f0904185909..569bc28cb909 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -56,6 +56,9 @@ static int gpio_banks; #define DRIVE_STRENGTH_SHIFT 5 #define DRIVE_STRENGTH_MASK 0x3 #define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT) +#define OUTPUT (1 << 7) +#define OUTPUT_VAL_SHIFT 8 +#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT) #define DEBOUNCE (1 << 16) #define DEBOUNCE_VAL_SHIFT 17 #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) @@ -375,6 +378,19 @@ static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on) writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR)); } +static bool at91_mux_get_output(void __iomem *pio, unsigned int pin, bool *val) +{ + *val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1; + return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1; +} + +static void at91_mux_set_output(void __iomem *pio, unsigned int mask, + bool is_on, bool val) +{ + writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR)); + writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR)); +} + static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin) { return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1; @@ -848,6 +864,7 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev, void __iomem *pio; unsigned pin; int div; + bool out; *config = 0; dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id); @@ -875,6 +892,8 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev, if (info->ops->get_drivestrength) *config |= (info->ops->get_drivestrength(pio, pin) << DRIVE_STRENGTH_SHIFT); + if (at91_mux_get_output(pio, pin, &out)) + *config |= OUTPUT | (out << OUTPUT_VAL_SHIFT); return 0; } @@ -907,6 +926,8 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, if (config & PULL_UP && config & PULL_DOWN) return -EINVAL; + at91_mux_set_output(pio, mask, config & OUTPUT, + (config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT); at91_mux_set_pullup(pio, mask, config & PULL_UP); at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); if (info->ops->set_deglitch) diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index bbca3d038900..2732d6c0fb39 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -15,6 +15,8 @@ #define AT91_PINCTRL_DEGLITCH (1 << 2) #define AT91_PINCTRL_PULL_DOWN (1 << 3) #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_OUTPUT (1 << 7) +#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) -- 2.20.1